Sissejuhatus
The BWT Aquameter LF (Low Flow) is designed to precisely monitor the volume of water that has passed through your water filter system. This device helps ensure timely filter replacement, maintaining optimal water quality for applications such as espresso machines. It features an LCD display for real-time capacity tracking and is compatible with various BWT water filters, including Bestmax and Besttaste series.
Toode läbiview
Joonis 1: BWT Aquameter LF control unit with LCD display and separate flow sensor, connected by a cable. This image shows the main components of the Aquameter LF system.
Joonis 2: The packaging for the BWT Aquameter LF, indicating its 3/8" connection and NSF certification. The packaging also displays the product number 812136 and GTIN 04250266700169.
Seadistamine ja installimine
- Pakkige komponendid lahti: Carefully remove the BWT Aquameter LF control unit, flow sensor, and connecting cable from the packaging.
- Voolu suuna määramine: The flow sensor has an arrow indicating the direction of water flow. Ensure this aligns with your water line.
- Connect Flow Sensor: Install the 3/8" flow sensor into the water line before your BWT water filter. Use appropriate plumbing fittings to ensure a secure, leak-free connection.
Joonis 3: The BWT Aquameter LF control unit mounted on a wall, connected to a BWT Bestmax water filter installed under a sink. This illustrates a typical installation setup.
- Ühendage juhtseade: Plug the cable from the flow sensor into the designated port on the BWT Aquameter LF control unit.
- Juhtseadme paigaldamine: Mount the control unit in a convenient location using the provided mounting hardware. Ensure the display is easily visible.
Joonis 4: Lähivõte view of the BWT Aquameter LF control unit mounted, showing the LCD display, "PROG." and "RESET" buttons, and the CE mark. The cable connecting to the flow sensor is visible.
- Esialgne programmeerimine:
- Press and hold the "PROG." button to enter programming mode.
- Use the "PROG." button to cycle through settings (e.g., total filter capacity in liters).
- Use the "RESET" button to adjust the values for each setting.
- Confirm settings by pressing "PROG." again or waiting for the unit to exit programming mode automatically.
- Set the filter capacity according to your specific BWT filter model and local water hardness.
Kasutusjuhised
- Monitoring Water Volume: The LCD display continuously shows the remaining filter capacity in liters. As water flows through the filter, the displayed value decreases.
- Filtri asendamise indikaator: When the displayed capacity reaches a low level or zero, it indicates that the water filter needs to be replaced. Refer to your specific BWT filter's documentation for recommended replacement intervals.
- Resetting the Meter: After replacing the water filter, press and hold the "RESET" button for at least 3 seconds to reset the meter to its programmed initial capacity. This action ensures accurate tracking for the new filter.
Hooldus
- Filtri vahetus: Regularly replace your BWT water filter according to the manufacturer's recommendations or when the Aquameter LF indicates zero remaining capacity. This ensures continued water quality and system performance.
- Puhastamine: Wipe the exterior of the Aquameter LF control unit with a soft, damp riie. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
- Patarei vahetus: The Aquameter LF operates on internal batteries. If the display becomes dim or unresponsive, the batteries may need replacement. Consult a qualified technician or BWT support for battery replacement procedures.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Ekraan on tühi või tuhm. | Tühjad või madalad patareid. | Contact BWT support for battery replacement. |
| Capacity not decreasing. | Flow sensor incorrectly installed or faulty. No water flow detected. | Check flow sensor installation, ensuring correct flow direction. Verify water flow through the system. |
| Incorrect capacity reading after filter change. | Meter not reset after filter replacement. | Press and hold the "RESET" button for 3 seconds to reset the meter. |
| Veeleke ühenduskohtades. | Loose fittings or improper sealing. | Ensure all plumbing connections are tight and properly sealed with appropriate thread sealant or tape. |
Tehnilised andmed
- Mudeli number: 812195
- Materjal: Akrüülnitriilbutadieenstüreen (ABS)
- Toote mõõtmed: 2.4" P x 4.8" L x 4.1" K
- Flow Rate (Low Flow): 10–100 liters/hour
- Ühenduse suurus: 3/8"
- Kauba kaal: 7 untsi
- Välise testimise sertifitseerimine: NSF
- Compatible Water Purifier Models: BWT Bestmax, BWT Bestmax PREMIUM, BWT Besttaste
- Globaalne kaubanduse identifitseerimisnumber (GTIN): 04250266700169
Garantii teave
For detailed warranty information regarding your BWT Aquameter LF, please refer to the warranty card included with your product or visit the official BWT webveebisait. Garantiitingimused võivad piirkonniti erineda.
Toetus
If you require further assistance, technical support, or have questions about your BWT Aquameter LF, please contact BWT customer service or visit the official BWT store online.
