Blum B970.1002-5

Blum Blumotion pehme sulgur Damper

Mudel: B970.1002-5

1. Sissejuhatus

Thank you for choosing the Blum Blumotion Soft Close Damper. This product is designed to provide a quiet and gentle closing action for cabinet doors, preventing slamming and reducing wear. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Blumotion dampesiteks

2. Ohutusalane teave

3. Pakendi sisu

Teie pakett peaks sisaldama järgmisi esemeid:

4. Paigaldamine

The Blumotion damper is designed for easy installation into a 10mm bullet hole. Follow these steps for optimal performance:

  1. Identify Installation Location: Determine the best location on your cabinet frame or door to install the damper. It should be positioned so that the cabinet door makes contact with the damper when closing. Typically, this is on the cabinet frame near the hinge side.
  2. Puurige auk: Using a 10mm drill bit, carefully drill a hole approximately 50mm (2 inches) deep into the chosen location. Ensure the hole is straight and clean.
  3. Sisestage Dampee: Gently push the Blumotion damper into the drilled hole. The damper should fit snugly. If it is too loose, the hole may be too large. If it is too tight, do not force it, as this may damage the dampee.
  4. Testi funktsionaalsus: Close the cabinet door slowly to ensure it makes contact with the damper and closes softly. Adjust the position if necessary. For optimal soft-closing, multiple dampers may be required for larger or heavier doors.
Blum Blumotion pehme sulgur Damper, angled view

Joonis 1: Nurga all view of the Blum Blumotion Soft Close Damper. This image shows the cylindrical body and the grey soft-close tip.

Blum Blumotion pehme sulgur Damper, straight view

Figure 2: Straight-on view of the Blum Blumotion Soft Close Damper. This image highlights the full length of the damper and its grey tip.

5. Operatsioon

Once installed, the Blumotion damper operates automatically. As the cabinet door closes, it will make contact with the damper's tip. The internal mechanism of the damper will then slow down the door's movement, ensuring a gentle and silent close. No manual adjustment is typically required after proper installation.

6. Hooldus

The Blumotion Soft Close Damper requires minimal maintenance:

7. Veaotsing

ProbleemVõimalik põhjusLahendus
Uks ei sulgu pehmelt.Damper not making proper contact with the door, or door is too heavy for a single dampee.Veenduge, et damper is positioned correctly. For heavier doors, consider installing an additional dampee.
Damper falls out of the hole.Hole is too large, or damper was not fully inserted.Re-insert the damper firmly. If the hole is too large, a small amount of wood glue or a similar adhesive can be used to secure it.
Door still slams.Damper is faulty or not installed correctly.Verify installation steps. If the issue persists, the dampvõib vajada väljavahetamist.

8. Tehnilised andmed

9. Garantii ja tugi

For specific warranty information, please refer to the documentation provided with your purchase or contact Blum directly. For technical support or further assistance, please visit the official Blum websaidil või võtke ühendust oma klienditeenindusega.

Blum Official Websait: www.blum.com

Seotud dokumendid - B970.1002-5

Preview Blumi riistvara: pingutuseta kohandused veatu kapidisaini saavutamiseks
Avastage, kuidas Blumi uuenduslikud tõstesüsteemid, sahtlisüsteemid, hingesüsteemid ja taskusüsteemid võimaldavad vaevata kolmemõõtmelisi kohandusi, et saavutada kapi täiuslik joondamine ja laitmatu disain. Kiire juhendamise saamiseks lugege lähemalt EASY ASSEMBLY rakenduse kohta.
Preview Blumi AVENTOS tõstesüsteemid: Täiustage oma köögikappe
Explore Blum's innovative AVENTOS lift systems for upper cabinets. Discover solutions for effortless access, smooth operation, and soft closing, designed to enhance kitchen and living spaces. Find detailed specifications and ordering information.
Preview Blumi TIP-ON BLUMOTION TANDEMBOXile: omadused, planeerimine ja tellimine
Põhjalik juhend Blumi TIP-ON BLUMOTION süsteemi kohta TANDEMBOX-sahtlitele, mis kirjeldab üksikasjalikult omadusi, tehnilisi kirjeldusi, tellimisinfot ja planeerimisnõudeid sahtlite sujuvaks ja vaikseks tööks.
Preview Blum TANDEM plus BLUMOTION 563F paigaldusjuhised ja spetsifikatsioonid
Paigaldusjuhised ja spetsifikatsioonid Blum TANDEM plus BLUMOTION 563F täielikult väljatõmmatavate peidetud sahtliliugurite kohta. Hõlmab sahtlikarbi ettevalmistust, paigaldamist, reguleerimist ja rakendusviise (raamiga, raamita, süvistatav).
Preview Blum REVEGO taskusüsteem: Planungs- und Bestellinformationen
Entdecken Sie REVEGO Pocketsysteme von Blum für moderne Raumkonzepte. Dieeses Dokument bietet detaillierte Planungs-, Auswahl- und Bestellinformationen für Einzeltür- und Doppeltüranwendungen.
Preview Blumi AVENTOS tõstesüsteemid: põhjalik tootejuhend
Avastage Blumi uuenduslikke AVENTOS-tõstesüsteeme, mis on loodud moodsatele köökidele ja kappide jaoks. Avastage erinevate mudelite (nt HF, HS, HL, HK, HK-S ja HK-XS) omadused, rakendused, planeerimis- ja paigaldusdetailid, sh SERVO-DRIVE'i ja TIP-ONi lahendused.