BRESSER Temeo Quadro Temperature Station User Manual

Sissejuhatus

The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.

Ohutusteave

• Enne seadme kasutamist lugege hoolikalt läbi kõik juhised.
• Hoidke see juhend edaspidiseks kasutamiseks alles.
• Ärge jätke seadet äärmuslike temperatuuride, otsese päikesevalguse ega kõrge õhuniiskuse kätte.
• Vältige seadme maha pillamist või tugevate löökide allutamist.
• Ärge proovige seadet ise lahti võtta ega parandada. Pöörduge kvalifitseeritud hoolduspersonali poole.
• Kõrvaldage kasutatud patareid vastutustundlikult vastavalt kohalikele eeskirjadele.

Pakendi sisu

• 1x BRESSER Temeo Quadro Main Display Unit
• 3x Remote Sensors
• 1x Kasutusjuhend (käesolev dokument)

Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.

Toode läbiview

Peamine kuvaseade

Pilt: Esiosa view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.

Pilt: Tagumine view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.

• LCD ekraan: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
• KANALI nupp: Selects which remote sensor's data is displayed or cycles through channels.
• ALARM nupp: Activates/deactivates temperature/humidity alarms.
• MAX/MIN nupp: Kuvab salvestatud maksimaalseid ja minimaalseid väärtusi.
• SET nupp: Enters setup mode for time, date, and alarm settings.
• Akupesa: Located on the rear, for 3x AAA batteries.
• Integreeritud alus: For desktop placement.

Kaugjuhtimisandur

Pilt: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.

• LCD ekraan: Shows its current temperature and humidity.
• Kanali lüliti: Allows selection of channel 1, 2, or 3.
• Akupesa: For 2x AAA batteries.
• Paigaldusava: Seinale kinnitamiseks.

Seadistamine

1. Aku paigaldamine

1. For Remote Sensors:
   • Open the battery compartment cover on the back of each remote sensor.
   • Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
   • Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
   • Sulgege patareipesa kaas.
2. For Main Display Unit:
   • Avage põhiseadme tagaküljel asuv patareipesa kate.
   • Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
   • Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.

2. Andurite sidumine

• After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
• Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
• The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
• If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.

3. paigutus

• Place the main unit indoors in a central location, away from direct sunlight or heat sources.
• Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.

Kasutusjuhised

Viewtemperatuur ja niiskus

• The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
• The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.

MAX/MIN kirjed

• Vajutage nuppu MAX/MIN nuppu üks kord, et kuvada viimasest lähtestamisest alates salvestatud maksimaalne temperatuur ja õhuniiskus.
• Vajutage nuppu MAX/MIN nuppu teist korda, et kuvada salvestatud minimaalne temperatuur ja õhuniiskus.
• MAX/MIN kirjete kustutamiseks vajutage ja hoidke all nuppu MAX/MIN button for approximately 3 seconds while MAX or MIN values are displayed.

Temperatuuriühiku valik (°C/°F)

• Vajutage põhiseadmel nuppu SET nuppu Celsiuse (°C) ja Fahrenheiti (°F) skaala vahel vahetamiseks.

Setting Alarms (if applicable)

• Vajutage nuppu ALARM nuppu alarmi seadistusrežiimi sisenemiseks.
• Kasutage KANAL ja MAX/MIN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
• Vajutage ALARM again to confirm settings and activate the alarm. An alarm icon will appear on the display.
• When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.

Hooldus

• Puhastamine: Pühkige seadet pehme, damp riie. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
• Patarei vahetus: Replace batteries when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
• Hoiustamine: Seadme pikemaajalisel hoiustamisel eemaldage kõik patareid, et vältida leket.

Veaotsing

Tehnilised andmed

Garantii

This BRESSER product comes with a kaheaastane garantii against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.

Toetus

For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER websaidilt uusimad kontaktandmed.

Online resources may include FAQs, additional manuals, and contact forms.