1. Sissejuhatus
The Turtle Beach Stealth 350VR gaming headset is engineered to deliver clear, amplified Virtual Reality audio. It features a battery-powered design, Variable Bass Boost, and an ergonomic structure specifically tailored for VR use, providing ample clearance for VR headbands and cables. Equipped with large 50mm speakers, it offers a rich and expansive audio experience. The lightweight build and comfortable fabric-wrapped memory foam ear cushions ensure extended comfort during use. A removable noise-cancelling microphone guarantees crystal-clear communication, complemented by Mic Monitoring, which allows users to hear their own voice to prevent shouting. Convenient on-board audio controls are easily accessible directly on the headset.
Joonis 1: Esiosa view of the Turtle Beach Stealth 350VR Headset.
2. Seadistamine
2.1 Mikrofoni ühendus
To connect the noise-cancelling microphone, firmly insert it into the dedicated jack located on the left ear cup of the headset. Ensure a solid connection for optimal chat clarity.
Figure 2: Close-up of the left ear cup showing the microphone jack.
2.2 Sisse-/väljalülitamine
Locate the power switch on the left ear cup. Slide the switch upwards to power on the headset. A blue LED indicator will illuminate, confirming the headset is active. To power off, slide the switch downwards.
2.3 Peakomplekti laadimine
The Stealth 350VR features an internal rechargeable battery, providing up to 30 hours of amplified VR audio. To charge, connect the included USB charging cable to the charging port on the headset and a compatible USB power source.
2.4 Connecting to a VR Device (e.g., PlayStation VR)
Ensure your VR device (e.g., PSVR) is fully set up and powered on. Connect the Stealth 350VR to the VR device using the included short audio cable. The right-angle connector side of the audio cable should be connected to the VR device's inline port. After connecting, power on your Stealth 350VR headset. Adjust the VR device's volume to maximum, then use the headset's controls for your preferred volume level.
For PlayStation 4 setup: Go to Seaded > Seadmed > Heliseadmed. Määra Sisend- ja väljundseade to the headset connected to the controller. Set Väljund kõrvaklappidesse juurde Kõik heli. Määra Helitugevuse reguleerimine (kõrvaklapid) to maximum. Select Reguleerige mikrofoni taset and follow on-screen instructions to calibrate.
Video 1: Detailed setup and feature overview for the Turtle Beach Stealth 350VR headset, including connection to VR devices.
3. Peakomplekti kasutamine
All primary audio controls are conveniently located on the left ear cup of the headset.
3.1 Mic Mute
To mute or unmute the microphone, slide the dedicated switch on the face of the left ear cup left or right.
3.2 Põhimaht
Adjust the master volume dial to control the overall audio output level of your Stealth 350VR headset.
3.3 Variable Bass Boost
Use the Variable Bass Boost slider to increase or decrease the bass levels, enhancing immersion in your VR experience.
Video 2: Kiire üleminekview of the Turtle Beach Stealth 350VR headset features and controls.
4. Hooldus
To ensure the longevity and optimal performance of your Turtle Beach Stealth 350VR headset, follow these maintenance guidelines:
- Puhastamine: Kõrvaklappide ja peavõru pühkimiseks kasutage pehmet ja kuiva lappi. Vältige tugevate kemikaalide või abrasiivsete materjalide kasutamist.
- Hoiustamine: Hoidke peakomplekti jahedas ja kuivas kohas, eemal otsesest päikesevalgusest ja äärmuslikest temperatuuridest.
- Kaabli hooldus: Handle all cables with care. Avoid sharp bends or excessive pulling, which can damage internal wiring.
- Mikrofon: When not in use, the detachable microphone can be removed and stored separately to prevent damage.
5. Veaotsing
If you encounter issues with your Stealth 350VR headset, consider the following common solutions:
- Heli puudub/madal helitugevus:
- Veenduge, et peakomplekt on sisse lülitatud ja täielikult laetud.
- Kontrollige kõiki kaabliühendusi, et olla kindel.
- Verify that the master volume dial on the headset is turned up.
- Confirm that the audio output settings on your VR device or console are correctly configured (refer to Section 2.4 for PS4 settings).
- Mikrofon ei tööta:
- Ensure the microphone is firmly inserted into its jack.
- Check that the mic mute switch on the headset is in the unmute position.
- Verify microphone input settings on your VR device or console.
- Moonutatud heli:
- Lower the master volume on the headset or your connected device.
- Adjust the Variable Bass Boost to see if it resolves the distortion.
- Ensure no other audio devices are interfering.
6. Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Kõlarid | 50mm Speakers with Neodymium Magnets |
| Sagedusvastus | 20Hz – 20kHz |
| Ear-cup Design | Over-Ear (Closed) |
| Microphone Design | Unidirectional Noise-Cancelling Gaming Microphone |
| Kõrvaklappide Jack | 3.5 mm tungraud |
| Ühenduvustehnoloogia | Juhtmega |
| Juhtimistüüp | Volume Control, Mic Mute, Bass Boost |
| Kaabli funktsioon | Detachable Audio Cables |
| Kauba kaal | 1.1 naela (umbes 0.5 kg) |
| Aku tööiga | Kuni 30 tundi |
| Ühilduvad seadmed | PlayStation VR, PlayStation 4, Oculus Rift, HTC Vive, Gear VR, PC, Xbox (via controller) |
7. Garantii ja tugi
For warranty information, technical support, and additional resources, please visit the official Turtle Beach webveebisaidilt või võtke ühendust nende klienditeenindusega. Hoidke ostutõendit garantiinõuete esitamiseks.
Veebitugi: www.turtlebeach.com/support
