Intex PureSpa Plus Portable Inflatable Hot Tub Spa

Sissejuhatus

The Intex PureSpa Plus 28429E is a 4-person portable inflatable hot tub designed to provide relaxation and comfort. It features 140 high-performance bubble jets and a built-in heating system that can reach up to 104°F (40°C). This manual provides essential information for the safe and efficient setup, operation, and maintenance of your PureSpa Plus.

Oluline märkus: Due to California energy restrictions, this item is not available for sale or shipping to California.

Kaasatud komponendid

Enne seadistamise alustamist veenduge, et kõik komponendid on olemas:

• Täispuhutav mullivann
• Isoleeritud kate
• Heating / Filtration / Air Blower / Hard Water System Unit
• Värvi muutev LED valgus
• Two Filter Cartridges
• Two Headrests
• Thermal Ground Cloth
• Täitevoolik
• Kandekott
• Floating Chlorine Dispenser
• Testriba

Seadistusjuhised

Follow these steps to set up your Intex PureSpa Plus:

1. Valige asukoht: Select a flat, stable surface for your spa. Ensure it is capable of supporting the weight of the filled spa and occupants. Place the thermal ground cloth on the chosen surface.
2. Pakkige lahti ja voltige lahti: Carefully remove the spa tub and accessories from the carry bag. Unfold the spa tub on the thermal ground cloth.
3. Täitke spaa täis: Connect the inflation hose to the spa's inflation valve and the built-in inflation system on the control unit. Inflate the spa until it is firm but not over-inflated.
4. Ühendage juhtseade: Attach the heating/filtration/air blower/hard water system unit to the spa tub following the instructions in the detailed manual. Ensure all connections are secure.
5. Täida veega: Fill the spa with water using a garden hose. Do not exceed the maximum fill line.
6. Paigalda tarvikud: Place the two headrests on the spa rim as desired. Insert the filter cartridges into their housings.

Kasutusjuhised

The PureSpa Plus features an easy-to-use, tilt-adjustable control panel for managing its functions:

• Toitenupp: Turns the spa on or off.
• Temperatuuri reguleerimine: Use the up and down arrows to set your desired water temperature, up to 104°F (40°C).
• Bubble Jet Activation: Press the bubble jet button to activate the 140 high-performance bubble jets for a refreshing massage.
• Küttesüsteem: The heating system will automatically adjust to maintain the set temperature.
• Värvi muutev LED-tuli: Activate the integrated LED light to create a unique ambiance.

Hooldus

Proper maintenance is crucial for the longevity and hygiene of your PureSpa Plus:

• Filtrikassetid: Regularly check and clean the filter cartridges. Replace them as needed to ensure efficient filtration.
• Vee keemia: Use the provided test strips to monitor water chemistry (pH, chlorine/bromine levels). Adjust chemicals using the floating chlorine dispenser to maintain safe and clean water.
• Vee muutused: It is recommended to change the spa water every 1 to 3 months, depending on usage.
• Puhastamine: Periodically clean the interior and exterior of the spa.

Veaotsing

If you encounter issues with your Intex PureSpa Plus, refer to the following common problems and solutions:

• E95 veakood: This code typically indicates an issue with the heating system, often related to water temperature. Consult the full manual for specific diagnostic steps.
• Insufficient Bubbles: Check that the air blower is properly connected and that the air jets are not obstructed.
• Vesi ei soojenda: Ensure the heating function is activated on the control panel and that the filter cartridges are clean. Verify power supply.

Tehnilised andmed

Ametlikud tootevideod

Garantii ja tugi

For warranty information, product support, or to purchase replacement parts, please refer to the official Intex website or contact Intex customer service directly. Keep your purchase receipt and model number handy for all inquiries.