1. Sissejuhatus
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Mis on karbis
Palun kontrollige paki sisu, et kõik esemed oleksid olemas:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x 44-nupuga infrapunapult
- 1 x 24V Power Adapter (US Plug)
3. Ohutusalane teave
Read all safety instructions before installation and use. Keep this manual for future reference.
- Ainult siseruumides kasutamiseks: This product is designed for indoor use and is not waterproof.
- Toiteallikas: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Paigalduspind: Optimaalse liimimistulemuse tagamiseks veenduge, et paigalduspind on puhas, kuiv ja sile.
- Riba lõikamine: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Vältige ülekuumenemist: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Lapsed ja lemmikloomad: Hoidke toodet ja selle osi lastele ja lemmikloomadele kättesaamatus kohas.
4. Seadistamine ja paigaldamine
Õigeks paigaldamiseks järgige neid samme:
- Valmistage pind ette: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Mõõtke ja lõigake (vajadusel): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Kinnitage riba: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Ühendage toide: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Aktiveeri kaugjuhtimine: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Kasutusjuhised
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Kaugjuhtimispuldi funktsioonid:
- Sees/väljas: Toitenupp tulede sisse- või väljalülitamiseks.
- Heleduse reguleerimine: Kasutage ↑ ja ↓ buttons to increase or decrease brightness.
- Värvivalik: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- Isetegemise värvid: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Vajutage a DIY nuppu.
- Kasutage ↑ ja ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Vajutage sama DIY button again to save your custom color.
- Režiimi valik: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- SÄRK: Jumps between colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- AUTOMAATNE: Liigub läbi kõigi režiimide.
- KIIRE/AEGlane: Reguleerib dünaamiliste režiimide kiirust.
Figure 6: Remote control in use for ambient lighting.
6. Hooldus
Proper maintenance ensures the longevity of your LED strip lights.
- Puhastamine: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Hoiustamine: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Vältige paindumist: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7. Veaotsing
Probleemide korral vaadake järgmisi levinud probleeme ja lahendusi.
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Tuled ei lülitu sisse. |
|
|
| Kaugjuhtimispult ei reageeri. |
|
|
| Värvid on valed või ebajärjekindlad. |
|
|
8. Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Kaubamärk | Lepro |
| Mudeli number | PR410116-RGB-US |
| Valgusallika tüüp | LED (5050 SMD) |
| Hele Värv | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Pikkus | 39.4 jalga (12 m) |
| Voltage | 24 Volts (Power Adapter) |
| Wattage | 18 vatti (maksimaalselt ühilduv) |
| Kontrollimeetod | 44-Key IR Remote Control |
| Erifunktsioon | Color Changing, Dimmable, 8 Dynamic Modes |
| Kasutamine siseruumides/välistingimustes | Ainult siseruumides |
| Materjal | Vask, plast |
| Kauba kaal | 9.6 untsi |
| Värviedastusindeks (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Garantii ja tugi
Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro websaidile.
Kontaktandmed:
- Websait: www.lepro.com (Palun kontrollige ametlikku websaidilt kõige ajakohasema kontaktteabe.)
- E-post: Vaadake toote pakendilt või websaidile.
