GOWIN PRELUDE

GOWIN Prelude kaasaskantava Bluetooth-kõlari kasutusjuhend

Model: PRELUDE

Sissejuhatus

Welcome to the user manual for your GOWIN Prelude Portable Bluetooth Speaker. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your speaker to ensure optimal performance.

The GOWIN Prelude is a versatile and compact portable speaker designed for music enthusiasts on the go. It features Bluetooth connectivity for wireless audio streaming, an integrated FM radio, and a hands-free microphone for calls. Its rechargeable battery ensures hours of uninterrupted playback.

GOWIN Prelude Portable Bluetooth Speaker, front view

Joonis 1: Esiosa view of the GOWIN Prelude Portable Bluetooth Speaker.

Pakendi sisu

Palun märkige järgmiste üksuste ruut:

Toode läbiview

Juhtnupud ja pordid

Familiarize yourself with the speaker's buttons and ports for easy operation.

Üles view of GOWIN Prelude speaker showing control buttons

Figure 2: Top panel with control buttons (Power, Mode, Volume/Track).

Külg view of GOWIN Prelude speaker showing USB, AUX, and Micro SD ports

Figure 3: Side panel with various input ports (USB, AUX, Micro SD, Micro USB charging).

Seadistamine

Kõlari laadimine

Enne esmakordset kasutamist laadige kõlar täielikult.

  1. Connect the supplied Micro USB charging cable to the Micro USB port on the speaker.
  2. Connect the other end of the cable to a USB power adapter (e.g., phone charger, computer USB port) or a power bank.
  3. The charging indicator light will illuminate (color may vary, typically red) during charging and turn off or change color when fully charged.
  4. Täislaadimine võtab aega umbes 2-3 tundi.

Märkus. The speaker has a built-in Lithium Ion battery. Do not attempt to replace it.

Kasutusjuhised

Toide sisse/välja

Bluetooth-režiim

The speaker will automatically enter Bluetooth pairing mode when powered on for the first time or if no other mode is selected.

  1. Ensure the speaker is powered on and in Bluetooth mode (indicated by a flashing blue LED or audible prompt). If not, short press the Režiim (M) nuppu Bluetooth-režiimi lülitumiseks.
  2. Lubage oma nutitelefonis või Bluetooth-toega seadmes Bluetooth ja otsige saadaolevaid seadmeid.
  3. Select "GOWIN Prelude" from the list of devices.
  4. Once paired, the speaker will confirm with an audible prompt, and the LED indicator will stop flashing.
  5. Nüüd saate oma seadmest pärit heli kõlari kaudu esitada.

Näpunäide: Kõlar loob automaatselt uuesti ühenduse viimase seotud seadmega, kui see on leviala piires ja Bluetooth on lubatud.

Käed-vabad helistamine

Bluetoothi ​​kaudu ühenduse loomisel võimaldab kõlari sisseehitatud mikrofon käed-vabad kõnesid.

FM-raadio režiim

  1. Vajutage lühidalt nuppu Režiim (M) nuppu, et lülituda FM-raadio režiimile.
  2. Saadaval olevate jaamade automaatseks skannimiseks ja salvestamiseks vajutage pikalt Esita/Paus nuppu. Kõlar otsib ja salvestab jaamad automaatselt.
  3. Vajutage lühidalt nuppu Previous (-) or Next (+) nupud salvestatud jaamade vahel vahetamiseks.

AUX-režiim

For devices without Bluetooth, use the AUX input.

  1. Connect a 3.5mm audio cable (not included) from your audio device's headphone jack to the AUX port on the speaker.
  2. Vajutage lühidalt nuppu Režiim (M) nuppu, et lülituda AUX-režiimi.
  3. Audio playback will be controlled directly from your connected device.

USB Drive / Micro SD Card Playback

The speaker supports audio playback from USB drives and Micro SD cards.

  1. Insert a USB drive into the USB port or a Micro SD card into the TF card slot.
  2. Kõlar lülitub automaatselt vastavale režiimile ja hakkab heli esitama. files. If not, short press the Režiim (M) nuppu, et valida õige režiim.
  3. Kasutage Previous (-) ja Next (+) nuppe radade navigeerimiseks.

