Sissejuhatus
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Ohutusteave
Paigaldamise ja kasutamise ajal järgige alati järgmisi ohutusnõudeid:
- Kandevõime: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can result in serious injury or property damage.
- Seina struktuur: Veenduge, et kinnituspind (sein) suudab ohutult kanda kinnituse ja teleri kooskaalu.
- UL loetletud: This product is UL Listed, indicating it meets specific safety standards.
- Professionaalne abi: Kui te pole paigaldusprotsessi mis tahes osas kindel, pidage nõu kvalifitseeritud spetsialistiga.
- Lapsed: Hoidke lapsed paigaldamise ajal paigalduspiirkonnast eemal.
- Tööriistad: Use appropriate tools and follow all instructions for their safe operation.
Pakendi sisu
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Seinaplaadi kokkupanek
- Televiisori kronsteinid (2 tk)
- Various TV Screws (M4, M6, M8)
- Vahetükid ja seibid
- Lag Bolts and Concrete Anchors (for specific wall types)
- Mulli tase
- Mutrivõti
- Installimismall
Tehnilised andmed
| Mudeli number | 28XTu2564 |
| Kaubamärk | PAIGALDAMINE |
| Teleri suuruse ühilduvus | 26 kuni 65 tolli |
| Kaalu kandevõime | 88 naela (40 kg) |
| VESA ühilduvus | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Seinatüübi ühilduvus | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Kaldenurk | +5° / -13° |
| Pöördenurk | ±45° (Maximum swivel angle depends on TV size) |
| Taseme reguleerimine | ±3° (Post-installation) |
| Seina kaugus | 3" kuni 15.7" |
| Materjal | Legeerteras |
Seadistamine ja installimine
Paigalduseelsed kontrollid
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Kontrollige teleri VESA mustrit: Leidke teleri tagaküljel neli kinnitusava ja mõõtke nende vaheline horisontaalne ja vertikaalne kaugus. See kinnitus toetab VESA kinnitusi mõõtmetega 75x75 mm kuni 400x400 mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Kontrolli seina tüüpi: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Ärge paigaldage ainult kipsplaadile.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Paigaldamise etapid
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Joonis 3: Üleview of the 3-Step Easy Installation Process.
1. samm: kinnitage klambrid teleriga
- Asetage teler ettevaatlikult ekraaniga allapoole pehmele ja puhtale pinnale, et ekraani ei kahjustataks.
- Joondage teleri kronsteinid teleri tagaküljel asuvate kinnitusavadega.
- Valige riistvarakomplektist sobivad kruvid, seibid ja vahetükid, mis sobivad teie teleri kinnitusavadega.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
2. samm: kinnitage seinaplaat seina külge
- Determine the desired height and location for your TV.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- Tõstke abiga ettevaatlikult teler koos kinnitatud kronsteinidega üles ja kinnitage need seinaplaadi külge.
- Veenduge, et teler oleks seinaplaadile kindlalt kinnitatud.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Kasutusjuhised
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewnurgad.
Reguleerimine Viewing
- Kallutage: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewmugavust saades.
- Pööratav: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewing from different areas of the room.
- Laiendus: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Nivelleerimine: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Hooldus
Regulaarne hooldus aitab tagada teie teleri seinakinnituse pikaealisuse ja ohutu töö.
- Puhastamine: Wipe the mount with a soft, dry cloth to remove dust. Avoid using abrasive cleaners or solvents.
- Perioodilised kontrollid: Kontrollige regulaarselt kõiki kruvisid ja polte, et need oleksid kindlalt kinni. Vajadusel pingutage uuesti.
- Liikumine: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Veaotsing
If you encounter issues during or after installation, consider the following common solutions:
- Televiisor pole tasapinnal: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Mount tundub lõtv: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Kohandamise raskusaste: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Puuduvad osad: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Garantii ja tugi
MOUNTUP TV wall mount series are backed by a 3-aastane kaitseplaan. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual:
