TASMOR 10M USB RGB LED Strip Light User Manual
Model: JYX-5050x18N
Kaubamärk: Tasmor
Sissejuhatus
Thank you for choosing the TASMOR 10M USB RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor settings, including bedrooms, living rooms, kitchens, and for special occasions like parties and holidays. This manual provides essential information for safe installation, operation, and maintenance of your LED strip light.
Ohutusteave
- See toode on mõeldud ainult siseruumides kasutamiseksÄrge jätke vee ega kõrge õhuniiskuse kätte.
- Ensure the installation surface is clean, dry, and smooth for proper adhesion.
- Do not connect the LED strip to power while it is still rolled up, as this may cause overheating.
- Kasutage ainult kaasasolevat toiteadapterit ja komponente.
- Ärge proovige toodet parandada ega muuta. Teeninduse saamiseks pöörduge kvalifitseeritud personali poole.
- Hoida lastele kättesaamatus kohas.
- The LED strip can be cut at designated marks (every 4 poles, 10mm wide). Ensure power is disconnected before cutting.
Toode läbiview
The TASMOR 10M USB RGB LED Strip Light system includes the following components:
- 10-meter RGB LED Strip Light
- 44-key IR Remote Control
- In-line Control Box with USB power cable
- Kasutusjuhend
- Cleaning Wipes (may be included)
- Adhesive clips/mounts (may be included)
Seadistamine ja installimine
- Valmistage pind ette: Choose a clean, dry, and smooth surface for installation. Wipe the surface with the provided cleaning wipes (if applicable) and allow it to dry completely.
- Unroll the LED Strip: Fully unroll the LED strip before connecting it to power to prevent overheating.
- Ühenda komponendid:
- Connect the LED strip to the in-line control box. Ensure the arrows on the connectors align.
- Connect the USB plug from the in-line control box to a 5V USB power source (e.g., USB wall adapter, power bank, computer USB port).
Figure 3: Connection Diagram. This diagram illustrates the correct way to connect the LED strip to its controller and power source. - Kinnitage riba: Peel off the self-adhesive backing from the LED strip gradually as you press it firmly onto the prepared surface.
Figure 4: Installation Features. This image demonstrates the strong 3M adhesive, the ability to cut the strip at marked intervals, and its flexibility for bending around corners. - Riba lõikamine (valikuline): If the strip is too long, you can cut it at the designated cutting marks (indicated by copper pads and a scissor icon) every 4 poles. Ensure power is disconnected before cutting.
Kasutusjuhised
Your TASMOR LED Strip Light offers three convenient control methods:
1. In-line Control Box
The small button on the in-line control box allows for basic control:
- Press once to turn ON/OFF.
- Press repeatedly to cycle through basic colors and dynamic modes.
2. 44-Key IR Remote Control
The remote control provides comprehensive access to various functions:
- Toitenupp: Lülita SISSE/VÄLJA.
- Heleduse reguleerimine: Suurenda või vähenda valguse intensiivsust.
- Staatilised värvid: 20 preset static colors.
- DIY Buttons: Customize and save your own colors.
- Dünaamilised režiimid: 6 dynamic modes (e.g., Flash, Strobe, Fade, Smooth).
- Muusikarežiimid: 4 music modes that react to sound.
3. MagicStrip APP (Bluetooth Control)
For advanced features and customization, download the "MagicStrip" app from the App Store or Google Play. Ensure Bluetooth is enabled on your smartphone.
- Värvipalett: Access to 16 million colors for precise selection.
- Brightness & Saturation: Fine-tune light intensity and color vibrancy.
- DIY režiimid: Create and save custom lighting effects.
- Muusika sünkroonimisrežiim: The lights change color and speed in sync with music played through your phone's microphone. Adjust sensitivity and mode.
- Taimeri funktsioon: Schedule the lights to turn ON/OFF at specific times.
- Dünaamilised stseenid: Explore over 30 pre-programmed dynamic scenes and modes.
Hooldus
- Puhastamine: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Adhesioon: If the strip begins to peel, reinforce it with additional adhesive clips or double-sided tape.
- Hoiustamine: When not in use for extended periods, disconnect from power and store the strip in a cool, dry place.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Tuled ei lülitu sisse. | Toide puudub, ühendus on lahti, puldi patarei on tühi. | Check USB power source. Ensure all connections are secure. Replace remote battery (2 x A batteries required for remote, not included). |
| Kaugjuhtimispult ei tööta. | Remote battery dead, IR sensor blocked, remote too far. | Replace remote battery. Ensure no obstructions between remote and IR receiver on the control box. Operate within 5-8 meters of the receiver. |
| APP cannot connect to the strip. | Bluetooth pole lubatud, rakendus pole seotud, häire. | Ensure Bluetooth is enabled on your phone. Restart the app and the LED strip (unplug/replug USB). Try pairing again. |
| Tuled on tuhmid või vilguvad. | Insufficient power, damaged strip. | Ensure USB power source provides sufficient current (e.g., 5V/2A). If a section is damaged, it may need replacement. |
| Värvid on valed. | Incorrect connection, app/remote setting. | Check that the arrows on the connectors are aligned. Reset the strip by unplugging and replugging. Try different color settings on the remote or app. |
Tehnilised andmed
| Kaubamärk | Tasmor |
| Tootja | Tasmor |
| Mudeli number | JYX-5050x18N |
| Toote mõõtmed (P x L x K) | 1000 x 10 x 0.1 cm (10 meters) |
| Kauba kaal | 240 grammi |
| Värv | USB-10m (RGB) |
| Materjal | Plastikust |
| Pirnide arv | 180 |
| Kaasatud komponendid | 10m RGB LED Strip Light, 44-key Remote Control, 1-button Control Box and App for control |
| Voltage | 5 volti |
| Konkreetsed kasutusalad | Ainult siseruumides kasutamiseks |
| Eriomadused | Non-waterproof, No adapter included (USB powered) |
| Pistiku tüüp | Electrical Cable (USB) |
| Aku(d) kaasas | Ei |
| Vajalik(ad) aku(d) | Yes (2 x A for remote control) |
| Pirni tüüp | LED |
| Valgusvoog | 150 lm |
| Võimsus | 60 vatti |
| IP reiting | IP20 |
Garantii ja tugi
For warranty information and technical support, please refer to the seller's policy on the purchase platform or contact the manufacturer directly. Please retain your proof of purchase for any warranty claims.
Manufacturer: Tasmor
