1. Toote lõppview
The EPEVER Tracer4210AN-G3 is an advanced Maximum Power Point Tracking (MPPT) solar charge controller designed for off-grid solar systems. It efficiently manages power flow from solar panels to batteries, ensuring optimal charging and extending battery life. This model supports both 12V and 24V battery systems automatically and is compatible with various battery types, including lead-acid and lithium-ion.
This package includes the Tracer4210AN-G3 controller, an MT52 remote meter for monitoring and parameter setting, and a temperature sensor cable (RTS300R47K3.81A) for accurate temperature compensation.
2. Põhiomadused
- Ülikiire jälgimiskiirus ja garanteeritud jälgimise efektiivsus.
- Advanced MPPT control algorithm to minimize maximum power point loss rate and loss time.
- Compatible with lead-acid (Sealed, Gel, Flooded, User) and lithium-ion (LiFePO4, Li(NiCoMn)O2, User) batteries.
- Üldine negatiivse maanduse disain.
- Rated charge current: 40A.
- Max. PV input power: 520W (12V battery) / 1040W (24V battery).
- Max PV avatud vooluringtage: 100 VDC.
- Automaatne 12V/24V süsteemi helitugevustage tunnustus.
- Auto-saving function with two voltage disconnect levels.
- Laadimisvõimsuse ja voolu piiramise funktsioon.
- Iseseisev voltage regulation constant voltage output function.
- Battery temperature compensation function (for lead-acid batteries).
- Overheating power reduction function.
- MT52 Remote Meter for real-time data display, alarm information, and diversified load control modes.
3. Pakendi sisu
Tootepakett sisaldab tavaliselt järgmisi esemeid:
- 1 x Tracer4210AN-G3 MPPT Solar Charge Controller
- 1 x Remote Meter MT52
- 1 x Temperature Sensor Cable (RTS300R47K3.81A)
- 1 x RS485 kaabel
- 2 x User Manuals (one for controller, one for MT52)
4. Paigaldusjuhised
Always Connect the Battery First!
Please read the complete installation instructions to familiarize yourself with the installation steps before proceeding. Do not use electric screwdrivers for connections.
4.1. Elektriskeem
The diagram above illustrates the typical system connection. Ensure all components are connected in the correct order to prevent damage.
4.2. Ühenduse loomise etapid
- Ühendage aku: Ühendage aku esmalt laadimiskontrolleriga. Veenduge õiges polaarsuses (+ plussklemmiga ja - miinusklemmiga).
- Ühenda koormus: Ühendage alalisvoolukoormus laadimiskontrolleriga.
- Connect Solar Panel (PV Array): Connect the solar panel to the charge controller last.
4.3. Disconnection Steps
To disconnect the system, reverse the connection order:
- Disconnect Solar Panel (PV Array): Disconnect the solar panel first.
- Katkesta laadimine: Disconnect the DC load.
- Aku lahtiühendamine: Disconnect the battery last.
4.4. Detailed Wiring
Ensure all wires are securely fastened in their respective terminals. The controller features terminals for Solar Panel (10mm²/8AWG), Battery (10mm²/8AWG), and Load (10mm²/8AWG).
4.5. Connecting Remote Meter (MT52)
The MT52 remote meter connects to the COM port on the charge controller using an RS485 cable. This allows for remote monitoring and parameter adjustments.
4.6. Connecting to PC for Monitoring
For advanced monitoring and parameter setting, the controller can be connected to a PC using a CC-USB-RS485-150U cable. This allows access to the EPEVER PC software for detailed system analysis.
5. Kasutusjuhised
5.1. LCD-ekraan üleview
The controller features an LCD display for real-time monitoring of system status and parameters. Use the 'SELECT' and 'ENTER' buttons to navigate through the menus.
5.2. Aku tüübi määramine
Kontroller toetab erinevat tüüpi akusid. Aku tüübi määramiseks toimige järgmiselt.
- Press the "ENTER" button and hold for 5 seconds under the battery voltage liides.
- Press the "SELECT" button when the battery type interface is flashing to cycle through options (Sealed, Gel, Flooded, LiFePO4, Li(NiCoMn)O2, User).
- Press the "ENTER" button to confirm the battery type.
For lithium batteries, specific series configurations are available (e.g., LiFePO4 4s/8s, Li(NiCoMn)O2 3s/6s).
5.3. Setting Load Working Mode
The MT52 remote meter allows for diversified load control modes:
- Käsitsi juhtimine
- Valgus ON/OFF
- Tuli ON + Taimer
- Ajakontroll
Refer to the MT52 User Manual for detailed instructions on setting these modes.
5.4. Setting Battery Parameters (via MT50/MT52)
For advanced battery parameter settings, use the MT50/MT52 remote meter. Navigate to 'Control Para.' in the menu interface. You can adjust parameters such as Over Voltage Disconnect, Charging Limit, Equalize Charging, Boost Charging, Float Charging, Low Voltage Reconnect, and Discharge Limit. When setting parameters for 'USER' battery type, ensure the voltage parameters follow the specified logic (e.g., Over Voltage Katkesta ühendus Voltage > Laadimispiirang Voltagja).
6. Tehnilised andmed
| Parameeter | Väärtus |
|---|---|
| Nimilaadimisvool | 40A |
| System Voltage | 12V/24V automaatne töö |
| Max. PV Input Power (12V) | 520W |
| Max. PV Input Power (24V) | 1040W |
| Max PV Open Circuit Voltage | 100VDC |
| Aku mahttage Vahemik | 8V ~ 32V |
| Terminali suurus | 6AWG (16mm²) |
| Mõõdud (P*L*K) | 252 x 180 x 63mm (9.92 x 7.09 x 2.48 tolli kohta) |
| Netokaal | 1.65 kg (3.64 naela) |
| Kuva tüüp | LCD |
| Materjal | Lithium (compatible) |
7. Elektroonilised kaitsevahendid
The Tracer4210AN-G3 controller includes multiple electronic protections to ensure safe operation:
- PV ülevool/võimsus
- PV lühis
- PV vastupidine polaarsus
- Öine tagurpidi laadimine
- Aku vastupidine polaarsus
- Aku üle voltage
- Aku üle tühjenemine
- Aku ülekuumenemine
- Kontrolleri ülekuumenemine
- Liitiumaku madal temperatuur
- Koormuse lühis
- Koormuse ülekoormus
- TVS High Voltage Siirded
8. Veaotsing
If you encounter issues with your EPEVER MPPT Solar Charge Controller, consider the following:
- Ekraani/toite puudumine: Ensure the battery is correctly connected and has sufficient voltage. Check all wiring for loose connections or incorrect polarity.
- Laadimine puudub: Verify solar panel connections and ensure adequate sunlight. Check PV input voltage and current on the display. Confirm battery type settings are correct.
- Laadimine ei tööta: Check load connections and ensure the load is not overloaded or short-circuited. Verify load control mode settings on the MT52.
- Ebanormaalsed näidud: Ensure temperature sensor is correctly connected and not damaged. Check communication cables for secure connections.
For persistent issues, refer to the detailed troubleshooting section in the full user manual or contact EPEVER technical support.
9. Tugiteave
For technical assistance, product inquiries, or warranty claims, please contact EPEVER's authorized sales agent, Goland Century. They offer free technical support and have service centers in various regions.
Kontaktandmed:
- Tehniline tugi: Available through Goland Century technicians.
- Tarkvara allalaadimine: EPEVER PC software can be downloaded from the official EPEVER websaidile.
Please refer to the official EPEVER website or your product documentation for the most up-to-date contact details and support resources.
