WORKPRO 20V akuga nurklihvija kasutusjuhend

1. Sissejuhatus

Thank you for choosing the WORKPRO 20V Cordless Angle Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

This powerful and versatile tool is designed for various tasks including grinding, derusting, cutting, and polishing, offering cordless convenience and high performance.

2. Ohutusjuhised

Elektriliste tööriistade kasutamisel järgige alati põhilisi ohutusnõudeid, et vähendada tulekahju, elektrilöögi ja kehavigastuste ohtu.

Üldised elektritööriistade ohutuse hoiatused:

• Tööpiirkonna ohutus: Hoidke tööala puhas ja hästi valgustatud. Ärge kasutage elektritööriistu plahvatusohtlikus keskkonnas, näiteks tuleohtlike vedelike, gaaside või tolmu juuresolekul.
• Elektriohutus: Vältige kehalist kokkupuudet maandatud pindadega. Ärge jätke elektritööriistu vihma ega märgade tingimuste kätte.
• Isiklik ohutus: Stay alert, watch what you are doing and use common sense. Always wear eye protection and hearing protection. Use appropriate personal protective equipment (PPE) such as dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions.
• Elektritööriistade kasutamine ja hooldus: Ärge kasutage elektritööriista jõuga. Kasutage oma töö jaoks õiget elektritööriista. Enne mis tahes reguleerimiste tegemist, tarvikute vahetamist või elektritööriistade hoiulepanekut eemaldage aku elektritööriistast.
• Akutööriista kasutamine ja hooldus: Laadige akut ainult tootja poolt ettenähtud laadijaga. Kasutage elektrilisi tööriistu ainult spetsiaalselt selleks ettenähtud akupakkidega.

Specific Angle Grinder Safety Warnings:

• See elektritööriist on ette nähtud kasutamiseks veski, lihvija, traatharja või lõiketööriistana. Lugege läbi kõik selle elektritööriistaga kaasasolevad ohutushoiatused, juhised, illustratsioonid ja spetsifikatsioonid.
• Ärge kasutage tarvikuid, mis pole tööriista tootja poolt spetsiaalselt välja töötatud ja soovitatud.
• Ensure the accessory is correctly mounted and tightened before use.
• Always use the correct protective guard for the type of work being performed (grinding or cutting).
• Do not operate the tool without the guard properly installed.
• Maintain a firm grip on the power tool with both hands.
• Hoidke käed pöörlevast tarvikust eemal.
• Olge ettevaatlik tagasilöögi suhtes, mis on äkiline reaktsioon kinnikiilunud või kinni kiilunud pöörlevale lõikekettale.
• Do not apply excessive pressure during cutting, as this can activate the protection and stop the machine. If this occurs, turn off the switch and restart immediately.

3. Pakendi sisu

Carefully unpack all items and ensure you have received all components listed below. If any items are missing or damaged, please contact WORKPRO customer service.

• 1 x WORKPRO Cordless Angle Grinder
• 1 x 20V 4.0 Ah Lithium-ion Battery
• 1 x kiirlaadija
• 5 x Cutting Discs (Ø125mm)
• 2 x Protective Guards (for cutting and grinding)
• 1 x Multi-position Auxiliary Handle
• 1 x mutrivõti

Image 3.1: The WORKPRO 20V Cordless Angle Grinder along with its complete set of accessories, including the battery, charger, cutting discs, protective guards, auxiliary handle, and wrench.

4. Toote lõppview

Familiarize yourself with the different parts of your WORKPRO Angle Grinder before operation.

Image 4.1: Detailed diagram showing the key components of the angle grinder, including the rubber auxiliary handle, safety lock, spindle lock, metal safety wheel guard for grinding, battery, LED indicator, and the quick-change guard mechanism.

1. Rubber Auxiliary Handle: Annab täiendava haarduvuse ja kontrolli.
2. Turvalukk: Hoiab ära juhusliku käivitumise.
3. Spindli lukk: Kasutatakse spindli lukustamiseks ketta hõlpsaks vahetamiseks.
4. Metal Safety Wheel Guard (for Grinding): Protects the user during grinding operations.
5. Aku: 20V 4.0Ah Lithium-ion battery for cordless operation.
6. LED indikaator: Näitab aku laetuse taset.
7. Change The Guard Without Tool: Quick-release mechanism for changing protective guards.
8. Metal Safety Wheel Guard (for Cutting): Protects the user during cutting operations.
9. Cut-Off Wheels: Discs for cutting various materials.
10. Laadija: Fast charger for the 20V battery.
11. Mutrivõtmed: Wrench for securing and removing discs.

