UltraPro 24-inch Hardwired Under Cabinet LED Light Fixture (Model 45368) Instruction Manual

1. Ohutusalane teave

Please read and understand all safety instructions before attempting to assemble, operate, or install this product. Failure to follow these instructions may result in electric shock, fire, or other injuries.

• HOIATUS: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation.
• Do not install the LED light fixture while it is plugged into an outlet.
• If you are not comfortable installing the fixture, contact a qualified electrician.
• Ensure your mounting location is dry and capable of supporting the fixture's weight.
• The mounting location must be within a suitable distance from the light fixture to reach the nearest power outlet.
• See kinnitus on mõeldud kasutamiseks ainult siseruumides.

2. Pakendi sisu

Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:

• LED Light Fixture (A)
• Light Mounting Screws (B)
• Strain Relief Assembly (C)

3. Vajalikud tööriistad

Paigaldamiseks on vaja järgmisi tööriistu (ei kuulu komplekti):

• 1/16 inch drill bit (for soft wood)
• 3/32 inch drill bit (for hard wood)
• Kruvikeeraja
• Tangid

4. Paigaldusjuhised

Follow these steps to properly install your UltraPro under cabinet light fixture:

1. Valmistage kinnitus: Remove the lens diffuser by lightly pulling the rear edge towards the front and upward. Remove the screws on the top of the cover. Firmly push forward on the bottom front of the housing to unlatch it from the catch points, revealing the hardware kit inside.
2. Mark Mounting Location: Hold the fixture base in place as a template and mark the locations for pilot holes on your mounting surface.
3. Prepare Knockouts: Choose a suitable knockout location from those provided on the fixture and remove them using your screwdriver.
4. Paigaldage tõmbetugevdaja: Remove the nut and lock washer from the strain relief assembly. Insert the threaded end of the strain relief into the chosen knockout. Secure it by tightening the nut and lock washer. Pliers may be used for additional tightening if needed.
5. Eelpuuritud augud: Use the appropriate drill bit (1/16 inch for soft wood, 3/32 inch for hard wood) to pre-drill holes in the spots you marked. Leave screw heads protruding about 1/8 inch beyond the surface.
6. Paigaldage kinnitusalus: Line up the screws with the keyhole tabs on the fixture base. Fasten the base by sliding the fixture into place and tightening the screws.
7. Ühendage juhtmestik: Install and secure the armored cable to meet local electrical codes. Carefully connect the hot AC supply wire to the hot wire of the fixture using the provided wire quick connects. Carefully connect the neutral AC supply wire to the neutral wire of the fixture using the provided wire quick connects. Carefully connect the ground AC supply wire to the ground of the fixture using the provided wire quick connects. Pull wires to check for tightness. If your electrical system contains no grounding wire, consult a qualified electrician before proceeding.
8. Paigaldage seade uuesti kokku: Ensure that no bare wires are exposed. Reattach the cover housing. Secure the screws and washers, double-checking that all connections are properly sealed inside the fixture.
9. Viimased sammud: Reinsert the lens diffuser. Restore power to your circuit breaker or fuse box.

Paigaldusvideo juhend

Video: Official UltraPro guide demonstrating the direct wire installation process for the LED light fixture, covering all steps from unboxing to final power restoration.

5. Operatsioon

The UltraPro LED light fixture offers versatile lighting options:

• Sisse/välja lüliti: Use the integrated rocker switch on the fixture to turn the light on or off.
• Värvitemperatuuri valik: The fixture features a 3-position switch to select between three color temperatures:
• 2700K (soe valge): Provides a soft, cozy ambiance.
• 4000K (külm valge): Offers a bright, neutral white light.
• 5000K (päevavalgus): Delivers a crisp, bright light ideal for task lighting.
• Hämardamise funktsioon: For dimming capabilities, use a compatible in-wall LED dimmer (sold separately).

6. Hooldus

To ensure optimal performance and longevity of your LED light fixture:

• Puhastamine: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED tehnoloogia: The long-life, energy-efficient LED technology eliminates the need for replacement bulbs.

7. Veaotsing

If you experience issues with your UltraPro LED light fixture, refer to the following common solutions:

• Valgus ei lülitu sisse:
• Kontrollige kaitselülitit või kaitsmekarpi, et veenduda seadme vooluvarustuses.
• Verify that the on/off switch on the fixture is in the 'ON' position.
• Ensure all wiring connections are secure and properly installed.
• Valgus väreleb või on hämar:
• If using a dimmer, ensure it is a compatible LED dimmer. Incompatible dimmers can cause flickering or poor performance.
• Kontrollige lahtiste juhtmete ühenduste olemasolu.
• Vale värvitemperatuur:
• Adjust the 3-position color temperature switch on the fixture to your desired setting (2700K, 4000K, or 5000K).

If problems persist, consult a qualified electrician or contact customer support.

8. Tehnilised andmed

9. Garantii ja tugi

Garantii: This UltraPro product is backed by a limited lifetime warranty. Please refer to the product packaging or manufacturer's webtäielike garantiitingimuste ja -teabe saamiseks külastage veebisaiti.

Klienditugi: For technical assistance, troubleshooting, or warranty claims, please contact UltraPro customer service. Contact information can typically be found on the product packaging or the official UltraPro websaidile.