lightmaXX Vega BAT LED 4x12 W RGBAWUV

lightmaXX Vega BAT LED 4x12 W RGBAWUV Kasutusjuhend

Battery-Powered LED Spot

1. Sissejuhatus

1.1 Toode on üleview

The lightmaXX Vega BAT LED is a versatile, battery-powered uplight designed for various lighting applications. It features four 12-watt RGBAWUV (Red, Green, Blue, Amber, White, UV) LEDs, providing a broad spectrum of color mixing capabilities. With an 80W power output, this fixture supports both 6 and 10 DMX channels for precise control in professional setups. Operating modes include automatic programs, sound-activated effects, master/slave configurations, and convenient control via an infrared (IR) remote.

1.2 Ohutusalane teave

  • Ühendage seade alati maandatud pistikupessa.
  • Ärge avage korpust; sees ei ole kasutaja poolt hooldatavaid osi. Pöörduge kogu hoolduse poole kvalifitseeritud personali poole.
  • Vältige silma otsest kokkupuudet valgusallikaga.
  • Tagage seadme ümber piisav ventilatsioon, et vältida ülekuumenemist.
  • Hoidke seadet niiskuse ja äärmuslike temperatuuride eest kaitstult.
  • See seade peab olema maandatud.

2. Pakendi sisu

Please check that all items listed below are present and in good condition upon unpacking:

  • lightmaXX Vega BAT LED 4x12 W RGBAWUV unit
  • IR kaugjuhtimispult
  • Toitekaabel
  • Kasutusjuhend (see dokument)
Power cable for the lightmaXX Vega BAT LED

2.1. pilt: Power cable with a standard European plug and a blue locking connector for the light fixture.

Infrared remote control for the lightmaXX Vega BAT LED

2.2. pilt: Infrared remote control with various color, mode, and numerical buttons for operating the LED spot.

3. Seadistamine

3.1 Esmane laadimine

Before first use, fully charge the internal battery. Connect the provided power cable to the unit's power input and then to a suitable 240V AC power outlet. The charging indicator (if available on the display) will show the charging status. A full charge typically takes several hours.

3.2 Paigutus

Position the Vega BAT LED on a stable, flat surface or mount it using appropriate clamps and safety cables (not included) to a truss or stand. Ensure the unit is placed in a location with good air circulation and away from direct heat sources or flammable materials.

3.3 Ühendused

For standalone operation, simply power on the unit after charging. For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the Vega BAT LED. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on.

Altpoolt view of the lightmaXX Vega BAT LED with power input and DMX ports

3.1. pilt: Altpoolt view of the light fixture showing the power input, DMX ports, and regulatory labels.

4. Operatsioon

4.1 Juhtpaneel

The unit features an onboard control panel with a display and four buttons: MENU, DOWN, UP, and ENTER. This panel allows for direct access to settings and operating modes.

Esiosa view of the lightmaXX Vega BAT LED control panel

4.1. pilt: Esiosa view of the control panel with display and navigation buttons.

Üles view of the lightmaXX Vega BAT LED control panel

4.2. pilt: Üles view of the control panel, showing the display and button layout.

  • MENÜÜ: Liigub läbi peamenüü valikute.
  • ALLA: Decreases values or navigates down through menu options.
  • ÜLES: Increases values or navigates up through menu options.
  • SISENEMA: Kinnitab valikuid või siseneb alammenüüdesse.

4.2 IR kaugjuhtimispult

The included IR remote control provides convenient wireless operation for various functions, including color selection, mode changes, and power on/off.

  • SISSE/VÄLJA: Lülitab seadme sisse või välja.
  • R, G, B, A, W, UV: Direct access to Red, Green, Blue, Amber, White, and Ultraviolet colors.
  • 0-9: Numerical buttons for selecting specific programs or DMX addresses.
  • AUTOMAATNE: Activates automatic program mode.
  • STROBE: Activates strobe effect.
  • FADE: Aktiveerib värvide tuhmumise režiimi.
  • HELI: Aktiveerib heliga aktiveeritava režiimi.

4.3 töörežiimid

The Vega BAT LED offers several operating modes:

  • Automaatrežiim: The unit cycles through pre-programmed color changes and effects. Selectable via the control panel or IR remote.
  • Helirežiim: The light reacts to ambient sound, creating dynamic effects. Sensitivity can often be adjusted via the control panel.
  • Ülem/alluv režiim: Link multiple units where one acts as the master, controlling all connected slave units. Connect DMX cables in a daisy chain.
  • DMX režiim: For professional control using a DMX controller. The unit supports 6 or 10 DMX channels, allowing for granular control over color mixing, dimming, strobe, and internal programs. Set the DMX address via the control panel.
lightmaXX Vega BAT LED displaying UV light

4.3. pilt: The light fixture emitting ultraviolet (UV) light.

lightmaXX Vega BAT LED displaying amber light

4.4. pilt: The light fixture emitting amber-colored light.

5. Hooldus

5.1 Puhastamine

Regularly clean the lens and exterior housing with a soft, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used. Do not use abrasive cleaners or solvents, as they may damage the finish or optical components.

5.2 Aku hooldus

To prolong battery life, avoid fully discharging the unit frequently. If storing the unit for an extended period, ensure the battery is charged to approximately 50-70% and recharge it every 3-6 months. Store in a cool, dry place.

5.3 Säilitamine

When not in use, store the Vega BAT LED in its original packaging or a suitable protective case to prevent damage from dust, moisture, and impacts.

6. Veaotsing

  • Seade ei lülitu sisse: Ensure the battery is charged or the power cable is securely connected to a live outlet. Check the power switch.
  • No light output: Verify the unit is powered on and not in standby mode. Check selected operating mode and brightness settings.
  • IR remote not working: Ensure there are no obstructions between the remote and the unit's IR receiver. Check the remote's battery.
  • DMX control issues: Verify DMX cable connections, DMX address settings on the unit, and DMX channel mode. Ensure your DMX controller is functioning correctly.
  • Aku tööiga on lühike: The battery may require a full charge cycle. Over time, battery capacity can decrease; consider battery replacement if performance significantly degrades.

7. Tehnilised andmed

FunktsioonSpetsifikatsioon
KaubamärklightmaXX
MudelVega BAT LED 4x12 W RGBAWUV
Valgusallikas4 x 12W RGBAWUV LEDs
Kokku Wattage80W
DMX kanalid6 või 10 kanalit
TöörežiimidAutomatic, Sound, Master/Slave, DMX
KontrolliOnboard display/buttons, IR Remote
Voltage240 volti
Toote mõõtmed24.2 x 21 x 19.6 cm
Tootja viideLIG0016385-000
PäritoluriikSaksamaa
Esimene saadaval16. august 2021

8. Garantii ja tugi

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized lightmaXX dealer. Keep your proof of purchase for warranty claims.