Käsiraamatud+

Intelbras IVP2000SF

Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

Model: IVP2000SF

1. Sissejuhatus

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Ohutusalane teave

3. Pakendi sisu

Veenduge, et pakendis on kõik esemed olemas:

4. Toote lõppview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Intelbras IVP 2000 SF Wireless Passive Infrared Sensor

Joonis 1: Esiosa view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Põhikomponendid:

5. Seadistamine

5.1. Aku paigaldamine

  1. Open the sensor's front cover by gently prying it open from the bottom notch.
  2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
  3. Close the front cover, ensuring it clicks securely into place.

5.2. Anduri paigaldamine

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

  1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
  2. Kasutage kinnitusklambrit mallina kruvide asukohtade märkimiseks seinale.
  3. Puurige märgitud kohtadesse augud ja sisestage seinatüüblid.
  4. Kinnitage kinnitusklamber kaasasolevate kruvide abil seina külge.
  5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

  1. Putting your security system into "pairing" or "enrollment" mode.
  2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
  3. Confirming successful pairing through the system's interface or LED indicators.

6. Anduri kasutamine

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LED-indikaatori olek

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Hooldus

7.1. Puhastamine

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Aku vahetamine

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Regulaarsed kontrollid

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Veaotsing

ProbleemVõimalik põhjusLahendus
Andur ei tuvasta liikumist.
  • Tühi või tühi aku.
  • Incorrect mounting position.
  • Obstruction in detection path.
  • Sensor not paired correctly.
  • Vahetage aku.
  • Adjust mounting height/angle.
  • Eemaldage kõik takistused.
  • Re-pair the sensor with the security system.
Valehäired.
  • Direct sunlight or heat sources.
  • Air conditioning/heating vents.
  • Pets (if not pet-immune model).
  • Lahtine kinnitus.
  • Relocate sensor away from heat/sun.
  • Ensure stable mounting.
  • Consult system manual for pet immunity settings if applicable.
LED indicator flashing continuously.Aku tühi.Vahetage aku.
Sensor not communicating with the security system.
  • Ulatusest väljas.
  • Sekkumine.
  • Süsteem ei ole sidumisrežiimis.
  • Relocate sensor closer to the system.
  • Check for sources of wireless interference.
  • Ensure system is in pairing mode during enrollment.

9. Tehnilised andmed

10. Garantii teave

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webveebisaidilt või võtke ühendust nende klienditoega. Hoidke ostutõendit garantiinõuete esitamiseks.

11. Toetus

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels: