Aerocool Cylon RGB Midi-Tower PC Case - ACCM-PV10012.11 User Manual

1. Üleview

The Aerocool Cylon RGB Midi-Tower PC Case, model ACCM-PV10012.11, is designed to house computer components, offering both functionality and aesthetic appeal. It features a side window panel for showcasing internal hardware and an RGB LED illumination strip on the front panel for customizable lighting effects. This case supports ATX motherboards and provides ample space for various components, including multiple storage drives and cooling solutions.

Joonis 1: Esiosa view of the Aerocool Cylon RGB Midi-Tower PC Case, highlighting its distinctive RGB LED strip.

2. Pakendi sisu

Palun kontrollige, kas pakendis on kõik esemed olemas:

• Aerocool Cylon RGB Midi-Tower PC Case (ACCM-PV10012.11)
• Tarvikute karp (sisaldab kruvisid, vahetükke, kaablisidemeid jne)
• Kasutusjuhend (see dokument)

3. Ohutusalane teave

Read and understand all safety instructions before installing or operating the PC case. Failure to do so may result in injury or damage to the product.

• Enne paigaldus- või hooldustöid ühendage seade alati toitepistikust lahti.
• Kahjustuste vältimiseks käsitsege kõiki komponente ettevaatlikult.
• Avoid touching electronic components directly; use anti-static precautions if possible.
• Hoidke väikesed osad ja tarvikud lastele kättesaamatus kohas.
• Ülekuumenemise vältimiseks tagage korpuse ümber piisav ventilatsioon.

4. Seadistamine ja installimine

4.1 Juhtumi ettevalmistamine

Before installing components, remove the side panels to access the interior of the case.

1. Asetage ümbris tasasele ja stabiilsele pinnale.
2. Locate the thumbscrews on the rear of the case securing the side panel.
3. Unscrew the thumbscrews and carefully slide the side panel backward, then lift it off. Repeat for the other side panel if necessary.

Figure 2: Left image shows the side panel attached, right image shows the side panel removed for access.

4.2 Emaplaadi paigaldamine

The Aerocool Cylon case supports ATX motherboards.

1. Install the I/O shield that came with your motherboard into the opening at the rear of the case.
2. Ensure motherboard standoffs are correctly aligned with your motherboard's screw holes. Install any missing standoffs from the accessory box.
3. Asetage emaplaat ettevaatlikult tugedele, joondades kruviaugud.
4. Kinnitage emaplaat lisatarvikute karbist leitud sobivate kruvidega.

4.3 Drive Installation (2.5" / 3.5")

The case provides bays for 2.5-inch and 3.5-inch drives.

1. Locate the drive bays within the case. Refer to the case diagram for specific locations.
2. For 3.5-inch HDDs, slide the drive into the designated tray or bay and secure it with screws.
3. For 2.5-inch SSDs, mount the drive onto the designated bracket or tray and secure it with screws.

4.4 Toiteploki (PSU) paigaldamine

The PSU is typically mounted at the bottom rear of the case.

1. Slide the PSU into its designated compartment from the rear of the case.
2. Align the PSU's screw holes with those on the case.
3. Secure the PSU with the provided screws.

4.5 Expansion Card (GPU) Installation

Install your graphics card or other expansion cards into the PCIe slots.

1. Remove the necessary PCI-E slot covers from the rear of the case corresponding to your expansion card's size.
2. Carefully insert the expansion card into the appropriate PCI-E slot on the motherboard until it clicks into place.
3. Secure the expansion card with screws.

Joonis 3: Tagumine view of the PC case, showing the expansion slots and I/O area.

4.6 Fan / Liquid Cooling Radiator Installation

The Aerocool Cylon case supports various cooling configurations.

• Tagumine: 1 x 120mm fan (pre-installed or optional).
• Ülemine: Supports 2 x 120mm fans or 1 x 240mm radiator.
• Alt: Supports 2 x 120mm fans.

1. Mount fans or radiators to their respective positions using the appropriate screws.
2. Connect fan power cables to the motherboard or a fan controller.

Figure 4: An interior shot of the case, illustrating potential fan and liquid cooling radiator placements.

4.7 Kaablihaldus

Effective cable management improves airflow and aesthetics.

• Route cables through the cutouts and behind the motherboard tray.
• Use cable ties (included in the accessory box) to bundle and secure cables.

4.8 Connecting Front Panel I/O

Ühendage esipaneeli kaablid emaplaadi vastavate pesadega.

• USB 3.0: Connect the USB 3.0 cable to the motherboard's USB 3.0 header.
• USB 2.0: Connect the USB 2.0 cables (x2) to the motherboard's USB 2.0 headers.
• HD-heli: Connect the HD Audio cable to the motherboard's audio header.
• Power/Reset/LEDs: Connect the small individual cables (Power SW, Reset SW, HDD LED, Power LED) to the motherboard's front panel headers according to your motherboard manual.

5. Arvutikorpuse käsitsemine

Once all components are installed and connected, reattach the side panels and power on your system.

• Toide sisse: Vajutage korpuse ülemisel I/O-paneelil asuvat toitenuppu.
• RGB valgustuse juhtimine: The front panel RGB LED illumination can be controlled via a dedicated button on the top I/O panel or through compatible motherboard software, depending on your setup. Refer to your motherboard manual for software control options.

6. Hooldus

Regulaarne hooldus aitab tagada teie arvuti korpuse ja komponentide optimaalse jõudluse ja pikaealisuse.

• Tolmufiltri puhastamine: The case features dust filters (e.g., on the top and bottom). Regularly remove and clean these filters to prevent dust buildup and maintain good airflow. Use compressed air or a soft brush.
• Üldpuhastus: Kasutage pehmet, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For the transparent side panel, use a microfiber cloth to prevent scratches.

7. Veaotsing

Probleemide ilmnemisel kaaluge järgmisi levinud tõrkeotsingu samme.

• Toide puudub: Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position. Verify all power cables to the motherboard and components are securely seated.
• Ventilaatorid ei pöörle: Check that all fan cables are correctly connected to the motherboard or fan controller. Ensure the system is receiving power.
• RGB Not Working: Confirm RGB cables are properly connected. If using motherboard software, ensure it is installed and configured correctly.
• Lahtised ühendused: Recheck all internal connections (power, data, front panel I/O) to ensure they are firmly seated.

8. Tehnilised andmed

9. Garantii teave

The Aerocool Cylon RGB Midi-Tower PC Case is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official AeroCool webTäpsemad garantiitingimused, sh garantiiperiood ja nõude esitamise kord, leiate veebisaidilt.

10. Toetus

For further assistance, technical support, or to download the latest drivers and software, please visit the official AeroCool websait:

Websait: www.aerocool.io

You may also contact AeroCool customer service through the contact information provided on their websaidile.