1. Sissejuhatus
This manual provides detailed instructions for the installation, adjustment, maintenance, and troubleshooting of your Blum Blumotion 110 Degree Soft Close Frameless Hinges. Please read this manual thoroughly before beginning installation to ensure proper function and longevity of your product. Retain this manual for future reference.
2. Toote lõppview
The Blum Blumotion 110 Degree Soft Close Frameless Hinges are designed for full overlay cabinet doors, providing a smooth and silent closing action. These hinges feature integrated Blumotion technology, which can also be deactivated if desired. They offer 3-dimensional adjustment for precise door alignment.
Image: An assembled Blum Blumotion 110 Degree Soft Close Frameless Hinge, showing the main body, cup, and mounting plate. This image illustrates the complete hinge unit.
3. Pakendi sisu
Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:
- 8 x Blum Blumotion 110 Degree Soft Close Hinges (4 pairs)
- 8 x kinnitusplaati
- Screws for hinge and mounting plate attachment
- Hinge Guard Plates (if applicable to specific model variant)
4. Põhiomadused
- Designed for full overlay doors.
- Integrated Blumotion soft-close mechanism for silent and effortless closing.
- Blumotion soft-close function can be easily disabled via a switch on the hinge arm.
- 3-dimensional adjustment (side-to-side, depth, and height) for precise door alignment.
- Quick-disconnect feature for easy door removal and reattachment.
5. Ohutusalane teave
Always exercise caution when working with tools and hardware. Wear appropriate personal protective equipment, such as safety glasses. Keep small parts and screws away from children. Ensure cabinet doors are securely attached before use to prevent injury.
6. Seadistamine ja installimine
These hinges are designed for frameless cabinets. Installation on face frame cabinets requires a spacer block to be mounted on the inside of the cabinet sidewall to align with the face frame surface.
6.1 Preparing the Cabinet Door
- Determine the hinge cup drilling positions on the cabinet door. For 110-degree hinges, the standard drilling distance from the door edge is typically 3mm to 6mm, but always refer to a drilling template for precise measurements.
- Using a 35mm Forstner bit, drill the hinge cup holes to the recommended depth (usually 13mm). Ensure holes are clean and free of debris.
- Place the hinge cup into the drilled hole and secure it with the provided screws.
Pilt: Lähivõte view of a hinge cup being inserted into a pre-drilled hole on a cabinet door, with screws ready for fastening. This demonstrates the first step of attaching the hinge to the door.
6.2 Attaching Mounting Plates to Cabinet
- Mark the positions for the mounting plates on the inside of the cabinet side panel. The vertical position of the mounting plates should align with the hinges on the door.
- Pre-drill pilot holes for the mounting plate screws. Using a self-centering drill bit is recommended for accuracy.
- Secure the mounting plates to the cabinet side panel using the provided screws. Ensure they are level and correctly spaced.
Image: A mounting plate being screwed into the interior side panel of a cabinet, showing the screw holes and the plate's orientation. This illustrates how the mounting plate is secured to the cabinet structure.
6.3 Attaching the Door to the Cabinet
- Align the hinge arm with the mounting plate.
- Press the hinge arm onto the mounting plate until it clicks into place. This indicates a secure connection.
- Test the door's movement to ensure it opens and closes smoothly.
7. Kasutamine ja seadistamine
The Blumotion hinges offer 3-dimensional adjustment to achieve perfect door alignment.
7.1 3-Dimensional Adjustment
- Küljest küljele reguleerimine: Use the front screw on the hinge arm to move the door left or right. Turning clockwise moves the door towards the hinge side, counter-clockwise moves it away.
- Sügavuse reguleerimine: Use the rear screw on the hinge arm to move the door in or out relative to the cabinet frame. This adjusts the gap between the door and the cabinet.
- Kõrguse reguleerimine: The mounting plate typically has elongated holes for height adjustment. Loosen the mounting plate screws slightly, adjust the door up or down, and then re-tighten the screws.
Image: A close-up of a Blumotion hinge arm, highlighting the different adjustment screws for side-to-side and depth adjustments. This image helps identify which screws control specific movements.
7.2 Disabling Blumotion Soft-Close
Each hinge features a small switch on the hinge arm that allows you to deactivate the Blumotion soft-close function. This can be useful for lighter doors or if you prefer a traditional closing action. Simply slide the switch to the 'off' position to disable, and 'on' to re-enable.
8. Hooldus
To ensure optimal performance and longevity of your Blumotion hinges:
- Puhastamine: Pühkige hinged perioodiliselt pehme lapigaamp lapiga. Vältige abrasiivseid puhastusvahendeid või lahusteid.
- Ülevaatus: Annually check all screws for tightness. Re-tighten if necessary, but do not overtighten.
- Määrimine: The Blumotion mechanism is maintenance-free and does not require lubrication.
9. Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Door is misaligned (gaps, uneven). | Incorrect hinge adjustment. | Use the 3-dimensional adjustment screws (side-to-side, depth, height) to realign the door. Refer to Section 7.1. |
| Soft-close not working or door slams. | Blumotion mechanism deactivated or damaged. | Check the Blumotion switch on each hinge arm (Section 7.2). Ensure it is in the 'on' position. If still not working, the hinge may need replacement. |
| Door sags or feels loose. | Lahtised kinnituskruvid. | Tighten all screws on both the hinge cup and the mounting plate. Do not overtighten. |
10. Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Mudeli number | 71B3550 |
| Kaubamärk | Blum |
| Avanemisnurk | 110 kraadi |
| Pehme sulgemise mehhanism | Integrated Blumotion (deactivatable) |
| Door Overlay Type | Full Overlay |
| Kapi tüüp | Raamita |
| Kohandamine | 3-dimensional (side, depth, height) |
| Materjal | Steel (Full layering) |
| Viimistluse tüüp | Lõpetamata |
| Värv | Poleeritud kroom |
| Product Dimensions (per hinge) | Approx. 7.4 x 7.01 x 1.97 inches (packaged) |
| Toote kaal (kogupakend) | 1.87 naela |
| UPC | 649862996818 |
11. Garantii teave
Blum products are known for their quality and durability. For specific warranty details, please refer to the official Blum webveebisaidilt või võtke otse ühendust nende klienditeenindusega. Hoidke ostutõendit alles garantiinõuete esitamiseks.
12. Klienditugi
If you have any questions, require assistance with installation, or need to report a defective product, please contact Blum customer support through their official website or the retailer from whom you purchased the hinges. Please have your model number (71B3550) and purchase information ready.
