1. Sissejuhatus
This manual provides essential information for the safe and efficient operation of your Intermec PC43T Thermal Transfer/Direct Thermal Desktop Printer. It covers setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the printer and retain it for future reference.
The Intermec PC43T is a versatile 4-inch desktop printer designed for various labeling applications, featuring both thermal transfer and direct thermal printing capabilities, a 203 DPI print resolution, an LCD display for easy navigation, and multiple USB connectivity options.
2. Ohutusalane teave
Always observe the following safety precautions to prevent injury and damage to the printer:
- Toiteallikas: Use only the power adapter supplied with the printer. Ensure the power outlet is properly grounded.
- Ventilatsioon: Do not block ventilation openings. Ensure adequate airflow around the printer to prevent overheating.
- Keskkond: Operate the printer in a clean, dry environment, away from direct sunlight, excessive heat, or moisture.
- Käitlemine: Vältige printeri maha kukkumist või tugevate löökide saamist.
- Hooldus: Disconnect the power cord before performing any maintenance or cleaning. Do not attempt to service the printer yourself; refer to qualified service personnel.
3. Printeri komponendid
Familiarize yourself with the main components of your Intermec PC43T printer:
This image displays the Intermec PC43T desktop label printer. The printer is dark gray with an integrated LCD display on top, showing menu options like 'Programs', 'Setup', 'Tools', and 'Wizards'. A label with a barcode and text 'EDI-DOC' is shown exiting the front of the printer. The printer features a blue button on the right side and several control buttons near the LCD screen.
- LCD ekraan: Provides menu navigation and status information.
- Juhtnupud: Used to navigate menus and confirm selections on the LCD display.
- Media Exit Slot: Where printed labels or receipts exit the printer.
- Media Cover Latch: (Blue button on the right side) Releases the top cover to access media and ribbon compartments.
- Toiteport: Connects the printer to the power adapter.
- USB-pordid: Includes USB 2.0 and two USB Host ports for connectivity.
4. Algseadistus
4.1. Lahtipakkimine
- Eemaldage printer ja kõik lisatarvikud ettevaatlikult pakendist.
- Veenduge, et kõik pakkimislehel loetletud komponendid on olemas.
- Säilitage pakend edaspidiseks transportimiseks või hoiustamiseks.
4.2. Toite ühendamine
- Ühendage toitejuhe toiteadapteriga.
- Ühendage toiteadapter printeri toitepessa.
- Ühendage toitejuhe maandatud pistikupessa.
4.3. USB ühendamine
- Connect one end of the USB cable to the USB 2.0 port on the printer.
- Ühendage USB-kaabli teine ots arvuti vabasse USB-porti.
- The printer also features two USB Host ports for connecting peripherals.
4.4. Kandja laadimine
The PC43T supports both thermal transfer (requires ribbon) and direct thermal (no ribbon) media. Refer to the specific media loading instructions provided with your media type.
- Press the blue media cover latch to open the printer's top cover.
- Place the roll of labels onto the media supply spindle, ensuring the labels feed correctly.
- Thread the media through the guides and under the print head.
- If using thermal transfer media, install the ribbon according to the instructions provided with the ribbon.
- Sulgege ülemine kaas, kuni see kindlalt kinnitub.
5. Kasutusjuhised
5.1. Toite sisse / välja lülitamine
- Sisselülitamiseks: Press the power button located on the printer. The LCD display will illuminate.
- Väljalülitamiseks: Vajutage ja hoidke toitenuppu all, kuni printer välja lülitub.
5.2. LCD-ekraani kasutamine
The LCD display provides access to printer settings and status. Use the control buttons adjacent to the display to navigate:
- Üles/alla nooled: Kerige menüüvalikuid.
- Enter nupp: Valige suvand või kinnitage säte.
- Tagasi nupp: Eelmisesse menüüsse naasmine.
Levinud menüüvalikute hulka kuuluvad:
- Programmid: Access pre-loaded printing applications.
- Seadistamine: Configure printer settings such as media type, print darkness, and network settings.
- Tööriistad: Perform calibration, test prints, or view printer information.
- Wizards: Guided setup processes for specific tasks.
5.3. Driver Installation and Printing
Before printing, install the appropriate printer drivers on your computer. Drivers are typically available from the Intermec support website. Once installed, you can print labels from compatible software applications.
- Veenduge, et printer on sisse lülitatud ja arvutiga ühendatud.
- Avage oma siltide kujundamise tarkvara või rakendus.
- Select the Intermec PC43T as your printer.
- Configure print settings (e.g., label size, orientation) as needed.
- Käivitage printimistöö.
6. Hooldus
Regular maintenance ensures optimal printer performance and extends its lifespan.
6.1. Prindipea puhastamine
A dirty print head can cause poor print quality. Clean it regularly, especially after changing media or ribbon.
- Lülitage printer välja ja eemaldage toitejuhe.
- Avage meediakaas.
- Pühkige prindipea pinda õrnalt isopropüülalkoholiga niisutatud ebemevaba lapiga.
- Enne kaane sulgemist ja toite uuesti ühendamist laske prindipeal täielikult kuivada.
6.2. Replacing Supplies
Replace labels and thermal transfer ribbons as they run out. Always use Intermec-approved supplies for best results.
- Sildid: Follow the media loading instructions in Section 4.4.
- Ribbon (Thermal Transfer): Follow the specific instructions provided with your ribbon. Ensure the ribbon is correctly tensioned.
7. Veaotsing
This section addresses common issues you might encounter with your PC43T printer.
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Pole jõudu | Toitejuhe lahti ühendatud; pistikupesa vigane. | Kontrollige toiteühendusi; proovige teist pistikupesa. |
| Kehv prindikvaliteet | Dirty print head; incorrect print darkness; media/ribbon mismatch. | Clean print head (Section 6.1); adjust print darkness via LCD menu; ensure correct media/ribbon type. |
| Silte ei söödeta õigesti | Media loaded incorrectly; media guides not adjusted. | Reload media (Section 4.4); adjust media guides to fit label width. |
| Arvuti ei tuvasta printerit | USB cable disconnected; drivers not installed or corrupted. | Check USB connection; reinstall printer drivers. |
| LCD display shows error message | Specific printer error. | Refer to the printer's on-screen help or the Intermec support website for specific error codes. |
8. Tehnilised andmed
Key technical specifications for the Intermec PC43T printer (Model: PC43TB00100201):
- Trükitehnoloogia: Soojusülekanne / otsene termiline
- Prindi eraldusvõime: 203 XNUMX DPI
- Maksimaalne meediaformaat: 4 tolli
- Kuva: LCD-ekraan
- Ühenduvus: USB 2.0, 2 USB Host Ports
- Eriomadused: Tear-Off function, Real Time Clock
- Sisaldab: Latin fonts, US power cord
- Kauba kaal: Ligikaudu 1 nael
- Värv: Must
9. Garantii ja tugi
For warranty information, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) website. Technical support and additional resources, including updated drivers and firmware, can be found on the manufacturer's support portal.
If you require service or have questions not covered in this manual, please contact your authorized Intermec dealer or technical support.
