Sissejuhatus
Thank you for choosing the ANSMANN Powerline 5 Pro Charger. This advanced microprocessor-controlled charger is designed for NiMH/NiCd rechargeable batteries, offering multiple charging programs and comprehensive safety features. Please read this manual carefully before using the device to ensure safe and optimal performance.
Ohutusjuhised
- Use the charger only for NiMH/NiCd rechargeable batteries. Do not attempt to charge primary (non-rechargeable) batteries.
- Ärge jätke laadijat vihma ega niiskuse kätte.
- Ärge laadijat lahti võtke ega muutke. Jätke kogu hooldus kvalifitseeritud personalile.
- Tagada laadimise ajal korralik ventilatsioon.
- Hoida lastele kättesaamatus kohas.
- Vältige aku kontaktide lühistamist.
- Eemaldage laadija vooluvõrgust, kui seda ei kasutata.
Toode läbiview
The ANSMANN Powerline 5 Pro is a versatile battery charger featuring an LCD display and individual charging slots. It supports various battery sizes and offers multiple operational modes.
Joonis 1: Esiosa view of the ANSMANN Powerline 5 Pro Charger, showing the LCD display, control buttons (Current, Display, Mode), and four charging slots for cylindrical batteries, plus a dedicated slot for a 9V E-block battery.
Peamised omadused:
- Mitmekülgne rakendus: Charges 1-4 NiMH/NiCd batteries of sizes Micro AAA, Mignon AA, Baby C, Mono D, and one 9V E-block battery.
- Intelligentne laadimistehnoloogia: Four charging programs (Charge, Discharge, Refresh, Test) individually adjustable per charging station.
- Kõrge ohutus: Features reverse polarity protection, short circuit protection, overcharge protection, and automatic shut-off.
- Easy-to-read Display: Large illuminated LCD shows capacity, voltage, charging/discharging current, and charging time for each slot.
- Mugav kasutamine: Includes wide-range power supply for worldwide use and a 12V car adapter.
Pakendi sisu
Paki avamisel veenduge, et kõik komponendid on olemas ja kahjustamata:
- ANSMANN Powerline 5 Pro Charger Unit
- AC Power Adapter (Wide-range)
- 12V auto adapter
- Kasutusjuhend (see dokument)
Figure 2: The Powerline 5 Pro charger shown with its included accessories: the AC power adapter and the 12V car adapter.
Seadistamine
Toiteallika ühendamine:
- Locate the DC 12V 1.5A input port on the rear of the charger.
- Connect the provided AC power adapter or 12V car adapter to this input port.
- Plug the other end of the AC power adapter into a suitable wall outlet, or the car adapter into your vehicle's 12V socket.
- The charger's LCD display will illuminate, indicating it is powered on and ready for use.
Joonis 3: Tagumine view of the Powerline 5 Pro charger highlighting the 12V 1.5A DC input port for connecting the power adapter.
Kasutusjuhised
Patareide sisestamine:
The charger supports various battery sizes. Ensure correct polarity when inserting batteries into the charging slots. The 9V E-block battery has a dedicated slot.
Figure 4: Illustration showing the various battery types suitable for the Powerline 5 Pro charger, including Micro AAA, Mignon AA, Baby C, Mono D, and 9V E-Block.
Understanding the Display and Controls:
The LCD display provides real-time information for each charging slot. The three buttons (Current, Display, Mode) allow you to control the charging process.
- Current Button: Adjusts the charging/discharging current.
- Kuvanupp: Toggles through different display parameters (e.g., voltage, capacity, time).
- Režiimi nupp: Selects the desired operating program (Charge, Discharge, Refresh, Test).
Figure 5: The Powerline 5 Pro charger with batteries inserted, demonstrating the individual monitoring and automatic shutdown features. The LCD shows charging status.
Charging Programs:
Each charging slot can operate independently with its own program.
- Tasu: Standard charging mode. Insert battery, select desired current with "Current" button, then press "Mode" to start. The charger automatically detects full charge and switches to trickle charge.
- Tühjenemine: Discharges the battery before recharging it. Useful for reducing memory effect in NiCd batteries. Select "Discharge" mode with "Mode" button, then set discharge current with "Current" button. After discharge, the charger will automatically begin charging.
- Värskenda: Repeatedly discharges and charges the battery to optimize its capacity and rejuvenate older batteries. This process can take several hours or even days depending on battery condition. Select "Refresh" mode with "Mode" button.
- Test: Charges the battery fully, then discharges it to measure its actual capacity, and finally recharges it. This provides an accurate reading of the battery's health. Select "Test" mode with "Mode" button.
To select a program for a specific slot, first select the slot by pressing the "Display" button until the desired slot is highlighted, then use the "Mode" button to cycle through programs. Use the "Current" button to adjust current settings if applicable.
Hooldus
- Clean the charger regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the charging contacts are free of dust and debris for optimal connection.
- Kui laadijat ei kasutata, hoidke seda jahedas ja kuivas kohas.
- Vältige laadija maha kukkumist või tugevate löökide saamist.
Veaotsing
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Laadija ei lülitu sisse. | Puudub toiteallikas; vigane adapter; lahtine ühendus. | Check power outlet; ensure adapter is securely connected to charger and wall/car socket; try a different outlet. |
| Battery not charging (display shows "ERR"). | Incorrect battery type (non-rechargeable); faulty battery; incorrect polarity; poor contact. | Ensure battery is NiMH/NiCd; try a different battery; reinsert battery with correct polarity; clean battery and charger contacts. |
| Charging process takes too long. | High capacity battery; low charging current selected; battery in "Refresh" or "Test" mode. | This is normal for high capacity batteries; increase charging current if possible; "Refresh" and "Test" modes are designed to take longer. |
| Ekraan on tuhm või virvendab. | Ebastabiilne toiteallikas. | Ensure stable power source; try a different outlet or adapter. |
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Mudeli number | 1001-0018 |
| Ühilduvad akutüübid | NiMH / NiCd (Micro AAA, Mignon AA, Baby C, Mono D, 9V E-block) |
| Sisend Voltage | 12V DC, 1.5A (via included AC adapter or car adapter) |
| Charging Programs | Charge, Discharge, Refresh, Test |
| Ekraan | LCD taustvalgustusega |
| Ohutusfunktsioonid | Reverse polarity protection, short circuit protection, overcharge protection, automatic shut-off |
| Toote mõõtmed | 5.59 x 6.67 x 1.56 tolli (14.2 x 17.0 x 3.96 cm) |
| Kauba kaal | 1.21 naela (0.55 kg) |
| Tootja | ANSMANN |
Figure 6: Dimensions of the Powerline 5 Pro charger, indicating a width of 17.0 cm and a height of 14.2 cm.
Garantii ja tugi
ANSMANN products are manufactured with high quality standards. For warranty information and technical support, please refer to the official ANSMANN webveebisaidilt või võtke otse ühendust nende klienditeenindusega. Hoidke ostutšekk ostutõendina alles.
Lisateabe saamiseks võite külastada Ansmann Store on Amazon.
