VÄIKE RÕNGAS 3669-CF

SmallRig Advanced Camera Cage Kit Instruction Manual

Mudel: 3669-CF

1. Sissejuhatus

This manual provides detailed instructions for the assembly, operation, and maintenance of the SmallRig Advanced Camera Cage Kit (Model 3669-CF). This kit is designed to enhance stability during handheld shooting and offers a wide range of accessory mounting options for Sony Alpha 7 V, Alpha 7R V, Alpha 7 IV, and Alpha 7 S III cameras.

2. Mis on karbis

The SmallRig Advanced Camera Cage Kit includes the following components:

  • 1 x puur
  • 1 x HDMI Cable Tie
  • 1 x Locating Handle for ARRI
  • 1 x külgmine käepide
  • 1 x kuuskantvõti
Contents of the SmallRig Advanced Camera Cage Kit

Image: All components included in the SmallRig Advanced Camera Cage Kit.

3. Seadistamine ja kokkupanek

Follow these steps to correctly assemble and attach the cage kit to your camera.

3.1. Kaamera ettevalmistamine

  • Ensure your camera's lens is removed or a small lens is attached to allow clearance during cage installation.
  • For cameras like the Sony Alpha 7S III or Alpha 7 IV, remove the split ring (shoulder strap hook) on the left side of the camera to use the side locking plate.

3.2. Attaching the Camera Cage

  1. Align your Sony Alpha 7 V, A7R V, A7 IV, or A7S III camera with the cage.
  2. Slide the camera into the cage.
  3. Secure the camera to the cage using the integrated 1/4"-20 screw located at the bottom of the cage. Use the provided hex key for tightening.
  4. Depending on your camera model, attach the appropriate side locking plate (one for Alpha 7S III, one for Alpha 7 IV) to prevent twisting. These plates attach to the camera's strap eyelet.
  5. Ensure the camera is firmly seated and does not move within the cage.
SmallRig cage attached to a Sony Alpha camera, showing the three-point locking mechanism.

Image: Three-Point Locking mechanism for securing the camera within the cage.

SmallRig cage with modular design, showing different locking sliders for various Sony Alpha camera models.

Image: Wide compatibility with modular design, illustrating the different locking sliders for various Sony Alpha cameras.

Video: Demonstration of attaching the SmallRig cage to a Sony A7IV camera.

3.3. Attaching the HDMI Cable Clamp

  1. Leidke HDMI-kaabel clamp.
  2. Paigaldage clamp onto the left side of the cage using the 1/4"-20 screw and two locating pins.
  3. Sisestage HDMI-kaabel pistikupessaamp and tighten the thumbscrew to secure it. This prevents accidental disconnections and protects the camera's HDMI port.

Note: This cable clamp is not compatible with Sony Alpha 1. When used on the Alpha 7R V camera, the HDMI Cable Clamp interferes with the synchroterminal interface.

SmallRig HDMI cable clamp attached to the camera cage, securing an HDMI cable.

Image: HDMI Cable Clamp included with the kit, demonstrating its attachment and function.

3.4. Attaching the Top Handle

  1. The top handle attaches to the top of the cage via a standard ARRI locating mount.
  2. Align the handle with the ARRI locating holes on the top of the cage and secure it with the integrated screw.
SmallRig ergonomic top handle with multiple mounting points.

Image: Ergonomic top handle design, showing various threaded holes and cold shoe mount.

3.5. Attaching the Side Handgrip

  1. The side handgrip attaches to the NATO rail on the side of the cage.
  2. Lõdvendage klamp on the side handgrip, slide it onto the NATO rail, and tighten the clamp to secure it in your desired position.
  3. The height of the handgrip can be adjusted vertically for optimal comfort.
SmallRig aluminum side handle with silicone grip, showing mounting points and adjustment mechanism.

Image: Aluminum side handle, highlighting its comfortable grip and adjustable mounting.

4. Operating the Camera Cage Kit

The SmallRig Advanced Camera Cage Kit provides enhanced functionality and protection for your camera.

4.1. Enhanced Stability and Handling

  • Ülemine käepide: Ideal for low-angle shots and easy carrying. It reduces arm strain during extended shooting sessions.
  • Side Handgrip: Features a silicone insert for a better grip, increasing stability for handheld shooting. It can be adjusted vertically for optimal comfort.

4.2. Multiple Mounting Points

The cage offers various mounting interfaces for attaching accessories:

  • 1/4"-20 keermestatud augud: Numerous points for attaching monitors, magic arms, lights, and other accessories.
  • 3/8"-16 ARRI kinnitusavad: Provides secure, anti-twist mounting for ARRI-standard accessories.
  • Külmade jalanõude kinnitused: Integrated cold shoe mounts on the cage and handles for microphones, LED lights, and other shoe-mounted accessories.
  • NATO raudtee: Located on the side of the cage for quick attachment and detachment of NATO-compatible accessories, such as the side handgrip.
  • Rihma pesad: Allows for attachment of neck or hand straps (sold separately).
  • QD-pistikupesa: For quick-release sling swivels.
SmallRig camera cage highlighting various mounting points including 1/4-20 threads, 3/8-16 ARRI locating holes, cold shoes, and NATO rail.

