1. Sissejuhatus
This manual provides essential information for the safe and efficient operation of your EPEVER 3000W Pure Sine Wave Inverter. This inverter converts 24V DC power to 110V AC power, suitable for various off-grid applications. It features a double closed-loop control algorithm for fast response and load impact resistance, ensuring stable and reliable power output.
Põhifunktsioonide hulka kuuluvad:
- 3000W continuous power output, 6000W surge power for 5 seconds.
- Ühildub 24V liitium- ja pliiakudega.
- Rotatable LCD meter for monitoring and parameter configuration.
- Remote control capability via phone apps and PC software.
- Built-in electronic safeguards for comprehensive protection.
2. Ohutusjuhised
Read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Veenduge, et muundur on korralikult maandatud.
- Ärge jätke inverterit vihma, lume, pritsmete ega liigse tolmu kätte.
- Install the inverter in a well-ventilated area to prevent overheating.
- Ärge avage inverterit casing; sees ei ole kasutaja poolt hooldatavaid osi.
- Enne mis tahes juhtmestiku või hooldustööde tegemist ühendage kõik toiteallikad lahti.
- Kasutage kõigi ühenduste jaoks sobivaid juhtmediameetriid, et vältida ülekuumenemist ja tagada tõhus energiaülekanne.
- Hoidke lapsed inverterist ja selle ühendustest eemal.
3. Toote komponendid
Familiarize yourself with the various parts of your EPEVER inverter:
4. Seadistamine ja installimine
Follow these steps for proper installation of your inverter:
4.1 Paigaldamine
- Valige kuiv, hästi ventileeritav koht, eemal otsesest päikesevalgusest ja soojusallikatest.
- Ensure adequate clearance around the inverter for airflow (minimum 150mm on all sides for air intake and outlet).
- Mount the inverter securely to a stable surface using appropriate fasteners.
4.2 Juhtmete ühendamine
The inverter features a push-on terminal design for easy wire installation without a screwdriver for the AC output. For DC input, use the screw terminals.
- Maandus: Connect the grounding terminal (10) to an earth ground.
- DC sisend: Connect the positive (1) and negative (2) DC input terminals to your 24V battery bank. Ensure correct polarity.
- AC väljund: Connect your AC loads to the AC outlet (5). The push-on terminals simplify this connection.
- Valikulised ühendused: Connect the RS485 communication port (6) or USB output port (7) for remote monitoring or charging devices.
4.3 Aku ühilduvus
The inverter is compatible with both 24V lithium and lead-acid batteries (AGM/GEL/LFP).
5. Kasutusjuhised
5.1 Sisse-/väljalülitamine
- To power on, ensure all connections are secure, then press the inverter switch (9). The LCD will illuminate.
- To power off, press the inverter switch (9) again.
5.2 LCD-ekraan ja juhtnupud
The rotatable LCD meter (4) provides real-time status and allows parameter configuration.
5.3 Kaugseire
The inverter supports remote control and monitoring via phone applications and PC software using the RS485 communication port (6) or an optional eBox-WIFI-01 module.
5.4 Load Compatibility
The inverter is suitable for a wide range of daily appliances. Ensure the total wattage of connected appliances does not exceed the inverter's rated power.
6. Hooldus
Regulaarne hooldus tagab teie inverteri optimaalse jõudluse ja pikaealisuse.
- Puhastamine: Puhastage inverteri välispinda regulaarselt kuiva lapiga. Veenduge, et ventilatsiooniavad oleksid tolmust ja prahist vabad.
- Ühendused: Check all electrical connections regularly to ensure they are tight and free from corrosion.
- Keskkond: Maintain a suitable operating environment, avoiding extreme temperatures and humidity.
7. Veaotsing
Kui teil tekib inverteriga probleeme, vaadake järgmisi levinud probleeme ja lahendusi:
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Inverter ei lülitu sisse | No DC input power; Loose battery connections; Low battery voltage | Kontrollige aku ühendusi ja voltage; Ensure battery is charged; Verify inverter switch is ON. |
| Vahelduvvoolu väljund puudub | Overload; Short circuit; Over-temperature; Inverter fault | Reduce load; Check for short circuits in AC wiring; Allow inverter to cool; Check fault indicator on LCD. |
| Fault indicator (red) is on | Internal fault; Input/output protection triggered | Refer to the LCD display for specific error codes if available; Disconnect loads and restart inverter; If fault persists, contact support. |
| Madal väljundvõimsus | Aku tühjeneminetage; Excessive load; Poor DC connections | Charge battery; Reduce load; Tighten DC connections. |
8. Tehnilised andmed
| Spetsifikatsioon | Väärtus |
|---|---|
| Kaubamärk | IGAGI |
| Mudeli nimi | 3000W |
| Hinnatud sisend Voltage | 24VDC |
| Väljund Voltage | 110VAC (±3%); 120VAC (-7%~+3%) |
| Väljundsagedus | 50/60 Hz ±0.2% |
| Pidev väljundvõimsus | 3000 vatti |
| Peak Output Power (Surge) | 6000 vatti (5 sekundit) |
| Electrical Output Waveform | Puhas sinine laine |
| USB väljund | 5VDC/Max.1A |
| RS485 sideport | 5VDC / 200mA |
| Ühilduvad akutüübid | 24V Lithium and Lead-acid battery |
| Turustusvõimaluste arv | 1 |
| Energy Specifications Met | IEC62109, EN61000, RoHS |
| Kauba kaal | 23.2 naela |
9. Garantii teave
This EPEVER inverter comes with a 1-aastane garantii from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
10. Klienditugi
For technical assistance, troubleshooting, or warranty inquiries, please contact EPEVER customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (3000W) and purchase details ready.