Helitugevuse juhtimine

Hooldus

Veaotsing

ProbleemLahendus
Kõlar ei lülitu sisse.Ensure the battery is charged. Connect the speaker to a power source using the Micro USB cable and try again after a few minutes.
Bluetooth-seadmega ei saa siduda.Make sure the speaker is in Bluetooth pairing mode (flashing LED). Ensure Bluetooth is enabled on your device and it's within 10 meters (33 feet) of the speaker. Forget "GOWIN Prelude" from your device's Bluetooth list and try pairing again.
Heli puudub või on vaikne.Check the volume level on both the speaker and your connected device. Ensure the correct mode (Bluetooth, AUX, USB, TF) is selected. If using AUX, ensure the cable is fully inserted and not damaged.
FM-raadio vastuvõtt on halb.Try repositioning the speaker. In some cases, connecting the Micro USB charging cable (without power) can act as an antenna to improve reception.
Speaker freezes or becomes unresponsive.Try turning the speaker off and then on again. If it doesn't respond, let the battery drain completely and then recharge it.

Tehnilised andmed

Diagram showing GOWIN Prelude speaker dimensions and features

Figure 4: Key dimensions and features of the GOWIN Prelude speaker.

FunktsioonDetail
Mudeli nimiPrelüüd
KaubamärkGOWIN
ÜhenduvustehnoloogiaBluetooth, Auxiliary, USB, Micro SD
Kõlari tüüpSubwoofer
EriomadusedBluetooth, Hands-Free Calling, FM Radio
Soovitatav kasutamineMuusikamängijad
Ühilduvad seadmedNutitelefon
Subwooferi läbimõõt45 mm
Kõlari maksimaalne väljundvõimsus3 vatti
Takistus4 oomi
Heliväljundi režiimMono, stereo
MaterjalPlastikust
VärvMust
Aku tüüpLiitiumioonaku (vajalik 1, kaasas)
Aku tööigaKuni 4 tundi
Mõõdud (P x L x K)14.4 x 12 x 4.1 cm
Kaal220 g
VeekindelEi

Garantii ja tugi

The GOWIN Prelude Portable Bluetooth Speaker comes with a 1-aastane piiratud garantii from the date of purchase. This warranty covers manufacturing defects and workmanship.

Garantii ei hõlma:

For warranty claims or technical support, please contact GOWIN customer service through their official channels. Refer to the contact information provided on the product packaging or the official GOWIN websaidile.

Veebitugi: Visit the GOWIN Mexico store on Amazon for more information: GOWIN Mexico Store

Seotud dokumendid - EELELÜÜD

Preview Gowini komplekskordisti IP kasutusjuhend
Gowini komplekskordisti IP kasutusjuhend, mis kirjeldab selle funktsioone, portide kirjeldusi, ajastust, konfiguratsiooni ja etalondisaini. See IP on loodud kompleksarvude korrutamiseks.
Preview Gowin_EMPU(GW1NS-4C) IDE tarkvara: põhjalik arendusjuhend
See teatmik annab üksikasjalikke juhiseid Gowin_EMPU(GW1NS-4C) IDE tarkvara kasutamise kohta, sh seadistamise ja kasutamise kohta koos ARM Keil MDK ja GOWIN MCU Designeriga manussüsteemide arendamiseks.
Preview Gowini virtuaalse sisend-väljundtööriista kasutusjuhend
Gowin Virtual Input Output (GVIO) tööriista kasutusjuhend, mis on FPGA-de digitaalsignaali dünaamilise silumise tööriist. Hõlmab konfigureerimist, kasutamist ja ühist silumist GAO-ga.
Preview Gowin XCORR IP kasutusjuhend
Gowin XCORR IP kasutusjuhend, mis kirjeldab üksikasjalikult selle funktsioone, konfiguratsiooni ja kasutamist ristkorrelatsioonioperatsioonide jaoks FPGA-disainides. Hõlmab sisendparameetreid, portide kirjeldusi, ajastust ja ressursside kasutamist.
Preview Gowin Software Tcl käskude kasutusjuhend
See kasutusjuhend annab põhjaliku ülevaate Gowin Software'iga kasutatavatest Tcl-käskudest, kirjeldades üksikasjalikult käsurealiidese toiminguid tõhusa projektijuhtimise ja FPGA disainivoogude jaoks, sealhulgas käskude süntaksit, parameetreid ja näiteid.ampvähem.
Preview Gowin云源软件用户指南 – GOWIN
Gowini tarkvaraarenduse aruanne. See dokument annab põhjalikud juhised ja üksikasjad Gowin Yunyuani tarkvara kasutamise kohta, sealhulgas selle liidese, projektijuhtimise, integreeritud tööriistade ja väljundi kohta. files ja Tcl käske. See hõlmab versiooniteavet ja tugiteavet.