Handheld Digital Tachometer - DT-48 User Manual

1. Sissejuhatus

This manual provides comprehensive instructions for the safe and effective operation of your DigiTech Handheld Digital Tachometer, model DT-48. This device is designed for non-contact measurement of rotational speed (RPM) and total revolutions, offering high accuracy and ease of use for various applications.

Figure 1: DigiTech Handheld Digital Tachometer DT-48. This image displays the front of the tachometer, highlighting its five-digit LCD screen, the 'RPM/TOT' button for mode selection, and the 'MEM' button for memory functions. A laser warning symbol is visible at the top, indicating the laser emission point.

2. Ohutusalane teave

Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in injury or damage to the device.

• Laseri ohutus: This device emits a Class II laser. Do not stare directly into the laser beam or direct it at other people's eyes. Avoid prolonged exposure.
• Aku käsitsemine: Use only the specified battery type (4 AA batteries). Do not mix old and new batteries, or different types of batteries. Dispose of batteries according to local regulations.
• Keskkonnatingimused: Do not expose the device to extreme temperatures, humidity, or direct sunlight. Avoid dropping the device or subjecting it to strong impacts.
• Hooldus: Ärge proovige seadet lahti võtta ega muuta. Jätke kogu hooldus kvalifitseeritud personalile.

3. Toote omadused

The DigiTech DT-48 Handheld Digital Tachometer offers the following key features:

• Large, five-digit LCD screen for clear display of measurements.
• Ability to measure actual Revolutions Per Minute (RPM) or total revolutions.
• Equipped with a laser pointer for accurate targeting of the measurement point.
• Low-battery indicator to alert users when battery replacement is needed.
• Automatic storage of the last measurement, along with maximum and minimum readings.
• Comes with a protective carrying case for portability and storage.

4. Seadistamine

4.1 Aku paigaldamine

1. Locate the battery compartment cover on the rear of the tachometer.
2. Panipaiga avamiseks libistage kaant või eemaldage see.
3. Sisestage 4 AA-patareid, jälgides õiget polaarsust (+/-), nagu patareipesa sees näidatud.
4. Asetage patareipesa kate kindlalt tagasi.

4.2 Preparing the Target Surface

For accurate non-contact measurement, a reflective target must be applied to the rotating object. If the object's surface is already reflective, no additional target may be needed. Otherwise, attach a small piece of reflective tape (not included) to the rotating part where the laser beam will be directed.

5. Kasutusjuhised

5.1 Sisse-/väljalülitamine

Press the power button (usually located on the side or front) to turn the tachometer on. The LCD display will illuminate. Press and hold the power button again to turn the device off.

5.2 Selecting Measurement Mode (RPM / Total Revolutions)

The tachometer can measure either Revolutions Per Minute (RPM) or Total Revolutions. Press the 'RPM/TOT' button to toggle between these two modes. The selected mode will be indicated on the LCD display.

5.3 Mõõtmine

1. Ensure the tachometer is powered on and the desired measurement mode is selected.
2. Point the laser beam at the reflective target on the rotating object. Maintain a detecting distance between 50mm and 500mm.
3. Press and hold the measurement trigger button (often located on the side or front). The laser will activate, and the display will show the real-time measurement.
4. Release the measurement trigger button to hold the last reading on the display.

5.4 Mälufunktsioon

The tachometer automatically stores the last measurement, as well as the maximum and minimum measurements recorded during a measurement session.

• Press the 'MEM' button to cycle through the stored values: Last Reading, Maximum Reading, and Minimum Reading.
• To clear the memory, refer to the specific instructions in the device's full manual if available, or typically, turning the device off and on will clear the session memory.

6. Hooldus

6.1 Puhastamine

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Keep the laser emission and reception lenses clean for accurate readings.

6.2 Säilitamine

When not in use for extended periods, remove the batteries to prevent leakage. Store the tachometer in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Veaotsing

8. Tehnilised andmed

9. Garantii ja tugi

Garantiiteabe ja tehnilise toe saamiseks lugege ostu sooritamisel kaasas olnud dokumente või võtke ühendust edasimüüjaga. Hoidke ostutšekk ostutõendina alles.