Hbada J301 Ergonomic Office Chair User Manual

1. Sissejuhatus

Thank you for choosing the Hbada J301 Ergonomic Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read it thoroughly before use and retain it for future reference.

The Hbada J301 office chair is designed for comfort and support during extended periods of sitting. Key features include adjustable lumbar support, flip-up armrests for space-saving, seat height adjustment, 360-degree swivel, and a rocking function.

2. Ohutusalane teave

• Enne kasutamist veenduge, et kõik komponendid on kindlalt kinnitatud.
• Ärge seiske toolil.
• Ärge kasutage tooli ebatasasel pinnal.
• Reguleerimise ajal hoidke käed ja jalad liikuvatest osadest eemal.
• Maximum static load capacity is approximately 120 kg (265 lbs). Do not exceed this limit.
• Hoidke lapsed tooli kokkupaneku ja reguleerimise ajal sellest eemal.

3. Pakendi sisu

Enne kokkupaneku alustamist veenduge, et kõik osad on olemas. Kui mõni osa on puudu või kahjustatud, võtke ühendust klienditoega.

• Seljatoe kokkupanek
• Seat Cushion Assembly with Armrests
• Gaasi tõste silinder
• Base (5-star nylon base)
• Casters (5x PU casters)
• Mehhanismi plaat
• Riistvarakomplekt (kruvid, seibid, kuuskantvõti)

4. Seadistamine ja kokkupanek

Follow these steps to assemble your Hbada J301 office chair. Assembly typically takes 15-30 minutes.

1. Kinnitage rattad alusele: Insert each of the five casters into the holes at the end of the chair base arms. Push firmly until they click into place.
2. Sisestage gaasitõstuk: Place the gas lift cylinder into the central hole of the assembled base.
3. Kinnitage mehhanismiplaat istmele: Joondage mehhanismi plaat istmepadja alumisel küljel olevate eelnevalt puuritud aukudega. Kinnitage see kaasasolevate kruvide ja kuuskantvõtme abil. Veenduge, et mehhanismi esikülg oleks suunatud istme esiosa poole.
4. Seljatoe kinnitamine istmele: Connect the backrest to the seat assembly. Secure it with the appropriate screws.
5. Ühendage istmekomplekt gaasitõstukiga: Asetage kokkupandud iste ja seljatugi ettevaatlikult gaasitõstuki silindrile, veendudes, et see on tsentreeritud ja stabiilne.

Joonis 1: Chair Dimensions. This image illustrates the overall dimensions of the Hbada J301 chair, including height, width, and depth, from both front and side perspectives, aiding in space planning and fit.

5. Kasutusjuhised

5.1. Istme kõrguse reguleerimine

Istme kõrguse reguleerimiseks leidke istme all paremal küljel asuv hoob. Istudes tõmmake istme langetamiseks hoob üles. Istme tõstmiseks tõuske kergelt püsti ja tõmmake hoob üles. Vabastage hoob soovitud kõrgusel.

5.2. Nimmetoe reguleerimine

The chair features an adjustable lumbar support. The butterfly-shaped lumbar pillow gently supports your waist. The lumbar support can be adjusted vertically by approximately 5 cm to match your back's curve.

Joonis 2: Lumbar Support Adjustment. This image highlights the adjustable lumbar support system, showing its vertical adjustment range and the mesh material for breathability.

5.3. Ülestõstetavad käetoed

The armrests can be flipped up to allow the chair to be pushed closer to a desk, saving space. Simply lift the armrests upwards until they lock into a vertical position. To return them to the horizontal position, pull them down.

Joonis 3: Flip-Up Armrests for Space Saving. This image demonstrates how the chair's armrests can be rotated upwards, allowing the chair to be neatly tucked under a desk, optimizing space in smaller rooms.

5.4. Kiikumisfunktsioon

The chair features a rocking function with an approximate 15-degree recline. To activate, pull out the lever on the left side, beneath the seat. Push the lever in to lock the chair in an upright position. The tension of the rocking mechanism can be adjusted by rotating the round knob located under the seat.

Joonis 4: Rocking Function and Tension Adjustment. This image illustrates the chair's rocking capability, showing the lever used to engage/disengage the function and the knob for adjusting the recline tension.

5.5. 360-kraadine pöörlemine

The chair seat and backrest assembly can rotate 360 degrees, providing flexibility and ease of movement in your workspace.

6. Hooldus

6.1. Puhastamine

• Mesh Backrest and Seat: Pühkige koos reklaamigaamp riie ja pehme seep. Vältige tugevaid kemikaale.
• Base and Armrests: Puhastage pehme, damp riie.
• Rattad: Regularly check casters for accumulated hair, dust, or debris. Remove any obstructions to ensure smooth rolling.

6.2. Üldhooldus

• Kontrollige regulaarselt kõiki kruvisid ja polte, et need oleksid kindlalt kinni. Vajadusel pingutage uuesti.
• Avoid exposing the chair to direct sunlight for prolonged periods to prevent material degradation.
• Do not use abrasive cleaners or tools that could scratch the chair's surfaces.

7. Veaotsing

If you encounter any issues with your Hbada J301 chair, refer to the following common problems and solutions:

8. Tehnilised andmed

• Mudel: J301 (HDNY163GM/JP)
• Mõõdud (L x S x K): 60 cm x 60 cm x 100-110 cm
• Istme kõrguse vahemik: 46 cm - 56 cm
• Kaal: Umbes 12 kg
• Staatiline kandevõime: Umbes 120 kg
• Materjalid: Breathable mesh, high-density urethane foam, reinforced nylon base, silent PU casters
• Käetoed: Ülespööratav disain
• Lamamisfunktsioon: Approximately 15-degree rocking

Joonis 5: Chair Material Breakdown. This image details the high-quality materials used in the chair's construction, such as the TUV-5 certified gas lift, durable nylon base, and silent PU casters, ensuring safety and comfort.

9. Garantii ja tugi

The Hbada J301 office chair comes with a 3-aastane garantii on the product body, covering repair or replacement for manufacturing defects. This warranty is provided free of charge.

For customer support, warranty claims, or inquiries, please contact your retailer or the Hbada customer service team through the official webostukohas esitatud veebisaidi või kontaktandmete kaudu.

Palun hoidke oma ostutõend garantii kehtivuse tagamiseks alles.