Intermatic ET2815C Astro 365/7-päevase elektroonilise taimeri kasutusjuhend

1. Sissejuhatus

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intermatic ET2815C Astro 365/7-Day Electronic Timer. Please read this manual thoroughly before installation and use to ensure proper function and safety. This electronic timer is designed for precise control of electrical loads, offering advanced scheduling capabilities for various applications.

2. Ohutusalane teave

HOIATUS: Tulekahju või elektrilöögi oht

• Disconnect power at the circuit breaker(s) or disconnect switch(es) before installing or servicing this device.
• Seadme pinge väljalülitamiseks enne hooldust võib vaja minna rohkem kui ühte kaitselülitit või lahtiühendamislülitit.
• Paigaldamine ja/või juhtmestik peab olema kooskõlas riiklike ja kohalike elektriseadustiku nõuetega.
• Kasutage AINULT vaskjuhte.
• Do NOT remove the insulator covering the terminals.

Juhtmete ühendamise juhised: To wire, lift the terminal cover, remove the screw, and swing it aside. Replace the screw and the plastic insulator covering the terminal before powering on the device.

See pilt näitab esikülge view of the Intermatic ET2815C electronic timer. Visible elements include the digital display, control buttons such as MODE, DAY, ENTER/NEXT, ON/OFF, CLEAR MEM, and the CLEAR ENTRY buttons with plus and minus symbols. Below the main controls, safety warnings in English, French, and Spanish regarding electrical shock and fire hazards are printed, along with instructions for wiring and not removing the insulator. The model name 'Astro 365/7-Day' is prominently displayed at the top.

3. Toote lõppview

The Intermatic ET2815C is an advanced electronic timer designed for precise control over electrical circuits. It features a user-friendly interface and robust capabilities suitable for a wide range of applications.

Peamised omadused:

• Astro 365/7-Day Operation: Provides flexible scheduling options for every day of the week, year-round.
• 96 Set Points/Events: Allows for up to 96 distinct ON/OFF programming events.
• 50 Holiday Blocks: Independent scheduling for up to 50 holiday periods.
• 100-Hour Supercapacitor: Eliminates the need for batteries by providing backup power for settings during outages.
• 2-Hour Override Mode: An additional mode of operation that turns the ON/OFF buttons into a 2-hour override function.
• Voltage: Operates on 120 to 277Vac.
• Amptõus: Hinnatud 20 Amps.

Juhtnupud:

Refer to the product image in Section 2 for the location of these buttons:

• MODE: Cycles through different programming modes.
• PÄEV: Used to set the day of the week or select specific days for programming.
• SISESTA/JÄRGMINE: Confirms selections and moves to the next programming step.
• SISSE/VÄLJA: Manually controls the load or activates override mode.
• TÜHJENDA MÄLU: Clears all programmed events.
• TÜHJA SISSEMINE: Kustutab programmeerimise ajal praeguse kirje.
• + / - nupud: Adjust values (time, day, program number).

4. Paigaldamine

TÄHTIS: Before proceeding with installation, ensure all safety warnings in Section 2 are understood and followed. Disconnect all power to the circuit at the breaker or disconnect switch before beginning any wiring.

Paigaldamine:

1. Select a suitable location for mounting the timer, ensuring it is protected from moisture and extreme temperatures.
2. Mount the timer securely using appropriate fasteners.

Juhtmed:

All wiring must comply with national and local electrical codes. Use COPPER conductors ONLY.

1. Access the wiring terminals by lifting the terminal cover, removing the screw, and swinging it aside as indicated on the device.
2. Connect the incoming power supply wires (Line) and the load wires (to the device being controlled) to the appropriate terminals.
3. Veenduge, et kõik ühendused on tihedad ja kindlad.
4. Replace the screw and the plastic insulator covering the terminals before restoring power.
5. Restore power to the circuit at the breaker or disconnect switch.

