Prime TNOREM02

Prime TNOREM02 välistingimustes kasutatav kaugjuhtimispult kahe pistikupesa ja juhtmevaba saatjaga, kasutusjuhend

Model: TNOREM02

Sissejuhatus

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Ohutusteave

Enne toote kasutamist lugege läbi kõik ohutusjuhised ja mõistke neid. Nende juhiste eiramine võib põhjustada elektrilöögi, tulekahju või tõsiseid vigastusi.

Pakendi sisu

Veenduge, et pakendis on kõik esemed olemas:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Toote omadused

Close-up of Prime TNOREM02 Receiver Outlets

Pilt: Lähivõte view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Seadistamine

  1. Vali asukoht: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Ühendage vastuvõtja: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Ühendage seadmed: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattage of connected devices does not exceed 1875 Watts.
  4. Prepare Transmitter: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Kasutusjuhised

Using the Prime TNOREM02 is straightforward:

Hooldus

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Asetage patareipesa kate kindlalt tagasi.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Veaotsing

ProbleemVõimalik põhjusLahendus
Seadmed ei lülitu sisse/välja.
  • Transmitter battery is dead or incorrectly installed.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Ülekoormuskaitse on rakendunud.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Vähendatud traadita leviala.
  • Takistused saatja ja vastuvõtja vahel.
  • Saatja aku on nõrk.
  • Teiste traadita seadmete tekitatud häired.
  • Takistuste minimeerimiseks paigutage vastuvõtja või saatja ümber.
  • Vahetage saatja patarei välja.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Sisekomponendi rike.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Tehnilised andmed

FunktsioonDetail
Mudeli numberTNOREM02
KaubamärkPrime
Turustusvõimaluste arv2 (3-prong grounded)
Traadi tüüpSJTW 14/3 Gauge
Pistiku tüüpRight Angle, Grounded
KasutamineÕues
Max Watts1875 vatti
Max Amps15 Amps
Max voltid125 volti
Maksimaalne hobujõud1 / 3 HP
Wireless RangeKuni 80 jalga
Saatja akuCR2032 3V Button-Cell
Toote mõõtmed8 x 6.2 x 2.1 tolli (ligikaudne)
Kauba kaal0.01 ounces (for remote control)
ÜhenduvustehnoloogiaBluetooth
SertifikaadidNot explicitly detailed, but designed for outdoor electrical use.

Garantii ja tugi

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime websaidil või võtke ühendust nende klienditoe kanalitega.

Seotud dokumendid - TNOREM02

Preview PRIME SmartOutlets + kaugjuhtimispuldi kasutusjuhend ja regulatiivne teave
PRIME SmartOutlets + kaugjuhtimispuldi põhjalik juhend, mis hõlmab seadistamist, uuesti sünkroonimist, garantiid ja FCC/IC regulatsioonide järgimist. Siit saate teada, kuidas oma nutika kodu seadmeid kasutada ja tõrkeotsingut teha.
Preview PRIME 2 pistikupesaga seinapistik USB-laadijatega – kasutusjuhend ja garantii
Prime Wire & Cable, Inc. toote PRIME 2 pistikupesaga seinapistiku ja USB-laadija (mudel USB05) üksikasjalikud juhised, regulatiivne teave ja garantiitingimused.
Preview PRIME-750B toiteplokk: kiirjuhend ja ohutusteave
PRIME-750B toiteploki põhjalik juhend, mis hõlmab olulist ohutusteavet, paigaldusjuhiseid, komponentide ühendamist, sisselülitamisjuhiseid ja tehnilisi andmeid. Sisaldab üksikasju elektriohutuse, ventilatsiooni, riistvara ühilduvuse ja kaitsefunktsioonide kohta.
Preview PRIME SmartOutletsi paigaldus- ja ohutusteave
PRIME SmartOutlets kaugjuhtimisega õues kasutatavate nutipistikute paigaldusjuhised, ohutusteave ja spetsifikatsioonid. Sisaldab seadistusjuhendit, rakenduse ühendust ja vastavusteavet regulatsioonidele.
Preview Prime TNRCCD21 Plug-in Receiver and Remote Control User Manual
Comprehensive user manual for the Prime TNRCCD21 plug-in receiver and remote control system. Includes setup instructions, operation guide, helpful tips, battery replacement, FCC/IC compliance, and warranty information.
Preview Prime EZ-Set siseruumide digitaalne taimer TNIDP12: kasutusjuhend ja programmeerimisjuhised
User manual and instructions for the Prime EZ-Set Indoor Digital Timer (Model TNIDP12). Learn how to program custom on/off times, use preset options, countdown features, and understand safety guidelines and warranty information.