PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Sissejuhatus

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Ohutusjuhised

Enne seadme kasutamist lugege läbi kõik ohutusjuhised ja mõistke neid. Nende juhiste eiramine võib põhjustada laserkiirgusega kokkupuudet, elektrilööki, tulekahju või tõsiseid vigastusi.

• Laseri ohutus: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Aku ohutus: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Töökeskkond: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Hooldus: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Pakendi sisu

Veenduge, et pakendis on kõik esemed olemas:

• PeakTech P 2800A Laser Distance Meter
• Vöökott
• 2 x 1.5 V AAA leelispatareid
• User Manual (German and English)
• Kalibreerimise kinnitus

4. Seade üleview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

Joonis 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

Joonis 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

Joonis 3: Lähivõte view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

Joonis 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• ÜHIK: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Võrdluspunkti nupp: Changes the measurement reference point (front, rear, flip-out stop).
• Mälu nupp: Accesses stored measurements.
• Taustvalgustuse nupp: Toggles display backlight.
• LCD ekraan: Multi-line display showing current measurements, previous results, and function icons.

5. Seadistamine

5.1 Aku paigaldamine

1. Leidke seadme tagaküljelt patareipesa kate.
2. Panipaiga avamiseks libistage kaant või eemaldage see.
3. Insert two 1.5V AAA alkaline batteries, ensuring correct polarity (+/-).
4. Sulgege akupesa kaas kindlalt.

The device will automatically power on or can be powered on by pressing the MEETMED nuppu.

6. Kasutusjuhised

6.1 Toide sisse/välja

• Toide sisse: Vajutage nuppu MEETMED nuppu.
• Toide välja: Vajutage ja hoidke all nuppu OFF/CLEAR button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Mõõtühikute muutmine

Vajutage nuppu ÜHIK button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Setting the Reference Point

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Võrdluspunkt button to switch between these options. The current reference point is indicated on the display.

6.4 Single Distance Measurement

1. Suuna laser sihtmärgile.
2. Vajutage nuppu MEETMED nuppu üks kord laseri aktiveerimiseks.
3. Vajutage nuppu MEETMED button again to take the measurement. The result will be displayed.

6.5 Pidev mõõtmine (min/max)

1. Vajutage ja hoidke all nuppu MEETMED nuppu umbes 2 sekundit all. Seade lülitub pideva mõõtmise režiimi.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Vajutage MEETMED uuesti, et peatada pidev mõõtmine.

6.6 Pindala mõõtmine

1. Vajutage nuppu Pindala / maht button once to enter area measurement mode. An icon for area will appear on the display.
2. Mõõtke esimene külg (nt pikkus) vajutades MEETMED.
3. Mõõtke teine ​​külg (nt laius) vajutades MEETMED.
4. Kuvatakse arvutatud pindala.

6.7 Mahu mõõtmine

1. Vajutage nuppu Pindala / maht button twice to enter volume measurement mode. An icon for volume will appear.
2. Mõõtke pikkust vajutades MEETMED.
3. Mõõtke laius vajutades MEETMED.
4. Mõõtke kõrgust vajutades MEETMED.
5. Kuvatakse arvutatud maht.

6.8 Pythagorase mõõtmine (kaudne mõõtmine)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Vajutage nuppu Pythagorase button to select the desired indirect measurement mode.
2. Järgige ekraanil kuvatavaid juhiseid vajalike mõõtmiste (nt hüpotenuus, alus) tegemiseks.
3. The device will calculate and display the unknown height or distance.

6.9 Liitmine ja lahutamine

After taking a measurement, you can add or subtract subsequent measurements:

1. Tehke mõõtmine.
2. Vajutage nuppu + button for addition or - button for subtraction.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Korrake vastavalt vajadusele.

6.10 Mälufunktsioon

The device can store up to 99 measurement values.

• Kauplus: Measurements are automatically stored.
• Tuletame meelde: Vajutage nuppu Mälu nuppu view stored values. Use the + ja - buttons to scroll through the memory.
• Tühjenda mälu: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Hooldus

• Puhastamine: Kasutage pehmet, damp Seadme puhastamiseks kasutage lappi. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid. Puhastage laserläätse ettevaatlikult pehme lapiga, sarnaselt kaameraläätsede puhastamisele.
• Hoiustamine: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Patarei vahetus: Vahetage patareid välja, kui ekraanile ilmub patareide tühjenemise indikaator.

8. Veaotsing

9. Tehnilised andmed

10. Garantii ja tugi

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech websaidil või võtke ühendust oma klienditeenindusega.