aigo AZ300 Mid Tower Computer Case User Manual

1. Sissejuhatus

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Ohutusalane teave

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Karastatud klaasist paneele käsitsege ettevaatlikult. Need on habras ja võivad kukkudes või löögi korral puruneda.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Hoidke väikesed osad ja kruvid lastele kättesaamatus kohas.
• Elektriohu vältimiseks veenduge õige maandus.

3. Toote lõppview

3.1 Esipaneeli sisend-/väljundpaneel

The front I/O panel provides convenient access to essential ports and controls.

Joonis 2: Esipaneeli I/O paigutus

• C-tüüpi tüüp: 1x USB Type-C port for modern connectivity.
• USB 2.0 port: 1x USB 2.0 port for peripheral connections.
• USB 3.0 port: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Lähtestamise/LED-nupp: Resets the system or controls LED lighting (if applicable).
• Toitenupp: Lülitab arvuti sisse või välja.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Emaplaadi ühilduvus: Toetab ATX, Micro-ATX ja ITX emaplaate.
• Salvestusketta lahtrid: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• GPU pikkus: Maximum GPU length of 400mm.
• PSU Length: Supports standard ATX power supplies up to 200mm.

4. Paigaldusjuhend

4.1 Juhtumi ettevalmistamine

1. Asetage ümbris tasasele ja stabiilsele pinnale.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Emaplaadi paigaldamine

1. Paigaldage I/O-kaitse (kui see pole eelpaigaldatud) korpuse tagumisse avasse.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Kinnitage emaplaat kaasasolevate kruvidega.

Figure 5: Motherboard Mounting Areas

4.3 Toiteploki (PSU) paigaldamine

1. Leidke toiteploki kinnituskoht korpuse tagaosas allosas.
2. Slide your ATX power supply into the designated slot.
3. Kinnitage toiteplokk tagantpoolt kruvidega korpuse külge.

4.4 Salvestusketta paigaldamine

1. 2.5-tollised SSD-d: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5-tollised kõvakettad: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Eemaldage korpuse tagaküljelt vajalikud laienduspesa katted.
2. Sisestage graafikakaart või muud laienduskaardid emaplaadi vastavatesse PCIe-pesadesse.
3. Kinnitage kaardid kruvidega.

4.6 Jahutussüsteemi paigaldamine

The aigo AZ300 supports flexible cooling configurations.

• Fännide tugi: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Radiaatori tugi: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Kaablihaldus

Kasutage emaplaadi sahtli taga olevaid kaablite suunamise väljalõikeid ja kinnituspunkte kaablite haldamiseks, et parandada õhuvoolu ja välimust.

5. Operatsioon

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Hooldus

Regular maintenance helps ensure optimal performance and longevity of your computer components.

6.1 Tolmufiltri puhastamine

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• PSU tolmufilter: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Veaotsing

• Süsteem ei lülitu sisse: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Kuvarit pole: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Ülekuumenemine: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB-pordid ei tööta: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Tehnilised andmed

9. Garantii ja tugi

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo websaidile.