EGLO 98187

Eglo 98187 Solar Wall Light Instruction Manual

Model: 98187 | Brand: EGLO

1. Sissejuhatus

Thank you for choosing the Eglo 98187 Solar Wall Light. This outdoor spotlight is designed to provide illumination in garden areas, patios, or entrances where electrical wiring is not readily available. Featuring an integrated motion sensor and an external solar panel, it offers convenience, security, and energy efficiency. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.

Eglo 98187 Solar Wall Light illuminating a wall at dusk, with its solar panel placed on a bush.

Figure 1: Eglo 98187 Solar Wall Light in an outdoor setting.

2. Ohutusjuhised

3. Pakendi sisu

Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:

4. Tehnilised andmed

KaubamärkEGLO
Mudeli number98187
MaterjalPlastikust
VärvMust
Toote mõõtmed (P x L x K)15.5 x 11 x 14.5 cm
Kauba kaal510 grammi
IP reitingIP44
ValgusallikasIntegreeritud LED
Valgusvoog150 luumenit
Võimsus2 vatti
Värvi temperatuur3000 kelvinit (soe valge)
Voltage1.2 volti
Aku3 AA (kaasas)
EriomadusedMotion Sensor, Water Resistant, Automatic On/Off
Diagram showing the dimensions of the Eglo 98187 solar wall light and its separate solar panel.

Joonis 2: Toote mõõtmed.

5. Seadistamine ja installimine

Follow these steps to install your Eglo 98187 Solar Wall Light:

  1. Valige asukoht: Select a wall or surface for the light unit and a separate location for the solar panel. The solar panel requires direct sunlight for at least 6 hours daily to fully charge the battery. Avoid shaded areas.
  2. Valgusüksuse paigaldamine:
    • Mark the drilling points on the wall using the light unit as a template.
    • Puurige augud ja sisestage kaasasolevad seinatüüblid.
    • Kinnitage valgusti kaasasolevate kruvide abil seinale.
    Close-up of the back of the Eglo 98187 light unit showing mounting holes, screws, and the AUTO/OFF/ON switch.

    Figure 3: Mounting points and switch on the light unit.

  3. Paigaldage päikesepaneel:
    • Position the solar panel in a location that receives maximum direct sunlight throughout the day.
    • Mark and drill holes, then secure the solar panel bracket using the provided screws.
    • Adjust the angle of the solar panel to optimize sun exposure.
    Külg view of the Eglo 98187 solar wall light showing the connection cable between the light unit and the separate solar panel.

    Figure 4: Solar panel and light unit connection.

  4. Ühendage päikesepaneel: Plug the cable from the solar panel into the input port on the light unit. Ensure the connection is secure.
  5. Esmane tasu: Allow the solar panel to charge the battery for at least 24-48 hours in direct sunlight before first use to ensure optimal performance.
Diagram illustrating the installation steps for the Eglo 98187 solar wall light, showing how to mount both the light and the solar panel, and connect them.

Figure 5: Installation diagram.

6. Kasutusjuhised

The Eglo 98187 Solar Wall Light features a multi-function switch and an integrated motion sensor.

  1. Lüliti seaded: Locate the switch on the back of the light unit (refer to Figure 3). It typically has three positions: AUTO, OFF, and ON.
    • AUTOMAATNE: This is the recommended setting. The light will automatically turn on at dusk when motion is detected within its range. It will turn off after a set period of no motion.
    • VÄLJAS: The light will remain off, regardless of motion or ambient light. Use this setting for storage or if you do not wish for the light to operate.
    • PEAL: The light will remain continuously on at night until the battery drains or dawn breaks. This setting is not recommended for daily use as it will deplete the battery quickly.
  2. Liikumisandur: The integrated motion sensor has a detection angle of 90 degrees and a range of up to 8 meters. Ensure the sensor is not obstructed for optimal performance.
  3. Automaatne töö: In AUTO mode, the light charges during the day via the solar panel. At night, it will activate when motion is detected, providing illumination for safety and convenience.
Esiosa view of the Eglo 98187 solar wall light, showing the LED array and the motion sensor below it.

Joonis 6: Esiosa view of the light unit with LED and motion sensor.

7. Hooldus

Regular maintenance ensures optimal performance and extends the lifespan of your solar wall light.

8. Veaotsing

If your Eglo 98187 Solar Wall Light is not functioning as expected, try the following solutions:

9. Garantii ja tugi

EGLO products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or visit the official EGLO website. If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact EGLO customer support or your retailer for assistance.

EGLO Contact Information:
Palun külastage www.eglo.com for regional contact details and support.