SDC CB401-AU suhtleva vanni vajutuslüliti kasutusjuhend

Toode läbiview

The SDC CB401-AU is a communicating bath push switch designed for secure access control in shared bathroom environments. This stainless steel switch is compatible with Emlock, Selectric, Electra, and Hi-Tower locking systems. It ensures that both doors of a communicating bathroom must be closed for the lock to engage, enhancing privacy and security. A visual indicator light confirms the locked status.

SDC CB401-AU Communicating Bath Push Switch with red button and text 'BATHROOM LOCK BOTH DOORS MUST BE CLOSED TO LOCK PUSH TO LOCK OR UNLOCK LIGHT ON DOOR LOCKED'

Figure 1: SDC CB401-AU Communicating Bath Push Switch. This image displays the front of the stainless steel switch, featuring a prominent red square push button. Above the button, text reads "BATHROOM LOCK" and "BOTH DOORS MUST BE CLOSED TO LOCK". Below the button, it states "PUSH TO LOCK OR UNLOCK" and "LIGHT ON DOOR LOCKED". The SDC logo is visible at the top.

Seadistamine ja installimine

This section provides general guidelines for the installation of the CB401-AU switch. Professional installation is recommended to ensure proper functionality and compliance with local electrical codes.

Paigalduseelne kontroll-loend:

Verify compatibility with your existing Emlock, Selectric, Electra, or Hi-Tower locking system.
Ensure all necessary wiring and power sources are available and meet specifications.
Confirm the mounting location inside the shared bathroom is suitable and accessible.
Gather required tools (e.g., screwdriver, wire strippers, drill).

Paigaldusjuhised:

Lülitage kaitselüliti paigalduspiirkonna toide välja.
Carefully remove the existing switch plate, if applicable.
Connect the wiring from the locking system to the appropriate terminals on the CB401-AU switch. Refer to the wiring diagram provided with your specific locking system for correct connections.
Mount the switch securely to the wall box using the provided screws.
Kinnitage esiplaat.
Restore power and test the functionality.

Tähtis: This switch requires both communicating bathroom doors to be closed for the lock to engage. Ensure the associated door sensors and wiring are correctly installed and functioning.

Kasutusjuhised

The SDC CB401-AU switch provides simple operation for securing a shared bathroom.

Locking the Bathroom:

Ensure both communicating bathroom doors are fully closed.
Press the red push button on the CB401-AU switch.
The integrated light on the CB401-AU switch will illuminate, indicating that the doors are locked.
Verify that both doors are securely locked from the outside.

Unlocking the Bathroom:

Press the red push button on the CB401-AU switch again.
The integrated light will turn off, indicating that the doors are unlocked.
Verify that both doors can be opened.

Märkus. If the light does not illuminate when attempting to lock, ensure both doors are completely closed and the system is receiving power.

Hooldus

The SDC CB401-AU switch is designed for durability and requires minimal maintenance.

Puhastamine: Pühkige roostevabast terasest pinda pehme lapigaamp lapiga. Vältige abrasiivseid puhastusvahendeid või lahusteid, mis võivad kahjustada viimistlust või sisemisi komponente.
Ülevaatus: Kontrollige lülitit regulaarselt füüsiliste kahjustuste, lahtiste ühenduste või ebatavalise töö tunnuste suhtes.
Funktsionaalsuse test: Regularly test the locking and unlocking function to ensure proper operation.

Do not attempt to disassemble the switch. Refer all internal repairs to qualified service personnel.

Veaotsing

Probleem	Võimalik põhjus	Lahendus
Switch does not lock doors.	Doors not fully closed. Süsteemil pole toidet. Juhtmete probleem. Faulty lock mechanism.	Ensure both doors are completely closed. Kontrollige kaitselülitit ja toiteallikat. Verify all wiring connections are secure (consult professional). Inspect the associated Emlock/bolt lock for proper function.
Light does not illuminate when locked.	Light bulb failure (if applicable). Wiring issue to the indicator light. System not fully engaged.	Contact SDC support for replacement or service. Check wiring connections (consult professional). Ensure doors are fully closed and lock mechanism is engaged.
Lüliti tundub lõtv või loksuv.	Kinnituskruvid on lahti. Vale paigaldus.	Gently tighten mounting screws. Do not overtighten. If issue persists, professional re-installation may be required.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact SDC customer support.

