Beghelli 19432 LED Emergency Lamp Kasutusjuhend

Sissejuhatus

This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.

The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.

Ohutusteave

Always adhere to the following safety guidelines to prevent electric shock, fire, or injury:

• Enne paigaldamist või hooldust veenduge, et toide on lahti ühendatud.
• Paigalduse peaks teostama kvalifitseeritud elektrik vastavalt kohalikele elektrieeskirjadele.
• Ärge paljastage lamp liigse niiskuse või äärmuslike temperatuuride eest.
• Ärge proovige seadet avada ega muuta.amp housing, as this may void the warranty and pose a safety risk.
• Hoidke pakkematerjalid lastele kättesaamatus kohas.

Pakendi sisu

Veenduge, et kõik komponendid on olemas ja kahjustamata:

• Beghelli 19432 LED Emergency Lamp üksus
• Integrated Li-Fe Battery
• Kinnitustarvikud (kruvid, tüüblid)
• Kasutusjuhend (see dokument)

Seadistamine ja installimine

The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:

1. Valige asukoht: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
2. Valmistage ette paigalduspind: Ensure the wall surface is clean, dry, and capable of supporting the lampkaal.
3. Märkige puurimispunktid: Kasutage lamp's mounting holes as a template to mark the drilling points on the wall.
4. Puurida augud: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
5. Sisestage seinapistikud: Sisestage kaasasolevad seinapistikud puuritud aukudesse.
6. Paigaldage Lamp: Kinnitage lamp to the wall using the provided screws. Ensure it is firmly attached.
7. Ühendage toide: Ühendage lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
8. Esmane tasu: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.

Kasutusjuhised

The Beghelli 19432 operates automatically:

• Tavaline töö: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
• Hädaolukord: Voolukatkestuse korral lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
• Tagasi tavarežiimi: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
• Testinupp (kui on olemas): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)

Hooldus

Regular maintenance ensures the longevity and reliability of your emergency lamp:

• Puhastamine: Puhastage lampvälispind pehme ja kuiva lapiga. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
• Aku kontroll: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
• Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
• Patarei vahetus: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
• Lamp Asendamine: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.

Veaotsing

Levinud probleemide ja nende lahenduste kohta vaadake allolevat tabelit.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.

Tehnilised andmed

Garantii ja tugi

For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.

For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli webveebilehel või toote pakendil.

Taaskasutusteave: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.