Logi sisseTag UTRIX-16 PDF-temperatuuri andmelogeri kasutusjuhend

1. Sissejuhatus

LogiTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. Ohutusalane teave

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Ärge proovige seadet avada ega muuta, kuna see tühistab garantii ja võib seadet kahjustada.
• Kõrvaldage akud vastavalt kohalikele eeskirjadele.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. Pakendi sisu

Veenduge, et pakendis on kõik esemed olemas:

• Logi sisseTag UTRIX-16 PDF Temperature Data Logger
• Kasutusjuhend (see dokument)

4. Seade üleview

The UTRIX-16 features a compact design with clear indicators and control buttons.

Joonis 1: Esiosa view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• STOP nupp: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

Joonis 2: LogiTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. Seadistamine

5.1 Esialgne konfiguratsioon

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag websaidile.

1. Download and install the LogTag Analüsaatori tarkvara alates Logi sisseTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


Joonis 3: LogiTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. LogiTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 Teave aku kohta

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. Operatsioon

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. Vajutage ja hoidke all nuppu START/Märgi button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. Vajutage ja hoidke all nuppu STOP button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• Vajutage lühidalt nuppu START/Märgi button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. The device will appear as a removable drive.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag Analüsaatori tarkvara.

8. Hooldus

8.1 Puhastamine

Pühkige seade pehme lapiga puhtaksamp riie. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.

8.2 Aku vahetamine

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. Veaotsing

10. Tehnilised andmed

11. Garantii ja tugi

Logi sisseTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webveebisaidilt või võtke ühendust kohaliku edasimüüjaga. Hoidke ostutšekk ostutõendina alles.

Official LogTag Websait: www.logtag- recorders.com