LEXON LL128N Fingerprint Padlock User Manual

1. Üleview

This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.

2. Toote omadused

• Biomeetriline sõrmejälje tuvastamine: Securely unlock with your fingerprint. Supports up to 10 registered users.
• Vastupidav konstruktsioon: Made from stainless steel and zinc alloy for enhanced security.
• Ilmastikukindel: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
• Kauakestev aku: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
• USB-C laadimine: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
• Elegantne disain: Designed by Guillaume Delvigne, available in multiple colors.

Image: The LEXON Nomaday Lock showcasinselle disaini ja saadaolevate värvide põhjal.

3. Pakendi sisu

• LEXON LL128N Fingerprint Padlock
• USB-C laadimiskaabel
• Kasutusjuhend

4. Seadistamine

4.1 Initial Fingerprint Registration (Administrator)

Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.

1. Press and hold your finger on the fingerprint sensor until the sinine valgus illuminates. Release your finger.
2. The roheline tuli will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
3. Samal ajal kui roheline tuli is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.

After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.

4.2 Registering Additional Fingerprints (Users 3-10)

To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.

1. Vajutage ja hoidke all an administraatori sõrm on the sensor until the sinine valgus illuminates. Release the finger.
2. The roheline tuli will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.

Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.

4.3 Deleting All Fingerprints (Factory Reset)

To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:

1. Place an administraatori sõrm on the sensor and hold it. The sinine valgus will illuminate, then turn punane. Continue holding.
2. After the red light illuminates, the roheline tuli will flash once. Release your finger immediately after the green light flashes.

All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.

5. Kasutusjuhised

5.1 Unlocking the Padlock

To unlock the padlock, simply place a registered finger on the fingerprint sensor. The padlock will unlock within 0.5 seconds if the fingerprint is recognized.

Image: A hand demonstrating the unlocking process by placing a finger on the sensor.

5.2 Locking the Padlock

To lock the padlock, simply push the shackle down until it clicks into place. The padlock will automatically lock.

6. Charging the Padlock

The LEXON LL128N Padlock is equipped with a rechargeable Lithium-ion battery. When the battery is low, the indicator light will flash red. To charge:

1. Locate the USB-C charging port, usually covered by a protective cap.
2. Connect the provided USB-C cable to the padlock and to a standard USB power source (e.g., computer, wall adapter).
3. Märgutuli näitab laadimise olekut (nt punane laadimise korral, roheline täielikult laetud olekus).

A full charge takes approximately 1.5 hours and provides power for up to 3000 unlocks or 12 months of standby time.

7. Hooldus

• Puhastamine: Wipe the padlock with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Sõrmejäljeandur: Optimaalse jõudluse tagamiseks hoidke sõrmejäljesensorit puhta ja kuivana.
• Laadimisport: Ensure the USB-C charging port is free from dust and debris. Keep the protective cap closed when not charging.
• Hoiustamine: Store the padlock in a cool, dry place when not in use for extended periods.

Image: The padlock demonstrating its IP65 waterproof capabilities, suitable for various environments.

8. Veaotsing

9. Tehnilised andmed

Image: A visual representation of the product's technical specifications.

10. Garantii ja tugi

The LEXON LL128N Fingerprint Padlock comes with a 1-aastane tootjagarantii alates ostukuupäevast. See garantii katab tavakasutusel esinevad materjali- ja tootmisdefektid.

For warranty claims or technical support, please contact your retailer or visit the official LEXON webklienditeeninduse teabe sait.