KERN PCD 6K-4 täppislabori kaalu kasutusjuhend

1. Sissejuhatus

This manual provides essential instructions for the safe and efficient operation of your KERN PCD 6K-4 Precision Laboratory Balance. This laboratory scale features a separate weighing platform, making it ideal for use in specialized environments such as glove-bags or extractor cabinets, particularly when weighing toxic, volatile, or contaminated substances. It includes a PRE-TARE function for manual extraction of known container weights, useful for precise filling quantity controls.

Palun lugege see kasutusjuhend enne esmakordset kasutamist hoolikalt läbi ja hoidke see alles edaspidiseks kasutamiseks.

2. Ohutusjuhised

• Kasutage kaalu alati stabiilsel, tasasel ja vibratsioonivabal pinnal.
• Avoid exposing the balance to extreme temperatures, direct sunlight, or high humidity.
• Ärge koormake kaalu üle selle maksimaalse kandevõime 6000 g.
• Keep the balance clean and free from dust and chemical spills.
• Kasutage ainult seadmega kaasas olevat toiteadapterit.
• Do not attempt to disassemble or repair the balance yourself. Refer to qualified service personnel.

3. Pakendi sisu

Pärast lahtipakkimist veenduge, et kõik esemed on olemas ja kahjustamata:

• KERN PCD 6K-4 Weighing Platform
• Digitaalne kuvamisseade
• Toiteadapter
• Wind Protection Ring (for models with Ø 105 mm weighing plate)
• Turvakate
• Kasutusjuhend (see dokument)

Figure 1: KERN PCD 6K-4 Precision Laboratory Balance
This image shows the KERN PCD 6K-4 precision laboratory balance. It consists of a square weighing platform with a stainless steel surface, connected by a cable to a separate digital display unit. The display unit features a large digital readout, along with buttons for ON/OFF, MODE/CAL, SET/M, PRINT, and TARE. The display indicates a maximum capacity of 3500g and a readability of 0.01g, though the model is 6K-4 (6000g max). The separate design is ideal for use in specialized environments like glove-bags.

4. Seadistamine

1. Paigutus: Place the weighing platform and display unit on a stable, vibration-free, and level surface. Ensure sufficient space for operation and avoid direct sunlight, drafts, or significant temperature fluctuations.
2. Kokkupanek: Connect the cable from the weighing platform to the designated port on the digital display unit.
3. Nivelleerimine: Use the adjustable foot bolts located on the underside of the weighing platform to level the balance. Observe the integrated spirit level (if present) to ensure precise horizontal alignment.
4. Tuulekaitse: If your model includes a wind protection ring (for Ø 105 mm weighing plates), carefully place it around the weighing platform. This helps stabilize readings in environments with air currents.
5. Toiteühendus: Connect the power adapter to the display unit and then plug it into a suitable power outlet.

5. Kasutusjuhised

5.1 Toide sisse/välja

• To turn the balance ON, vajutage nuppu SISSE/VÄLJA button. The display will show a self-test and then settle at 0.00g.
• To turn the balance VÄLJAS, vajutage ja hoidke all nuppu SISSE/VÄLJA nuppu, kuni ekraan välja lülitub.

5.2 Põhiline kaalumine

1. Ensure the balance is powered on and displays 0.00g.
2. Carefully place the item to be weighed onto the center of the weighing platform.
3. Oodake, kuni ekraan stabiliseerub. Kuvatakse stabiilne kaal.
4. Remove the item from the platform.

5.3 TARE-funktsioon

The TARE function allows you to subtract the weight of a container, so only the net weight of the contents is displayed.

1. Place the empty container onto the weighing platform. The display will show its weight.
2. Vajutage nuppu TARE button. The display will reset to 0.00g.
3. Add the substance to be weighed into the container. The display will show the net weight of the substance.

The balance also features a PRE-TARE function for manual entry of a known container weight. Consult the full manual for detailed instructions on using PRE-TARE, typically accessed via the MODE/CAL or SET/M button in specific modes.

5.4 Unit Selection / Mode

Vajutage nuppu MODE/CAL button to cycle through available weighing units (e.g., grams, kilograms, pounds, ounces) or to enter different operating modes. Refer to the full manual for a list of supported units and mode functions.

5.5 Kalibreerimine

Regular calibration ensures the accuracy of your balance. Calibration should be performed using certified calibration weights.

1. Ensure the balance is stable and free from any load.
2. Vajutage ja hoidke all nuppu MODE/CAL nuppu, kuni ekraanile ilmub "CAL".
3. Follow the on-screen prompts to place the required calibration weight(s) onto the platform.
4. Once calibration is complete, the balance will return to weighing mode.

Note: Specific calibration procedures may vary. Always consult the detailed instructions provided with your balance for precise steps and recommended calibration weights.

5.6 Print Function

If your balance is connected to a compatible printer or data interface, pressing the PRINDI button will send the current weighing data to the connected device.

6. Hooldus

• Puhastamine: Enne puhastamist ühendage toide lahti. Kasutage pehmet lappi.amp cloth with a mild detergent to clean the weighing platform and display unit. Avoid abrasive cleaners or solvents. Ensure no liquid enters the device.
• Hoiustamine: When not in use for extended periods, store the balance in a clean, dry, and stable environment. Use the provided safety cover to protect it from dust.
• Ülevaatus: Regularly inspect the power cable and connections for any signs of damage.

7. Veaotsing

8. Tehnilised andmed

• Mudel: KERN PCD 6K-4
• Kaubamärk: KERN
• Maksimaalne mahutavus: 6000 g (6 kg)
• Loetavus: Typically 0.01 g (Note: Image shows 0.01g for a 3500g model, actual readability for 6000g model may vary slightly, but is generally in this precision range.)
• Kuva tüüp: Digitaalne
• Erifunktsioon: PRE-TARE function
• Soovitatavad kasutusalad: Laboratory/scientific applications
• Toote mõõtmed: 11.02 x 6.5 x 2.95 inches (Weighing platform and display unit combined/approximate)
• Tootja: KERN & SOHN GmbH

9. Garantii ja tugi

For warranty information, technical support, or service inquiries, please contact your KERN dealer or visit the official KERN website. Keep your purchase receipt and product serial number available when contacting support.