Sissejuhatus
The Lenco LS-50WD is a modern turntable designed for playing vinyl records. It features two built-in speakers, allowing for immediate audio playback without external equipment. The turntable supports multiple playback speeds (33, 45, and 78 RPM) to accommodate various record types. For enhanced audio, an RCA output is provided for connection to external speakers or an amplifier. Additionally, a USB port enables the conversion of vinyl records into digital formats for archiving or playback on other devices.
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Lenco LS-50WD turntable. Please read it thoroughly before using the device to ensure proper function and longevity.
Ohutusjuhised
- Enne kasutamist lugege hoolikalt läbi kõik juhised.
- Hoidke see juhend edaspidiseks kasutamiseks alles.
- Tulekahju või elektrilöögi vältimiseks ärge jätke seadet vihma ega niiskuse kätte.
- Veenduge, et toiteadapter ühildub teie kohaliku toiteallikaga.
- Ärge blokeerige ventilatsiooniavasid.
- Asetage seade stabiilsele tasasele pinnale.
- Vältige seadme asetamist soojusallikate või otsese päikesevalguse lähedusse.
- Ühendage seade vooluvõrgust lahti äikesetormi ajal või kui seda ei kasutata pikema aja jooksul.
- Ärge proovige seadet ise hooldada. Jätke kogu hooldus kvalifitseeritud töötajatele.
Pakendi sisu
Veenduge, et pakendis on kõik allpool loetletud esemed:
- Lenco LS-50WD Turntable Unit
- Tolmukate
- 45 RPM adapter
- Alalisvoolu adapter
- Kasutusjuhend (see dokument)
Toode läbiview
Familiarize yourself with the components of your Lenco LS-50WD turntable.
Joonis 1: Esiosa view of the Lenco LS-50WD turntable with the dust cover open, showing the platter, tonearm, and controls.
Joonis 2: Lähivõte view of the tonearm assembly, including the stylus and counterweight adjustment area.
Joonis 3: Rear panel showing the RCA audio output (L/R), USB port, DC 12V power input, and power ON/OFF switch.
Joonis 4: Läbiview of the Lenco LS-50WD highlighting key features: 2 built-in speakers, 33/45/78 RPM speeds, auto-stop function, RCA output, and PC connection via USB.
Seadistamine
- Lahtipakkimine: Eemaldage pöördalus ja kõik lisatarvikud ettevaatlikult pakendist. Hoidke pakend alles edaspidiseks transportimiseks või hoiustamiseks.
- Paigutus: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
- Tolmukatte paigaldamine: Attach the provided dust cover to the hinges at the rear of the turntable. This protects the platter and stylus from dust when not in use.
- Toiteühendus: Connect the DC power adapter to the DC 12V input port on the rear of the turntable (refer to Figure 3). Plug the adapter into a suitable wall outlet.
- Välise kõlari ühendus (valikuline): If you wish to use external speakers, connect an RCA audio cable (not included) from the RCA L/R output ports on the rear of the turntable (refer to Figure 3) to the corresponding audio input on your amptõstukõlarid või aktiivsed kõlarid.
- Vastukaalu reguleerimine: The turntable features an adjustable counterweight. This allows for fine-tuning of the stylus pressure for optimal sound quality and to prevent damage to your records. Consult the specific instructions for your cartridge type for the recommended tracking force. Generally, you will balance the tonearm until it floats freely, then rotate the counterweight to the recommended tracking force.
Kasutusjuhised
- Toide sisse: Flip the power switch on the rear panel to the 'ON' position (refer to Figure 3).
- Kirje paigutus: Place a vinyl record onto the turntable platter. If playing a 7-inch single, place the 45 RPM adapter onto the spindle first.
- Kiiruse valik: Select the appropriate playback speed (33, 45, or 78 RPM) using the speed selector switch, usually located near the platter. Ensure the selected speed matches the record you are playing.