5. Seadistamine

Initial Power-Up and Time Setting:

1. Upon initial power-up, the display may show a default time or be blank.
2. Vajutage nuppu REŽIIM nuppu, kuni kuvatakse aja seadistamise režiim.
3. Kasutage + ja - nupud tundide ja minutite reguleerimiseks.
4. Vajutage ENTER/NEXT kellaaja kinnitamiseks.
5. Kasutage PÄEV nupp ja + / - buttons to set the current day of the week.
6. Vajutage ENTER/NEXT päeva kinnitamiseks.
7. The timer is now set to the current time and day.

6. Kasutusjuhised

Programming ON/OFF Events:

The ET2815C allows for up to 96 ON/OFF events.

1. Vajutage nuppu REŽIIM button until 'PROG' or 'PROGRAM' appears on the display.
2. The display will show 'P1 ON' (Program 1 ON). Use + / - soovitud sisselülitusaja määramiseks.
3. Vajutage ENTER/NEXT.
4. Kasutage PÄEV button to select the days of the week for this ON event (e.g., Mon-Fri, Daily, or specific days).
5. Vajutage ENTER/NEXT.
6. The display will show 'P1 OFF'. Use + / - soovitud väljalülitusaja määramiseks.
7. Vajutage ENTER/NEXT.
8. Kasutage PÄEV button to select the days of the week for this OFF event.
9. Vajutage ENTER/NEXT to save Program 1 and move to 'P2 ON'.
10. Repeat steps for additional programs. To exit programming, press REŽIIM kuni kuvatakse praegune kellaaeg.

Holiday Block Programming:

The timer supports up to 50 holiday blocks with independent scheduling.

1. Consult the full product manual for detailed steps on setting holiday blocks, as this feature involves specific date ranges.

Manual Override and 2-Hour Override Mode:

• Käsitsi SISSE/VÄLJA: Vajutage nuppu SISSE/VÄLJA button to manually switch the load ON or OFF, overriding the current program until the next scheduled event.
• 2-Hour Override: In a specific operating mode (refer to the full manual for activation), pressing the SISSE/VÄLJA button will activate a 2-hour override, after which the timer will revert to its programmed schedule.

Puhastusprogrammid:

• TÜHJA SISSEMINE: During programming, press TÜHJA SISSEMINE to clear the current value or selection.
• TÜHJENDA MÄLU: To clear all programmed events, press and hold the TÜHJENDA MÄLU button for a few seconds until the display confirms the memory has been cleared.

7. Hooldus

The Intermatic ET2815C timer is designed for minimal maintenance.

• Puhastamine: Pühkige taimeri välispinda regulaarselt pehme ja kuiva lapiga. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
• Aku varundamine: The timer utilizes a 100-hour supercapacitor for backup power, eliminating the need for battery replacement. This supercapacitor recharges automatically when power is supplied to the unit.

8. Veaotsing

If you encounter issues with your Intermatic ET2815C timer, consider the following common troubleshooting steps:

• Taimeri ekraan on tühi: Check the power supply to the timer. Ensure the circuit breaker is ON and wiring connections are secure.
• Load Not Turning ON/OFF as Programmed:
  • Veenduge, et praegune kellaaeg ja päev on õigesti seadistatud.
  • Review your programmed ON/OFF events for accuracy, including the selected days of the week.
  • Check if a manual override is active.
  • Ensure the load itself is functioning correctly.
• Raskusaste programmeerimisel: Refer back to Section 6 and follow the programming steps carefully. Use the TÜHJA SISSEMINE button to correct mistakes during input.
• Taimer ei reageeri: Disconnect power to the timer for a few minutes at the circuit breaker, then restore power. This may reset the unit.

If problems persist after attempting these steps, contact Intermatic customer support for further assistance.

9. Tehnilised andmed

10. Garantii ja tugi

This Intermatic product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Intermatic websaidile.

Tehnilise toe, tootepäringute või volitatud teeninduskeskuste leidmiseks külastage palun veebilehte Intermaatiline websaidile või võtke otse ühendust nende klienditeenindusega.