Intermatic ST01 24-Hour In-Wall Timer Instruction Manual

1. Sissejuhatus

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Pilt 1: esikülg view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.

2. Ohutusalane teave

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.

• Ärge paigaldage märgade kätega.
• Do not use in locations where it may be exposed to water or extreme humidity.
• Veenduge, et kõik juhtmestikuühendused on kindlad ja vastavad kohalikele elektrieeskirjadele.
• This device is rated for 120-277V, 15A, 1800W. Do not exceed these ratings.
• Ainult siseruumides kasutamiseks.

3. Pakendi sisu

Enne paigaldamise alustamist veenduge, et kõik komponendid on olemas:

• Intermatic ST01 24-Hour In-Wall Timer (1 unit)
• Kinnituskruvid (2 tk)
• Wire Nuts (3 units)
• Kasutusjuhend (see dokument)

4. Paigaldamine

Ohutu ja õige paigaldamise tagamiseks järgige neid samme:

1. Lülitage toide välja: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltage testija.
2. Eemalda olemasolev lüliti: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
3. Ühendage taimer: The ST01 timer typically has three wires:
   • Black (Line): Ühendage kaitselülitist tuleva kuumajuhtmega.
   • Red (Load): Connect to the wire going to the light fixture or appliance.
   • Roheline (maa): Connect to the bare copper or green ground wire in the wall box.
   Use wire nuts to secure all connections. Ensure connections are tight and no bare wire is exposed.
4. Taimeri paigaldamine: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
5. Paigaldage seinaplaat: Attach a standard wall plate (not included) over the timer.
6. Toite taastamine: Lülitage kaitselüliti või kaitsmekarbi kaudu toide uuesti sisse.

Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.

5. Esialgne seadistamine ja programmeerimine

Esmakordsel sisselülitamisel või pärast toite väljalülitamisttage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.

1. Määra praegune aeg:
   • Vajutage nuppu KELL nuppu.
   • Kasutage TUND ja MINUT buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
   • Vajutage KELL uuesti salvestamiseks ja väljumiseks.
2. Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
   • Vajutage nuppu PROG nuppu. Ekraanile kuvatakse "1 ON".
   • Kasutage TUND ja MINUT nuppe, et määrata programmi 1 jaoks soovitud sisselülitusaeg.
   • Vajutage PROG uuesti. Ekraanile kuvatakse "1 OFF".
   • Kasutage TUND ja MINUT nuppe, et määrata programmi 1 jaoks soovitud väljalülitusaeg.
   • Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
   • Vajutage KELL to save all programs and return to normal operation.

Refer to the timer's LCD display for visual cues during programming.

6. Taimeri kasutamine

Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:

• Käsitsi SISSE/VÄLJA: Vajutage nuppu MANUAAL button to cycle through ON, OFF, and AUTO modes.
  • PEAL: Ühendatud seade jääb sisse lülitatuks, tühistades kõik programmid.
  • VÄLJAS: Ühendatud seade jääb VÄLJA LÜLITATUD, tühistades kõik programmid.
  • AUTOMAATNE: The timer will operate according to the programmed schedules. This is the default operating mode.
• Random Mode (if available): Some models may include a random mode for security. Consult the specific model's features if this is desired.

7. Hooldus

The Intermatic ST01 timer requires minimal maintenance:

• Puhastamine: Wipe the timer's surface with a soft, damp riie. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
• Aku: The internal CR2 lithium battery maintains time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display becomes dim or settings are lost frequently, professional servicing may be required.
• Ülevaatus: Periodically inspect the timer and wall plate for any signs of damage or loose connections.

8. Veaotsing

9. Tehnilised andmed

• Mudel: ST01
• Tüüp: 24-Hour In-Wall Digital Timer
• Voltage: 120–277 V
• Amptõus: 15 A
• Võimsus: 1800 W
• Poolakad: 1
• Toimimine: ON/OFF, Digital, LCD Display
• Aja seadistus: 12-tunnine formaat
• Aku: CR2 Lithium (for memory backup)
• Töötemperatuur: 32 °F kuni 104 °F (0 °C kuni 40 °C)
• Paigaldamine: Paigaldus
• Mõõdud (üldine): 2.75" H x 1.75" W x 1.46" D (70mm H x 44mm W x 37mm D)
• Värv: Valge
• Materjal: Metallist
• Sertifikaadid: CSA sertifitseeritud
• Ühilduvus: Incandescent, Fluorescent lighting
• Kauba kaal: 8 untsi (umbes 227 grammi)

10. Garantii ja tugi

For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

Intermatic klienditeenindus:

• Websait: www.intermatic.com
• Refer to the official Intermatic webKõige ajakohasema kontaktteabe ja garantiitingimuste saamiseks külastage veebisaiti.