Tehnilised andmed

Funktsioon	Detail
Mudeli number	CB401-AU
Toote mõõtmed	2 x 3 x 5 tolli
Kauba kaal	4.8 untsi
Materjal	Roostevaba teras
Töörežiim	SEES-PUUDUB-VÄLJAS
Paigaldustüüp	Seinakinnitus
Täiturmehhanismi tüüp	Vajutusnupp
Rahvusvaheline kaitse hinnang	IP00
Kontrollimeetod	Rakendus (Note: This specification from source data may refer to the overall system, not the switch itself. The switch is a physical push button.)
Ühenduvusprotokoll	WiFi (Note: This specification from source data may refer to the overall system, not the switch itself. The switch is a physical push button.)
Ühilduvad süsteemid	Emlock, Selectric, Electra, Hi-Tower

Märkus. Spetsifikatsioone võidakse ette teatamata muuta.

Garantii ja tugi

Garantii teave:

Specific warranty details for the SDC CB401-AU switch are typically provided with the product packaging or can be obtained directly from SDC. Generally, SDC products come with a limited warranty covering defects in materials and workmanship under normal use.

Garantiinõuete esitamiseks säilitage ostutõend.

Klienditugi:

For technical assistance, troubleshooting, or warranty inquiries, please contact SDC customer support. Contact information can usually be found on the SDC official webveebisaidil või toote dokumentatsioonis.

When contacting support, please have your product model number (CB401-AU) and purchase date available.

	SDC ligipääsu- ja väljapääsukontrolli süsteemide projekteerimisteenused SDC projekteeritud süsteemide projekteerimisteenused pakuvad terviklikke lahendusi mitme ukse ligipääsu ja väljumise kontrollimiseks, mis hõlmavad UR-seeria kontrollereid, elektroonilisi lukke, elektrilisi vasturauasid ja detailseid süsteemi ühendusskeeme erinevate rakenduste jaoks.
	SDC CB Series Communicating Bathroom Switch Installation Instructions Detailed installation instructions for SDC CB Series Communicating Bathroom Switches, including CB400-A, CB400-B, and CB700 models. Covers specifications, wiring, and assembly procedures for door access control.
	SDC 352 kitsa joone EMLocki paigaldusjuhised Põhjalik paigaldusjuhend kitsajoonelise elektromagnetluku SDC 352 jaoks. Siit saate teada, kuidas seda ligipääsukontrolli riistvara õigesti paigaldada ja ühendada 12 V või 24 V süsteemide jaoks.
	SDC 482A6RPH/484A6RPH HDPE ADA nupulüliti paigaldusjuhend Paigaldusjuhised SDC 482A6RPH ja 484A6RPH HDPE ümarate nupulülitite jaoks. Nendel ADA-nõuetele vastavatel ukseavamisnuppudel on sinine esikülg valge tekstiga „AVAMISEKS VAJUTA“ ning need on loodud hõlpsaks paigaldamiseks erinevate elektrikilpidega.
	SDC 432KLDUR Lockdown Push Switch Installation Instructions Detailed installation instructions for the SDC 432KLDUR Lockdown Push Switch, covering operation, specifications, wiring diagrams, and UL 294 performance ratings. Includes contact information for SDC Security Door Controls.
	SDC 410/420 seeria lülitilüliti paigaldusjuhised SDC 410/420 seeria lülitite paigaldusjuhend, mis sisaldab turvaliste juurdepääsukontrollisüsteemide elektrilisi spetsifikatsioone, ühendusskeeme ja toote omadusi.

SDC CB401-AU