Sissejuhatus
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Pakendi sisu
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- Skänneri alus
- (USB) Connection Cable (sold separately or included depending on package)
- Dokumentatsioon (käesolev juhend)
Note: The connection cable is required for operation and may be sold separately.
Seadistamine
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- Skanneri lahtipakkimine: Carefully remove the scanner and its stand from the packaging.
- Pange alus kokku: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- Ühendage kaabel: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- Toide sisse: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- Draiveri installimine (vajadusel): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
Kasutusjuhised
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
Käeshoitav skaneerimine
- Pick Up the Scanner: Remove the scanner from its stand.
- Sihtimine ja skannimine: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- Kinnita skannimine: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- Kohtobjekt: Position the barcode of the item in front of the scanner's window while it is in its stand.
- Automaatne tuvastamine: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- Kinnita skannimine: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
Hooldus
Nõuetekohane hooldus tagab teie skänneri pikaealisuse ja optimaalse jõudluse.
- Puhastamine: Kasutage kergelt pehmet ebemevaba lappi dampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- Hoiustamine: Kui skannerit ei kasutata, hoidke seda puhtas ja kuivas kohas, eemal otsesest päikesevalgusest ja äärmuslikest temperatuuridest.
- Kaabli hooldus: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Veaotsing
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Skanner ei lülitu sisse. | USB-kaabel pole ühendatud või on vigane. | Veenduge, et USB-kaabel on nii skanneri kui ka arvutiga kindlalt ühendatud. Proovige mõnda teist USB-porti või -kaablit. |
| Skanner ei loe vöötkoode. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| Skannitud andmed kuvatakse valesti. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| Scanner beeps but no data is transmitted. | Application not in focus or incorrect interface mode. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic websaidile.
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Mudeli number | HD3130-BK |
| Skänneri tüüp | 1D vöötkoodi skanner |
| Skaneerimise kiirus | 270 skannimist sekundis |
| Ühenduvustehnoloogia | USB kaabel |
| Toiteallikas | Juhtmega elektriline (USB kaudu) |
| Ühilduvad seadmed | Lauaarvuti, sülearvuti |
| Kauba kaal | 1.28 naela (umbes 0.58 kg) |
| Toote mõõtmed | 7.5 x 8.8 x 4.1 tolli (umbes 19.05 x 22.35 x 10.41 cm) |
| Tootja | Datalogic |
| Globaalne kaubanduse identifitseerimisnumber (GTIN) | 05054629213858 |
Garantii ja tugi
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic websaidile.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
Interneti-ressursid: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Websaidile.
