Toode läbiview
The ANKO 200 Lumen COB Emergency LED Night Light is a versatile, cordless, and portable lighting solution designed for various applications. It features COB (Chip-on-Board) LED technology for bright, efficient illumination and offers multiple mounting options including magnetic attachment and adhesive stickers. This light is ideal for use in wardrobes, camping, kitchens, garages, attics, and for night reading, providing reliable light during power outages or in areas without direct power access.
Põhifunktsioonid
- 200 Lumen COB LED: Provides bright and wide illumination.
- Juhtmeta ja kaasaskantav: Battery-operated for flexible placement and easy transport.
- Mitu paigaldusvõimalust: Includes strong magnets for metal surfaces and adhesive stickers for other flat surfaces.
- Lihtne lüliti kasutamine: Easy to turn on and off.
- Vastupidav disain: Suitable for various indoor environments.
Ohutusteave
- Ärge jätke seadet äärmuslike temperatuuride ega otsese päikesevalguse kätte.
- Ärge kastke seadet vette ega muudesse vedelikesse.
- Kasutage ainult ettenähtud tüüpi patareisid ja veenduge paigaldamise ajal õiges polaarsuses.
- Hoida lastele kättesaamatus kohas.
- Ärge proovige seadet lahti võtta ega muuta. See tühistab garantii.
- Kui seadet pikemat aega ei kasutata, eemaldage patareid, et vältida lekkeid.
Pakendi sisu
- 1 x ANKO 200 Lumen COB Emergency LED Night Light
- Adhesive Stickers (pre-attached or separate, depending on model variant)
- Kasutusjuhend (see dokument)
- Märkus: Patareid ei kuulu tavaliselt komplekti ja need tuleb eraldi osta.
Seadistamine
Aku paigaldamine
- Locate the battery compartment cover on the back of the light.
- Panipaiga avamiseks libistage kaant või eemaldage see.
- Insert the required number of AAA batteries (typically 3x AAA, check device markings) according to the polarity indicators (+/-) inside the compartment.
- Sulgege akupesa kaas kindlalt.
Paigaldusvalikud
The ANKO LED Night Light offers two primary mounting methods:
Magnetiline paigaldus
- The light has built-in magnets on its back.
- Simply attach the light to any ferrous metal surface, such as a refrigerator, metal cabinet, or tool chest.
- Ensure the surface is clean and dry for optimal magnetic adhesion.
Adhesive Sticker Mounting
- If using the adhesive stickers, ensure the desired mounting surface is clean, dry, and smooth.
- Peel off the protective backing from the adhesive sticker(s) on the back of the light.
- Press the light firmly onto the chosen surface for at least 30 seconds.
- Allow the adhesive to set for a few hours (e.g., 24 hours) before applying significant pressure or repositioning.
Kasutusjuhised
Sisse/välja lülitamine
The ANKO LED Night Light is operated by a simple toggle switch, typically located on the side or front of the unit.
- Valguse sisselülitamiseks ON, slide the switch to the "ON" position.
- Valguse sisselülitamiseks VÄLJAS, slide the switch to the "OFF" position.
Kasutusstsenaariumid
- Wardrobes/Closets: Mount inside for easy visibility of clothes and items.
- Kitchen Cabinets: Provide extra light under cabinets or inside pantries.
- Garages/Attics: Illuminate dark corners or work areas where wired lighting is unavailable.
- Camping/Outdoor (sheltered): Use as a portable light source in tents or temporary shelters.
- Avariivalgustus: Keep readily available for power outages.
- Night Reading: Attach to a headboard or nearby surface for focused light.
Hooldus
Puhastamine
- Wipe the exterior of the light with a soft, dry cloth.
- Ärge kasutage abrasiivseid puhastusvahendeid, lahusteid ega karme kemikaale, kuna need võivad pinda kahjustada.
- Ensure the light is off and batteries are removed before cleaning.
Patarei vahetus
When the light dims or stops functioning, it is time to replace the batteries.
- Lülita tuli VÄLJA.
- Open the battery compartment as described in the "Battery Installation" section.
- Eemaldage vanad patareid ja kõrvaldage need vastavalt kohalikele eeskirjadele.
- Sisestage uued AAA-patareid, jälgides õiget polaarsust.
- Sulgege patareipesa kindlalt.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Valgus ei lülitu sisse. | Patareid on tühjad või valesti paigaldatud. | Asendage patareid uutega, tagades õige polaarsuse. |
| Valgus on hämar. | Patareid on tühjad. | Vahetage patareid välja. |
| Valgus langeb kinnituspinnalt. | Surface is not clean, smooth, or suitable for adhesive/magnet. | Clean the surface thoroughly. For adhesive, ensure it's smooth and allow setting time. For magnetic, ensure it's a strong ferrous metal. |
| Switch feels loose or unresponsive. | Sisemise mehhanismi probleem. | Contact customer support. Do not attempt to repair. |
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Mudel | B079MDCYM7 |
| Valgusallikas | COB LED |
| Lumeni väljund | 200 XNUMX luumenit |
| Toiteallikas | Battery (e.g., 3x AAA, not included) |
| Paigaldusvalikud | Magnetic, Adhesive Sticker |
| Mõõtmed | (Specific dimensions not provided in input, placeholder) |
| Kaal | (Specific weight not provided in input, placeholder) |
Garantii ja tugi
ANKO products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ANKO websait. Hoidke ostutšekk ostutõendina alles.
If you encounter any issues or have questions regarding your ANKO LED Night Light, please contact our customer support team:
- E-post: support@anko.com (Ntample email, actual contact info may vary)
- Telefon: 1-800-XXX-XXXX (Ntample phone, actual contact info may vary)
- Websait: www.anko.com (Ntample website, actual contact info may vary)
Please have your model number (B079MDCYM7) and purchase date ready when contacting support.
Important Notes on Media
Tootepildid: No useful product images were provided in the source data. The image link provided was a "No image available" placeholder. Therefore, no product images could be embedded in this manual.
Tootevideod: No official product videos from the seller were found in the provided data. Therefore, no videos could be embedded in this manual.