Murata 376 SR626W hõbeoksiidist kellapatarei kasutusjuhend

1. Sissejuhatus

This manual provides essential information for the safe and effective use of Murata 376 SR626W 1.55V Silver Oxide Watch Button Cell batteries. These batteries are designed for watches and other small electronic devices requiring a stable and reliable power source. Murata, a leader in micro-battery technology, ensures high performance and reliability in its products.

Figure 1: Murata 376 SR626W Silver Oxide Watch Batteries in a blister pack, showing five individual cells.

2. Ohutusalane teave

Please read and understand all safety precautions before handling or installing batteries. Failure to follow these instructions may result in fire, explosion, leakage, or other hazards.

• Hoida lastele kättesaamatus kohas: Button cell batteries can be swallowed. If swallowed, seek immediate medical attention.
• Ärge laadige: These batteries are not rechargeable. Attempting to recharge may cause leakage or explosion.
• Ärge võtke lahti ega muutke: Tampering with batteries can lead to internal short circuits, leakage, or explosion.
• Do not expose to heat: Avoid direct sunlight, high temperatures, or fire. This can cause leakage, explosion, or fire.
• Ärge lühistage: Keep batteries away from metal objects that could cause a short circuit.
• Jälgige polaarsust: Always insert batteries with the correct positive (+) and negative (-) orientation as indicated by the device.
• Vältida kokkupuudet naha ja silmadega: If battery fluid comes into contact with skin or eyes, immediately flush with plenty of water and seek medical attention.

3. Paigaldamine

Installing a watch battery typically requires specific tools and careful handling. If you are unsure, it is recommended to consult a professional watch repair technician.

1. Valmistage ette oma tööruum: Work on a clean, well-lit surface. Use a soft cloth or mat to prevent scratching your watch.
2. Open the watch case: Depending on your watch model, this may involve unscrewing a case back, prying it open with a case knife, or using a specialized tool.
3. Eemaldage vana aku: Carefully note the orientation of the old battery. Use non-metallic tweezers or a small screwdriver to gently lift and remove it. Avoid touching the watch movement with bare hands.
4. Sisestage uus aku: Place the Murata SR626W battery into the battery compartment, ensuring the correct polarity (usually positive side up). Use non-metallic tweezers to avoid scratching the battery or watch components.
5. Kinnitage aku: Ensure the battery is seated correctly and any retaining clips are re-engaged.
6. Close the watch case: Carefully re-attach the watch case back, ensuring a secure fit to maintain water resistance (if applicable).

Figure 2: Illustration of a watch battery being carefully installed into a watch movement using tweezers.

4. Kasutusinfo

Murata SR626W batteries are designed for consistent and reliable power delivery in watches. They are silver oxide batteries, known for their stable voltage output and long shelf life.

• Voltage Stabiilsus: Silver oxide batteries maintain a stable voltage throughout their discharge cycle, which is crucial for accurate timekeeping in watches.
• Elavhõbedavaba: Murata batteries are manufactured without mercury, lead, or cadmium, reflecting a commitment to environmental responsibility.

Joonis 3: Lähivõte view of a Murata watch battery, highlighting the 'Hg 0%' marking, signifying its mercury-free composition.

5. Hooldus ja ladustamine

Proper handling and storage can extend the shelf life of your Murata batteries and ensure safety.

• Hoiustamine: Hoidke kasutamata akusid originaalpakendis jahedas ja kuivas kohas, eemal otsesest päikesevalgusest ja äärmuslikest temperatuuridest.
• Avoid mixing: Do not mix new and old batteries, or batteries of different types or brands.
• Puhtad kontaktid: Before installation, ensure the battery contacts in your device are clean and free of corrosion.

6. Veaotsing

If your device does not function after battery replacement, consider the following:

• Vale polaarsus: Double-check that the battery is inserted with the correct positive (+) and negative (-) orientation.
• Poor contact: Ensure the battery is seated firmly in its compartment and that the contacts are clean and making proper connection.
• Device issue: If the battery is correctly installed and the device still does not work, the issue may lie with the device itself, not the battery.
• Battery expiration: Kontrollige aku pakendil olevat aegumiskuupäeva.

7. Tehnilised andmed

Figure 4: A visual representation of various Murata watch battery models, including the SR626W, alongside a watch movement.

8. Utiliseerimine

Do not dispose of batteries in household waste. Batteries contain materials that can be harmful to the environment if not disposed of properly. Please recycle batteries at designated collection points or return them to appropriate recycling facilities. Consult your local regulations for proper battery disposal.

9. Garantii ja tugi

Murata batteries are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Murata webveebisaidilt või võtke ühendust edasimüüjaga. Hoidke ostutšekk ostutõendina alles.

Figure 5: A Murata SR626SW battery shown within a watch movement, illustrating its role as a reliable power source.