Sissejuhatus
Thank you for choosing the Polk Audio PSW10 10-Inch Powered Subwoofer. This manual provides comprehensive instructions to help you set up, operate, and maintain your subwoofer for optimal performance. Please read these instructions carefully before use and retain them for future reference.
Mis on karbis
- Polk Audio PSW10 10-Inch Powered Subwoofer
- Toitekaabel
- Kasutusjuhend
- Policy Documentation
Põhifunktsioonid
- 10-Inch Dynamic Balance Woofer: Equipped with a 10-inch polymer-composite dynamic-balance cone driver for deep, precise bass.
- Built-in High-Current Ampelujõulisem: Delivers 50 watts continuous power and 100 watts dynamic power for impactful low-frequency reproduction.
- Non-Resonant Enclosure: All-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing minimizes resonance for clean sound.
- Mitmekülgne ühenduvus: Features line- and speaker-level inputs and speaker-level outputs for easy integration with various audio systems.
- Klippel Measurement Technology: Utilizes laser-based Klippel measurement technology for improved linearity and reduced distortion.
Joonis 1: Esiosa view of the Polk Audio PSW10 subwoofer, showcasing the 10-inch dynamic balance woofer and front-firing port for enhanced bass impact.
Seadistamine
1. paigutus
Optimal subwoofer placement is crucial for sound quality. Experiment with different locations in your room to find the best balance of bass response. Generally, placing the subwoofer in a corner can enhance bass output, while placing it closer to your main speakers can improve integration. Avoid placing it directly against a wall if it causes excessive booming.
2. Ühendused
The PSW10 offers flexible connection options:
- Line-Level Input (RCA): Connect your receiver's subwoofer output (LFE or Sub Out) to the LFE input on the subwoofer using an RCA cable. If your receiver has left and right pre-out jacks, use both left and right line-level inputs on the subwoofer.
- Kõlaritaseme sisendid/väljundid: For receivers without a dedicated subwoofer output, connect the speaker-level outputs from your receiver to the speaker-level inputs on the subwoofer. Then, connect the speaker-level outputs from the subwoofer to your main left and right speakers.
Figure 2: Rear panel connections and controls of the Polk Audio PSW10 subwoofer.
Kasutusjuhised
Once connected, adjust the following controls on the rear panel (refer to Figure 2):
- Helitugevuse juhtimine: Reguleerib subwooferi üldist väljundtaset. Alusta madala seadistusega ja suurenda järk-järgult, kuni bass sulandub sujuvalt peakõlarite heliga.
- Madalpääsfilter: This control sets the upper frequency limit for the subwoofer. Adjust it to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
- Phase Toggle Switch (0°/180°): Adjust this switch to achieve the best bass impact and blend with your main speakers. Listen to music or a movie scene with strong bass and switch between 0° and 180° to determine which setting provides the most coherent and impactful bass.
- 3-Way Power Switch (Auto/On/Off):
- Automaatne: The subwoofer will automatically turn on when it detects an audio signal and enter standby mode after a period of inactivity.
- Sees: The subwoofer remains continuously powered on.
- Väljas: The subwoofer is powered off.
Hooldus
To ensure the longevity and optimal performance of your Polk Audio PSW10 subwoofer, follow these maintenance guidelines:
- Puhastamine: Use a soft, dry cloth to wipe down the cabinet. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Paigutus: Hoidke subwooferi otsese päikesevalguse, soojusallikate ja liigse niiskuse eest. Tagage piisav ventilatsioon. ampülekuumenemise vältimiseks tõstepaneel.
- Võimsus: Disconnect the power cable from the wall outlet if the subwoofer will not be used for an extended period.
Veaotsing
| Probleem | Võimalik lahendus |
|---|---|
| Subwooferist ei kostu heli | Check power connection and ensure the 3-way power switch is set to 'On' or 'Auto'. Verify audio cable connections from the receiver to the subwoofer. Increase the volume control on the subwoofer. |
| Nõrk või moonutatud bass | Adjust the volume control and low-pass filter. Experiment with the phase toggle switch (0°/180°). Check for proper placement and ensure no obstructions are blocking the woofer or port. |
| Subwoofer hums | Ensure all connections are secure. Try plugging the subwoofer into a different electrical outlet. If using line-level inputs, try a ground loop isolator. |
| Subwoofer does not turn on automatically | Ensure the 3-way power switch is set to 'Auto'. Increase the volume output from your receiver's subwoofer channel to ensure a strong enough signal for auto-on detection. |
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Mudeli nimi | PSW10 |
| Kõlari tüüp | Subwoofer |
| Subwooferi läbimõõt | 10 tolli |
| Amptõstja Pidev võimsus | 50 vatti |
| Amplifier Dynamic Power | 100 vatti |
| Low-Pass Crossover Frequency | 80-160 Hz |
| Sisend Voltage | 120 volti (AC) |
| Toote mõõtmed (LxKxS) | 14" x 14.38" x 16.12" |
| Kauba kaal | 26 naela |
| Ühenduvustehnoloogia | Juhtmega (abiseade) |
| Värv | Must |
Figure 3: Dimensions of the Polk Audio PSW10 Subwoofer.
Garantii ja tugi
Your Polk Audio PSW10 Powered Subwoofer comes with a Piiratud garantii. For specific details regarding warranty coverage, terms, and conditions, please refer to the included Policy Documentation or visit the official Polk Audio website. For technical support or service inquiries, please contact Polk Audio customer service.