Image: Multiple mounting points available on the camera cage for various accessories.

4.3. Unobstructed Access

The cage is designed to maintain full access to the camera's controls, buttons, hot shoe, and battery compartment, allowing for quick battery changes without removing the camera from the cage.

SmallRig cage showing access to camera controls and battery door.

Image: The cage design ensures precise holes and accurate calibration for full access to camera controls and battery.

5. Hooldus

  • Regularly inspect all screws and connections to ensure they are tight. Use the provided hex key for tightening.
  • Puhastage puuri pehme ja kuiva lapiga. Vältige abrasiivseid puhastusvahendeid või lahusteid, mis võivad viimistlust kahjustada.
  • Store the cage in a dry, dust-free environment when not in use.
  • The built-in protective pads should be checked periodically for wear and tear.

6. Veaotsing

  • Camera not fitting securely: Ensure the correct side locking plate is used for your specific camera model (Alpha 7S III or Alpha 7 IV). Verify that the integrated 1/4"-20 screw at the bottom is fully tightened.
  • HDMI-kaabel Clamp häired: If using the Alpha 7R V camera, be aware that the HDMI Cable Clamp may interfere with the synchroterminal interface. Adjust placement or consider alternative cable management if necessary. The clamp is not compatible with Sony Alpha 1.
  • Lisatarvikud ei ole kindlalt kinnitatud: Check that the accessory's mounting screw or mechanism matches the cage's interface (e.g., 1/4"-20, 3/8"-16 ARRI, cold shoe, NATO rail). Ensure all screws are tightened.

7. Tehnilised andmed

FunktsioonDetail
Mudeli number3669-CF
ÜhilduvusSony Alpha 7 V, Alpha 7R V, Alpha 7 IV, Alpha 7 S III
MaterjalAlumiiniumisulam, roostevaba teras, silikoon
Toote mõõtmed8.33" S x 6.95" L x 5.31" K (211.5 x 176.5 x 135 mm)
Kauba kaal1.23 naela (556 grammi)
VärvMust
Paigalduspunktid1/4"-20 threads, 3/8"-16 ARRI locating holes, Cold Shoe, NATO Rail, QD Socket

8. Garantii ja tugi

For warranty information and technical support, please visit the official SmallRig webveebisaidilt või võtke ühendust nende klienditeenindusega. Hoidke ostutšekk alles garantiinõuete esitamiseks.

Official SmallRig Store: SmallRig pood Amazonis

Seotud dokumendid - 3669-CF

Preview SmallRig Full Cage 3667B Sony Alpha 7R V/IV, 7 IV, 7S III, 1 jaoks - Kasutusjuhend
Sony Alpha 7R V, Alpha 7 IV, Alpha 7S III, Alpha 1 ja Alpha 7R IV kaameratele mõeldud SmallRig 3667B täispuuri üksikasjalikud kasutusjuhised ja spetsifikatsioonid. Lisateavet funktsioonide, ohutuse, ühilduvuse ja kinnitusvõimaluste kohta.
Preview SmallRig universaalne statiivikandur CCP2646 kaamerapuur - kasutusjuhend
Kasutusjuhend ja spetsifikatsioonid SmallRig Universal Tripod Dolly CCP2646 kaamerapuurile, mis on mõeldud Panasonic Lumix GH5, GH5 II ja GH5S kaameratele. Funktsioonide hulka kuuluvad kaitse, lisatarvikute kinnitus ja ohutusjuhised.
Preview SmallRig kaamerapuur Sony Alpha 7S III (2999) jaoks - kasutusjuhend
Sony Alpha 7S III kaamera jaoks mõeldud SmallRig kaamerapuuri (mudel 2999) üksikasjalikud kasutusjuhised ja spetsifikatsioonid. Siit leiate teavet kinnituspunktide, ohutusjuhiste ja toote üksikasjade kohta.
Preview SmallRig Cage Kit for Sony FX2 - Operating Instruction
Comprehensive operating instructions, product details, specifications, and warranty information for the SmallRig Cage Kit designed for the Sony FX2 camera. Includes installation guides for various components and compliance details.
Preview SmallRig puur Sony Alpha 9 III (mudel 4533) jaoks Kasutusjuhend
Sony Alpha 9 III kaamera jaoks mõeldud SmallRig Cage'i (mudel 4533) kasutusjuhend. Sisaldab üksikasjalikke paigaldusjuhiseid, toote omadusi ja tehnilisi andmeid.
Preview SmallRig Cage õhugaTag Sony Alpha 7R V/7 IV/7S III kaamera pesa
SmallRig Cage with Airi kasutusjuhend ja toote üksikasjadTag Pesa, mis on mõeldud Sony Alpha 7R V, 7 IV, 7S III ja 1/7R IV kaameratele. Sisaldab tehnilisi andmeid, paigaldusjuhiseid ja toote komponente.