AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Toote lõppview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Peamised omadused:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Tehnilised andmed

3. Seadistusjuhend

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Lahtipakkimine

1. Eemaldage arvuti korpus ettevaatlikult pakendist.
2. Remove any protective films or internal packaging materials.
3. Asetage ümbris stabiilsele ja tasasele pinnale.

3.2 Emaplaadi paigaldamine

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Paigaldage I/O-kilp (kui see pole teie emaplaadile eelinstallitud) korpuse tagumisse avasse.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Kinnitage emaplaat kaasasolevate kruvide abil.

3.3 Toiteallika paigaldamine

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Kinnitage toiteplokk korpuse tagaküljelt kruvidega.

3.4 Salvestusketta paigaldamine

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Eemaldage korpuse tagaküljelt vajalikud laienduspesa katted.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Jahutussüsteem

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Kaablihaldus

Kasutage kaablite korrastamiseks emaplaadi sahtli taga olevaid kaablikanalite väljalõikeid ja kinnituspunkte. See parandab õhuvoolu ja esteetikat.

4. Kasutusjuhised

4.1 Sisse-/väljalülitamine

• To power on your PC, press the Võimsus nupp, mis asub ülemisel paneelil.
• To power off, either shut down through your operating system or press and hold the Võimsus nuppu mõneks sekundiks.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• USB 3.0 port (x1): Kiire andmeedastuse jaoks.
• USB 2.0 pordid (x2): Välisseadmete ühendamiseks.
• Mikrofoni pesa: Heli sisendiks.
• HD Audio Jack: For audio output (headphones/speakers).
• Lähtestamisnupp: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Hooldus

Regulaarne hooldus aitab tagada arvuti komponentide optimaalse jõudluse ja pikaealisuse.

5.1 Tolmufiltri puhastamine

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Üldpuhastus

• Pühkige korpuse välispind pehme lapigaamp riie. Vältige abrasiivseid puhastusvahendeid.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Veaotsing

Kui teil tekib probleeme arvuti korpusega, kaaluge järgmisi levinud tõrkeotsingu samme.

• Toide puudub: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Ventilaatorid ei pöörle/RGB ei tööta: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Ülekuumenemine: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Esipaneeli pordid ei tööta: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Garantii ja tugi

7.1 Garantii teave

The AeroCool HEXFORMBKV2 PC case comes with a 2-aastane garantii for parts. Please retain your proof of purchase for warranty claims.

7.2 Tehniline tugi

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's websaidil või toote pakendil.

• AeroCooli ametlik Websait: www.aerocool.io
• Klienditoe e-post: support@aerocool.io (Ntample, please verify on official websait)