Sissejuhatus
The SHARP Digital Alarm Clock with AccuSet is designed for effortless timekeeping. Featuring automatic time setting, a clear LED display, and user-friendly controls, this clock is ideal for any bedroom. Its AccuSet technology ensures the time is always accurate, eliminating the need for manual adjustments, making it perfect for seniors, children, or anyone seeking a hassle-free alarm clock solution.
Joonis 1: Esiosa view of the SHARP Digital Alarm Clock with green LED display.
Põhifunktsioonid
- AccuSet automaatne aja seadistamine: The clock is pre-programmed to automatically set the correct time, removing the need for manual adjustments. Simply select your time zone.
- Kiire suveaja (DST) muutmine: A convenient switch allows for easy adjustment for Daylight Savings Time (+1 hour) or Standard Time (-1 hour).
- Kõrge/madala dimmeri juhtimine: Adjust the brightness of the LED display to your preference, ensuring comfortable viewpäeval või öösel.
- Aku varundamine: A pre-installed CR2032 button cell battery provides backup for time settings during power outages, ensuring continuous accuracy.
- Ajavööndi valik: Easily select your local time zone from the options provided at the bottom of the clock.
Figure 2: Diagram illustrating the key features and functionalities of the alarm clock.
Seadistusjuhend
- Lahtipakkimine: Carefully remove the alarm clock from its packaging.
- Battery Installation (Pre-installed): The CR2032 button cell battery for backup is pre-installed in a screw-secured cabinet at the bottom of the clock. This battery is designed to last for several years. No immediate action is required for initial setup.
- Ajavööndi valik: Before plugging in the clock, locate the time zone selection switch at the bottom of the unit. Select your correct time zone (e.g., EST, CST, MST, PST). The default time zone is Eastern Standard Time.
- Toiteühendus: Plug the clock into an approved electrical source. The AccuSet feature will automatically program the correct time based on your selected time zone.
- Daylight Savings Time (DST) Adjustment: If applicable, slide the DST switch at the bottom of the clock to "ON" to add one hour (+1 hr) for Daylight Savings Time. For Standard Time, slide the switch to "OFF" to subtract one hour (-1 hr).
Figure 3: Top panel controls for setting time, alarm, and adjusting display.
Kasutusjuhised
Alarmi seadistamine
- Vajutage nuppu ALARM button once. The alarm time will appear on the display.
- Kui kuvatakse äratuse kellaaeg, vajutage nuppu TUND nuppu äratustundide reguleerimiseks.
- Vajutage nuppu MINUT nuppu, et reguleerida äratusminutit.
- Äratuse aktiveerimiseks või deaktiveerimiseks vajutage ALARM ON / OFF button. An alarm indicator light (usually a small LED) will illuminate when the alarm is active.
- To return to the current time display, press the AEG button or wait a few seconds for it to revert automatically.
Edasilükkamise funktsiooni kasutamine
Kui äratuskell kõlab, vajutage suurt nuppu UINAK button located on the top of the clock. This will temporarily silence the alarm for a set period (typically 9 minutes), allowing for extra rest. The alarm will sound again after the snooze period ends.
Adjusting Display Brightness (Dimmer Control)
The clock features a High/Low dimmer control to adjust the display brightness. Locate the HÄMARDAJA KÕRGE/MADALANE button on the top panel. Press this button to toggle between high and low brightness settings to suit your environment and preference.
Figure 4: Illustration of the High & Low Display Dimmer Control.
Hooldus
- Puhastamine: To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Patarei vahetus: The CR2032 backup battery is designed for long-term use. If the clock loses time during a power outage after several years, it may be time to replace the battery. This is located in a screw-secured compartment at the bottom of the clock.
- Paigutus: Place the clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Clock does not display time after plugging in. | Not connected to power, or power outlet is not active. | Veenduge, et toitejuhe on kindlalt töötavasse pistikupessa ühendatud. |
| Aeg on vale. | Incorrect time zone selected, or DST switch is set incorrectly. | Verify the time zone switch at the bottom of the clock is set to your local zone. Check the DST switch position. |
| Äratus ei helise. | Äratus ei ole aktiveeritud või äratuse helitugevus on liiga madal (kui seda saab reguleerida). | Ensure the alarm is turned ON using the ALARM ON/OFF button. Check for an alarm indicator light. |
| Ekraan on liiga hele või liiga tuhm. | Dimmeri seadistust on vaja reguleerida. | Heleduse sätete vahel vahetamiseks vajutage nuppu DIMMER HI/LO. |
| Kell kaotab voolukatkestuse ajal aegatage. | Backup battery is depleted. | Replace the CR2032 backup battery located in the compartment at the bottom of the clock. |
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Kaubamärk | Terav |
| Mudeli number | OZJONG |
| Värv | Black - Green Led |
| Kuva tüüp | Digitaalne |
| Eriomadused | Alarm, Daylight Saving, Auto Dimmable |
| Toote mõõtmed | 5.5 cm lai ja 2.6 cm kõrge |
| Toiteallikas | Juhtmega elekter, akutoitega |
| Varu aku | CR2032 (eelinstallitud) |
| Materjal | Plastikust |
| Kauba kaal | 9.9 untsi |
| Paigaldustüüp | Lauaplaat |
| UPC | 049353006079 |
Joonis 5: Toote mõõtmed hõlpsaks vaatamiseks.
Garantii ja tugi
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Sharp websaidile. Hoidke ostutšekk alles garantiinõuete esitamiseks.
