Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Sissejuhatus

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Ohutusalane teave

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Kasutage ainult printeriga kaasasolevat toitejuhet.
• Ärge jätke printerit vee ega liigse niiskuse kätte.
• Veenduge, et printer oleks asetatud stabiilsele ja tasasele pinnale.
• Vältige ventilatsiooniavade blokeerimist.
• Disconnect power before cleaning or servicing the printer.
• Ärge proovige printerit ise avada ega parandada. Pöörduge kvalifitseeritud hooldustöötaja poole.

3. Pakendi sisu

Veenduge, et pakendis on kõik esemed olemas:

• Intermec PC43TB01100201 Printer Unit
• USA toitejuhe
• Kiirjuhend (ei kuulu sellesse kasutusjuhendisse)
• Software/Driver CD (may vary by package)

4. Seadistamine

4.1 Lahtipakkimine ja paigutamine

1. Eemaldage printer ettevaatlikult pakendist.
2. Asetage printer tasasele, stabiilsele ja piisava ventilatsiooniga pinnale.
3. Ensure easy access to power outlets and computer ports.

4.2 Toite ühendamine

1. Connect the supplied US power cord to the printer's power input.
2. Ühendage toitejuhtme teine ​​ots maandatud pistikupessa.

4.3 Arvutiga ühendamine

The PC43TB01100201 printer supports USB and LAN connectivity.

• USB ühendus: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• LAN-ühendus: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Avage printeri kaas.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Sulgege printeri kaas.

5. Kasutusjuhised

5.1 Sisse-/väljalülitamine

• Sisselülitamiseks: Press the power button located on the printer. The LCD display will illuminate.
• Väljalülitamiseks: Vajutage ja hoidke toitenuppu all, kuni printer välja lülitub.

5.2 LCD-ekraani kasutamine

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Trükkimine

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Avage oma siltide kujundamise tarkvara või rakendus.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Käivitage printimistöö.

The printer features a tear-off function for easy label separation after printing.

6. Hooldus

6.1 Printeri puhastamine

Regulaarne puhastamine aitab säilitada prindikvaliteeti ja pikendab printeri eluiga.

• Prindipea: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Plaadirull: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Välimus: Pühkige välispinda pehme, damp riie. Ärge kasutage abrasiivseid puhastusvahendeid.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Veaotsing

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Printer ei reageeri:
  • Kontrollige toiteühendusi.
  • Verify USB or LAN cable connections.
  • Taaskäivitage printer ja arvuti.
  • Ensure printer drivers are correctly installed.
• Kehv prindikvaliteet:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Sildid ei söödeta õigesti:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Tehnilised andmed

9. Garantii ja tugi

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Tootja: Intermec
• Mudeli number: PC43TB01100201
• For technical assistance, visit the official Intermec support websaidil või võtke ühendust nende klienditeenindusega.