5. Seadistamine

5.1 Aku laadimine

• Insert the 20V 4.0Ah Lithium-ion battery into the fast charger.
• Plug the charger into a standard electrical outlet (Type C - Two round pins, French type).
• The LED indicator on the battery will show the charging status. Ensure the battery is fully charged before first use.

5.2 Lisakäepideme kinnitamine

• The auxiliary handle can be attached in multiple positions (left, right, or top) for optimal comfort and control.
• Screw the rubber auxiliary handle firmly into the desired threaded hole on the grinder head.

Image 5.1: Illustration of the 3-position anti-vibration and non-slip rubber handle, demonstrating its adjustability for user comfort and control.

5.3 Installing/Changing Discs and Protective Guards

• Always ensure the battery is removed before changing discs or guards.
• Spindli pöörlemise vältimiseks vajutage ja hoidke spindli lukustusnuppu all.
• Use the provided wrench to loosen the flange nut and remove the old disc (if any).
• Place the desired cutting or grinding disc onto the spindle, ensuring it is centered.
• Replace the flange nut and tighten it securely with the wrench while holding the spindle lock.
• Select the appropriate protective guard for your task (cutting or grinding). The guards feature a quick-change mechanism.
• Attach the guard by aligning it with the grinder head and snapping it into place. Ensure it is securely fastened and does not tilt.

Image 5.2: The angle grinder shown with the included 5 metal/stainless cut-off wheels and 2 quick-change protective guards, one for cut-off wheels and one for flap discs.

6. Kasutusjuhised

6.1 Sisse-/väljalülitamine

• Sisestage laetud aku akupessa, kuni see oma kohale klõpsatab.
• To start the grinder, locate the switch in the middle-top position. Push the switch to the right, then push it upwards. This two-step operation is a safety feature to prevent accidental startup.
• To turn off the grinder, simply release the switch.

Pilt 6.1: Lähivõte view of the angle grinder's middle switch, highlighting the two-step operation (1. push right, 2. push up) for enhanced safety and the cruise speed function.

6.2 Lihvimis- ja lõiketehnikad

• Hold the grinder firmly with both hands, using the auxiliary handle for stability.
• Allow the disc to reach full speed (7500 rpm) before contacting the workpiece.
• For grinding, apply light, even pressure and move the grinder smoothly across the surface.
• For cutting, make shallow passes, gradually increasing the depth. Do not force the tool.
• If the machine stops due to excessive pressure, immediately turn off the switch, remove the pressure, and restart the machine.
• Always direct sparks away from yourself and others, and away from flammable materials.

Image 6.2: A collage demonstrating the angle grinder in action for different applications, including grinding metal, cutting pipes, and surface preparation, with sparks visible during operation.

7. Hooldus

7.1 Puhastamine

• After each use, disconnect the battery and clean the tool with a soft, dry cloth.
• Eemaldage ventilatsiooniavadest tolm ja praht, et vältida ülekuumenemist.
• Ärge kasutage vett ega keemilisi puhastusvahendeid.

7.2 Aku hooldus

• Hoidke akut jahedas ja kuivas kohas, eemal otsesest päikesevalgusest ja äärmuslikest temperatuuridest.
• Do not store the battery in a discharged state for extended periods. Recharge it periodically if not in use.
• Ärge jätke akut vee ega tule kätte.

7.3 Ketta vahetamine

• Replace discs when they become worn, damaged, or lose their effectiveness.
• Always use discs with the correct diameter (Ø125mm) and bore size for this grinder.
• Follow the instructions in Section 5.3 for safe disc replacement.

8. Veaotsing

This section addresses common issues you might encounter with your WORKPRO Angle Grinder.

9. Tehnilised andmed

Detailed technical specifications for the WORKPRO 20V Cordless Angle Grinder.

Image 9.1: The angle grinder placed on a scale, illustrating its lightweight design at only 1.75 kg without the battery, which helps reduce user fatigue during prolonged work.

10. Garantii ja tugi

The WORKPRO 20V Cordless Angle Grinder comes with a 1-aastane tootjagarantii alates ostukuupäevast.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, neglect, unauthorized repairs, or normal wear and tear.

For warranty claims, technical support, or inquiries about spare parts, please contact WORKPRO customer service through your original point of purchase or visit the official WORKPRO websaidile.

Palun hoidke oma ostutõend garantii kehtivuse tagamiseks alles.