1. Sissejuhatus ja toote ülevaadeview
This manual provides essential information for the safe and efficient use of your Paulmann 28325 LED Diamond Quadro lamp. This product is a 3-watt LED lamp designed for 12-volt systems, featuring a GU5.3 base and emitting a warm white light at 2700 Kelvin. Its unique crystal reflector design provides directed illumination.
Image 1.1: The Paulmann 28325 LED Diamond Quadro GU5.3 lamp.
2. Ohutusjuhised
Enne paigaldamist või kasutamist lugege palun läbi kõik ohutusjuhised ja mõistke neid.amp. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Elektriohutus: Enne paigaldamist, eemaldamist või hooldamist ühendage alati seade vooluvõrgust lahti.amp.
- Voltage Ühilduvus: See lamp operates on a 12-voldine alalisvool power supply. Do not connect it to a 230-volt AC mains supply without a suitable transformer.
- Mittehämardatav: See LED lamp is ei ole hämardatav. Do not use it with dimmer switches, as this can damage the lamp ja tühistada garantii.
- IP20 reiting: Lamp has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Use only in dry, indoor environments.
- Temperatuur: Tagada l ümber piisav ventilatsioonamp ülekuumenemise vältimiseks. Ärge katke pliidiplaati kinni.amp.
- Lahtivõtmine: Ärge proovige seadet lahti võtta, muuta ega parandada.amp. Sees ei ole kasutaja poolt hooldatavaid osi.
- Kõrvaldamine: Visake l äraamp vastavalt kohalikele elektroonikajäätmete eeskirjadele.
3. Seadistamine ja installimine
Follow these steps to properly install your Paulmann 28325 LED Diamond Quadro lamp:
- Toite katkestamine: Ensure the power supply to the lighting fixture is completely switched off at the main circuit breaker before beginning installation.
- Tuvastage sokkel: Verify that your fixture has a compatible GU5.3 socket. The GU5.3 base features two pins spaced 5.3mm apart.
- Sisestage Lamp: Carefully align the two pins of the LED lamp with the holes in the GU5.3 socket. Gently push the lamp pesasse, kuni see on kindlalt paigas. Ärge suruge l-i jõugaamp.
- Toiteallikas: Ensure the fixture is connected to a stable 12-volt DC power supply. If replacing a halogen lamp, ensure the existing transformer is compatible with LED loads.
- Toite taastamine: Kui lamp is securely installed, restore power to the fixture at the main circuit breaker.
Image 3.1: Close-up of the GU5.3 LED lamp, showing the base pins.
Image 3.2: Diagram showing different lamp base types, including GU5.3 (12V section).
4. Kasutusjuhised
Operating the Paulmann 28325 LED Diamond Quadro lamp on otsekohene:
- Sisse/välja lülitamine: Use the standard wall switch or fixture switch to turn the lamp sisse või välja.
- Valguse väljund: Lamp provides a directed, warm white light (2700K) suitable for accent lighting or general illumination in appropriate fixtures.
- Mittehämardatav: As stated previously, this lamp is not designed for dimming. Attempting to dim it may cause flickering, damage, or premature failure.
5. Hooldus
The Paulmann 28325 LED Diamond Quadro lamp requires minimal maintenance due to its long lifespan and durable design.
- Puhastamine: L-i puhastamiseksamp, ensure the power is off and the lamp is cool. Gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the lampviimistlus või sisemised komponendid.
- Lamp Asendamine: Lamp has an average lifespan of 15,000 hours. When it reaches the end of its life, replace it with a new Paulmann 28325 LED Diamond Quadro lamp or a compatible GU5.3 12V LED lamp.
- Kasutaja poolt hooldatavaid osi pole: Lamp contains no user-serviceable parts. Do not attempt to open or repair it.
6. Veaotsing
If you encounter issues with your Paulmann 28325 LED Diamond Quadro lamp, vaadake järgmist tõrkeotsingu juhendit:
- Lamp Does Not Light Up:
- Ensure the power supply to the fixture is on.
- Kontrollige, kas lamp is correctly and securely seated in the GU5.3 socket.
- Verify that the power supply is providing 12 volts DC. An incompatible or faulty transformer can prevent the lamp töötamisest.
- Kontrollige lamp for any visible damage. If damaged, replace the lamp.
- Lamp Virvendus:
- Kinnitage, et lamp is not connected to a dimmer switch. This lamp ei ole hämardatav.
- Check the 12V DC power supply for stability. Fluctuations in voltage can cause flickering.
- Ensure the transformer is compatible with LED loads. Some older transformers designed for halogen lamps may not work correctly with LEDs.
- Light Output is Weak or Incorrect Color:
- Kontrollige lamp specifications match your requirements (e.g., 2700K warm white).
- Veenduge, et lamp is receiving the correct 12V DC voltage. Under-voltage can reduce light output.
Kui need sammud probleemi ei lahenda, võtke ühendust Paulmanni klienditoega.
7. Tehnilised andmed
Detailed technical specifications for the Paulmann 28325 LED Diamond Quadro lamp:
| Funktsioon | Spetsifikatsioon |
|---|---|
| Kaubamärk | Paulman |
| Mudeli number | 283.25 |
| Lamp Tüüp | LED |
| Aluse tüüp | GU5.3 |
| Voltage | 12 volti |
| Wattage | 3 vatti |
| Valgusvoog | 250 luumenit |
| Värvi temperatuur | 2700 kelvinit (soe valge) |
| Värviedastusindeks (CRI) | 80 |
| Kiirnurk | 36 kraadi |
| Eluiga | 15,000 tundi |
| Mõõdud (P x L x K) | 3.7 x 3.7 x 5 cm |
| Läbimõõt | 37 millimeetrit |
| Pikkus | 50 millimeetrit |
| IP reiting | IP20 |
| Hämardatav | Ei |
| Energiatõhususe klass | G |
| Energiatarbimine | 3 kWh/1000h |
| Materjal | Klaas |
Image 7.1: EU Energy Label for Paulmann 28325.
Image 7.2: Product data sheet with detailed specifications.
Täpsema tooteteabe saamiseks vaadake EPREL-i andmebaasi: https://eprel.ec.europa.eu/qr/860106
8. Garantii ja tugi
Paulmann products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official Paulmann websaidil või võtke ühendust oma edasimüüjaga.
Hoidke ostutšekk ostutõendina alles võimalike garantiinõuete korral.
