Gingko GK15R8 Digital Click Clock Instruction Manual

Sissejuhatus

This manual provides comprehensive instructions for the Gingko GK15R8 Digital Click Clock. Please read this manual carefully before use to ensure proper operation and to fully utilize all features of your new clock. This digital clock is designed to display time, date, and temperature with a white LED display, activated by sound or continuous power.

Toote omadused

• Displays time, date, and temperature with automatic switching.
• Activates through sound detection (e.g., a clap or tap) or can be set for continuous display.
• Three independent alarm settings with snooze function.
• Option for 5-day (weekday) or 7-day (every day) alarm activation.
• LED display with dimming capability.

Seadistamine

Pakendi sisu

Veenduge, et kõik esemed on olemas:

• Gingko GK15R8 Digital Click Clock
• USB-toitekaabel
• Kasutusjuhend (see dokument)

Kella sisselülitamine

The clock can be powered via the included USB cable or by batteries (if installed).

1. USB-toide: Connect the USB cable to the DC5V/0.5A port on the back of the clock and plug the other end into a compatible USB power adapter (not included) or a computer USB port.
2. Aku võimsus: Insert 3 AAA batteries (not included) into the battery compartment on the back of the clock, observing correct polarity. Battery power is primarily for backup or temporary use, as continuous display will drain batteries quickly.

Esiosa view of the Gingko GK15R8 Digital Click Clock, showcasing its wood-grain finish and the bright red LED display showing "10:32".

Tagumine view of the Gingko GK15R8 Digital Click Clock, showing the control buttons labeled "SET", "UP", "DOWN", and "V/S", along with the DC5V/0.5A power input port and branding.

Kasutusjuhised

Nuppude funktsioonid

• SET: Enters setting mode, confirms selections, and moves to the next setting option.
• ÜLES: Increases values or navigates up through options.
• ALLA: Decreases values or navigates down through options.
• V/S (Voice/Sound): Toggles sound activation mode or adjusts display brightness.

Kellaaja ja kuupäeva määramine

1. Vajutage nuppu SET Aja seadistamise režiimi sisenemiseks vajutage üks kord nuppu. Tunninumbrid vilguvad.
2. Kasutage UP or ALLA nupud kellaaja reguleerimiseks.
3. Vajutage SET uuesti, et kinnitada tunde ja liikuda minutite seadistamisele. Minutinumbrid vilguvad.
4. Kasutage UP or ALLA nuppe minutite reguleerimiseks.
5. Vajutage SET again to confirm minutes and move to year setting.
6. Continue this process, using ÜLES/ALLA kohandada ja SET to confirm, for Year, Month, and Day.
7. After setting the Day, press SET one last time to exit the time/date setting mode.

Temperatuuri näidik

The clock automatically cycles between time, date, and temperature display. The temperature is shown in Celsius or Fahrenheit, depending on the selected unit.

The Gingko GK15R8 Digital Click Clock displaying the temperature "20°C" in a room setting, highlighting its temperature display feature.

Sound Activation Mode

In sound activation mode, the display will turn off when the room is quiet to save energy. To activate the display, make a sound (e.g., a clap, tap on the clock, or speak loudly).

1. Vajutage nuppu V/S button to toggle between sound activation mode (display turns off) and continuous display mode (display stays on).
2. When the display is off, a sound will activate it for approximately 10-15 seconds before it turns off again.

Alarmi seaded

The clock features three independent alarms (A1, A2, A3).

1. Vajutage nuppu SET button repeatedly until you see "A1" displayed.
2. Vajutage SET again to enter Alarm 1 setting. The hour digits will flash.
3. Kasutage ÜLES/ALLA äratuse tunni määramiseks vajutage seejärel SET.
4. Kasutage ÜLES/ALLA to set the alarm minutes, then press SET.
5. You will then see options for alarm activation: "--:A1" (Alarm 1 OFF), "ON:A1" (Alarm 1 ON for 7 days), or "E:A1" (Alarm 1 ON for 5 days - weekdays only). Use ÜLES/ALLA to select your preference, then press SET.
6. Repeat steps 1-5 for Alarm 2 (A2) and Alarm 3 (A3).
7. To stop a sounding alarm, press any button. To activate snooze, press the ALLA button during the alarm.

The Gingko GK15R8 Digital Click Clock displaying the time "12:02" in a bedroom setting, demonstrating its time display function.

Hooldus

To ensure the longevity and proper functioning of your Gingko GK15R8 Digital Click Clock, follow these maintenance guidelines:

• Puhastamine: Wipe the clock surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish and internal components.
• Paigutus: Asetage kell stabiilsele ja tasasele pinnale, eemal otsesest päikesevalgusest, äärmuslikest temperatuuridest ja kõrgest õhuniiskusest.
• Patarei vahetus: If using battery power, replace all batteries simultaneously when the display dims or functions become erratic. Do not mix old and new batteries or different types of batteries.

Veaotsing

Tehnilised andmed

• Kaubamärk: Gingko
• Mudeli number: GK15R8
• Värv: Black (Note: Product images may show a wood-effect finish)
• Toote mõõtmed: 15 x 4.5 x 10 cm
• Võimsus / vatttage: 11 vatt-tundi
• Materjal: Wood-effect finish
• Eriomadused: Calendar display, Alarm, Snooze, Sound Activation
• Toiteallikas: USB (DC5V/0.5A) or 3x AAA Batteries (not included)
• Kuva tüüp: Digital LED (White LED display as per product description)

Garantii ja tugi

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Gingko websaidile täiendava abi saamiseks.