Logitech Circle 2 aknakinnituse lisatarviku kasutusjuhend

Sissejuhatus

The Logitech Circle 2 Window Mount is an accessory designed to allow your Circle 2 Wired or Wire-Free camera to monitor outdoor areas from inside your home. This mount is specifically engineered to reduce reflections when the camera is placed behind a window, providing clear 1080p Full HD video with wide-angle view and night vision capabilities. It is ideal for single-pane windows and ensures your camera remains powered when used with a Circle 2 Wire-Free camera, converting it to a wired setup.

Mis on karbis

• Aknakinnitus
• Kasutusjuhend

Image: The Logitech Circle 2 Window Mount, showing its circular design and connection points.

Seadistamine

Follow these steps to properly install your Logitech Circle 2 Window Mount:

1. Kaamera ettevalmistamine: Ensure your Circle 2 camera is powered off. Remove any existing Wired or Wire-Free mount and the Camera Cover from your Circle 2 camera.
2. Attach Window Components: Attach the specialized Window Camera Cover and the Window Mount to your Circle 2 camera. Ensure they are securely fastened.
3. Position the Window Ring: Place the Window Ring onto the desired window pane. This ring provides the adhesive surface for the mount. For best results, use on a clean, single-pane window.
4. Attach Camera to Window: Carefully attach the camera, with the Window Mount already connected, to the Window Ring on the window. Press firmly to ensure a secure adhesion.
5. Toide sisse: Connect the power cable to the Window Mount and plug it into a power outlet. If using a Circle 2 Wire-Free camera, note that it will now operate as a wired camera.

Image: A diagram illustrating the separation of the Circle 2 camera from its standard mount and its connection to the Window Mount.

Image: The Logitech Circle 2 camera fully assembled with the Window Mount, ready for attachment to a window.

Käitamise kaalutlused

The Window Mount is designed to optimize your Circle 2 camera's performance when viewing through glass. Key operational aspects include:

• Reflection Reduction: The unique design of the mount helps to minimize reflections that can occur when a camera records through a window. This is most effective on single-pane windows.
• Öine nägemine: The Circle 2 camera's built-in night vision LEDs are disabled when using the Window Mount to prevent reflections off the glass. For effective night vision through a window, external lighting in the monitored area may be required.
• Juhtmega töö: When a Circle 2 Wire-Free camera is connected to this mount, it will draw power from the mount and operate as a wired camera, bypassing its battery.
• Lainurk View: The mount does not impede the camera's 180-degree wide-angle field of view, allowing for comprehensive monitoring of the outdoor area.

Hooldus

To ensure optimal performance and longevity of your Window Mount:

• Puhastamine: Gently wipe the mount and the camera's lens with a soft, dry, lint-free cloth. Avoid abrasive cleaners or solvents.
• Window Surface: Periodically clean the window surface where the mount is attached to maintain clear viewing and strong adhesion.
• Kleepuv rõngas: If the adhesive ring loses its stickiness, replacement rings may be available from Logitech support.

Veaotsing

If you encounter issues with your Window Mount or connected Circle 2 camera, consider the following:

• Kaamera võrguühenduseta:
  • Ensure the power cable is securely connected to the mount and the power outlet.
  • Veenduge, et teie WiFi-võrk on aktiivne ja stabiilne.
  • Try restarting your camera by unplugging it for 10 seconds and plugging it back in.
  • If the issue persists, attempt a camera reset. Refer to your Circle 2 camera's main user manual for specific reset instructions.
• Poor Image Quality / Reflections:
  • Ensure the window surface is clean.
  • Confirm the mount is flush against the window.
  • The mount works best with single-pane windows. Double-pane windows may still exhibit some reflections.
• Öise nägemise probleemid:
  • Remember that the camera's internal night vision LEDs are disabled with this mount. Ensure there is sufficient external ambient light for clear night recording.

Tehnilised andmed

Garantii ja tugi

For information regarding the product warranty, please refer to the warranty documentation included with your purchase or visit the official Logitech support website. For additional assistance, troubleshooting, or to access the full user manual in PDF format, please visit Logitechi tugi or consult the provided user guide PDF.