- Alusta taasesitust:
- Tõstke toonarm ettevaatlikult juhtkangi abil üles.
- Liiguta toonarm plaadi soovitud algussoone kohale.
- Langetage toonarm aeglaselt toonkäpa abil. Pliiats puudutab plaati ja taasesitus algab.
- Helitugevuse reguleerimine: Adjust the volume using the volume knob on the turntable or your connected external audio system.
- Automaatne seiskamise funktsioon: The LS-50WD features an auto-stop function that automatically stops the platter rotation when the tonearm reaches the end of a record. This helps prevent unnecessary wear on the stylus and record.
- Taasesituse peatamine:
- Tõstke toonarm klahvistiku hoova abil üles.
- Return the tonearm to its rest position.
- Lower the cueing lever to secure the tonearm.
- USB Recording (Digitization):
- Connect the turntable's USB port (refer to Figure 3) to your computer using a USB cable (not included).
- Install appropriate audio recording software on your computer (e.g., Audacity, available online).
- Follow the software's instructions to select the turntable as the input device and begin recording your vinyl playback.
- Toide välja: When finished, flip the power switch on the rear panel to the 'OFF' position.
Hooldus
- Seadme puhastamine: Pühkige plaadimängija pinda pehme, kuiva ja ebemevaba lapiga. Ärge kasutage abrasiivseid puhastusvahendeid, vaha ega lahusteid.
- Tolmukate: Puhastage tolmukatet pehme lapigaamp cloth. Avoid harsh chemicals that may scratch or cloud the plastic.
- Pliiatsi hooldus: The stylus (needle) is a delicate component. Clean it periodically using a soft brush designed for stylus cleaning, brushing gently from back to front. Replace the stylus when signs of wear are visible (e.g., distorted sound, skipping).
- Arhiveerimishooldus: Keep your records clean and free of dust to prolong their life and the life of your stylus. Store records vertically in their sleeves.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Pole jõudu | Toiteadapter pole ühendatud või pistikupesa on vigane. | Ensure power adapter is securely connected and the outlet is functional. Check the power switch on the rear. |
| Sisseehitatud kõlaritest ei tule heli | Volume too low; tonearm not lowered onto record. | Increase volume. Ensure the tonearm is properly lowered onto a spinning record. |
| No sound from external speakers | RCA cables not connected correctly; external amplifier/speakers off or input not selected. | Check RCA cable connections. Ensure external ampkõlarid on sisse lülitatud ja õigele sisendile seatud. |
| Heli on moonutatud või katkendlik | Dirty record or stylus; incorrect tracking force; turntable not level. | Clean record and stylus. Adjust counterweight for correct tracking force. Ensure turntable is on a level surface. |
| Vale taasesituse kiirus | Valitud vale kiirus. | Verify the speed selector switch matches the record's required RPM (33, 45, or 78). |
Tehnilised andmed
| Kaubamärk | Lenco |
| Mudel | LS-50WD |
| Toote mõõtmed (P x L x K) | 12.44 x 16.22 x 4.65 tolli (31.6 x 41.2 x 11.8 cm) |
| Kauba kaal | 5.5 naela (2.5 kilogrammi) |
| Toiteallikas | DC Adapter, 12 Volts |
| Taasesituse kiirused | 33, 45, 78 p/min |
| Sisseehitatud kõlarid | Jah (2x) |
| Heliväljund | RCA L/R |
| Ühenduvus | USB 2.0 Port (for PC connection/digitization) |
| Materjal | Inseneritööstus, puit |
| Erifunktsioon | Direct-Drive, Auto-Stop |
| Kaasatud komponendid | Dust cover, 45 RPM adapter, DC power adapter |
Märkus. Spetsifikatsioone võidakse ette teatamata muuta.
Garantii ja tugi
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Lenco webveebisait. Hoidke ostutõendit alles garantiinõuete esitamiseks.
If you encounter issues not covered in the troubleshooting section, please contact Lenco customer support for assistance.
