Sissejuhatus
The Gingko Gravity Cube Click Clock GK18PK is a compact and innovative alarm clock designed to display time, date, and temperature. It features a sound-activated LED display, a touch-sensitive snooze function, and a unique gravity-controlled alarm deactivation method. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.
Pakendi sisu
- Gingko Gravity Cube Click Clock GK18PK
- USB-toitekaabel
- Kasutusjuhend (see dokument)
Seadistamine
Seadme toide
The Gravity Cube Click Clock can be powered via the included USB cable. Connect the small end of the USB cable to the DC 5V port on the back of the clock and the larger end to a USB power adapter (not included) or a powered USB port.
The clock also requires 1 Lithium Polymer battery for backup power, which is not included. Ensure the correct battery type is used and installed according to polarity markings.
Pilt: Tagumine view of the Gingko Gravity Cube Click Clock. This image displays the back panel of the clock, highlighting the 'SET', '+', '-', 'Alarm', and 'V/S' buttons, along with the DC 5V power input port at the bottom. The Gingko logo is visible in the center.
Esialgne sisselülitamine
Once connected to power, the LED display will illuminate. The clock will typically default to a 24-hour time format and Celsius temperature. You can adjust these settings in the operating instructions section.
Kasutusjuhised
Display Modes (Time, Date, Temperature)
The clock automatically alternates between displaying the time, date, and temperature. The LED display is sound-activated. To activate the display when it's off, gently tap the surface the clock is on, click your fingers, or clap your hands. The display will automatically switch off after a short period of silence to conserve energy.
Pilt: Esiosa view of the Gingko Gravity Cube Click Clock. The clock, in a pink finish, is shown on a white desk surface, displaying the time '12:43' in bright white LED digits.
Kellaaja ja kuupäeva määramine
- Vajutage ja hoidke all nuppu SET button on the back of the clock until the display starts flashing.
- Kasutage + ja - Tunni muutmiseks vajutage nuppe. SET kinnitamiseks ja järgmise seadistuse juurde liikumiseks.
- Korda minutite, aasta, kuu ja päeva puhul.
- After setting the date, you may be prompted to select 12-hour or 24-hour format, and Celsius or Fahrenheit for temperature. Use + ja - valimiseks ja SET kinnitamiseks.
Alarmi seadistamine
- Vajutage nuppu Alarm button on the back of the clock. The alarm time will appear, and the alarm icon will flash.
- Vajutage ja hoidke all nuppu Alarm nuppu, kuni äratusaeg hakkab vilkuma.
- Kasutage + ja - äratuse tundide muutmiseks vajutage nuppe. Alarm kinnitamiseks ja minutite juurde liikumiseks.
- Reguleerige minuteid, kasutades + ja -. Vajutage Alarm kinnitamiseks.
- The display will then show 'ON' or 'OFF'. Use + or - to toggle the alarm on or off. Press Alarm salvestamiseks ja väljumiseks.
Edasilükkamise funktsioon
When the alarm sounds, gently touch the top surface of the clock to activate the snooze function. The alarm will pause for a set period (typically 5 minutes) and then sound again.
Alarmi väljalülitamine
To completely turn off the alarm when it is sounding (not just snooze), simply turn the clock over onto any of its other sides. This action will deactivate the alarm until the next set alarm time.
Hooldus
Puhastamine
To clean the clock, use a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the rubberized finish and display.
Patarei vahetus
If you are using a backup battery, ensure it is replaced with the correct type (1 Lithium Polymer battery) when depleted. Incorrect battery types or improper installation can lead to malfunction or damage. Refer to the battery compartment for specific instructions and polarity.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Ekraan on tuhm või loetamatu. | Insufficient power; ambient light too bright; display brightness setting. | Ensure the clock is connected to a stable power source. Move the clock to a less brightly lit area. Check if there's a brightness setting (refer to manufacturer's website if not in manual). |
| Clock not turning on. | No power; faulty cable/adapter. | Verify USB cable is securely connected to both the clock and a working power source. Try a different USB cable or power adapter. |
| Alarm not sounding or turning off incorrectly. | Alarm not set; volume too low; clock orientation issue. | Ensure the alarm is set and activated (check for alarm icon on display). Verify the clock is placed on a flat, stable surface for proper gravity detection. |
| Clock beeps or faults unexpectedly. | Low battery (if using backup); internal error. | Replace the Lithium Polymer backup battery if installed. Disconnect and reconnect power to reset the device. |
| Power adapter is incompatible (e.g., UK plug). | Regional power adapter provided. | The clock uses a standard USB power cable. You will need a compatible USB power adapter for your region (e.g., a US USB wall adapter for use in the United States). |
Tehnilised andmed
- Mudeli number: GK18PK
- Toote mõõtmed: 3" L x 3" K (7.62 cm x 7.62 cm)
- Kuva tüüp: Digitaalne LED
- Toiteallikas: Corded Electric (DC 5V via USB)
- Varu aku: 1 Lithium Polymer battery (not included)
- Eriomadused: Alarm, Sound-activated display, Gravity-controlled alarm off, Touch-sensitive snooze, Time/Date/Temperature display
- Tootja: Gingko
- Sise-/välikasutus: Siseruumides
