Reloop RP-8000 Advanced Hybrid Torque Turntable User Manual

Sissejuhatus

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-8000 Advanced Hybrid Torque Turntable. The RP-8000 combines traditional direct-drive turntable functionality with advanced digital control features, making it a versatile tool for DJs and audio enthusiasts.

Palun lugege enne seadme kasutamist see kasutusjuhend hoolikalt läbi, et tagada selle nõuetekohane kasutamine ning maksimeerida selle jõudlust ja pikaealisust.

Ohutusjuhised

• Veenduge, et toiteallikas vastaks mahuletagseadmel määratletud e nõuetele.
• Ärge jätke seadet vihma, niiskuse ega äärmuslike temperatuuride kätte.
• Vältige seadme asetamist soojusallikate lähedusse või otsese päikesevalguse kätte.
• Ärge avage c-dasing; pöörduge kogu hoolduse eest kvalifitseeritud personali poole.
• Always disconnect the power cable before cleaning or moving the unit.
• Hoida lastele kättesaamatus kohas.

Pakendi sisu

Veenduge, et pakendis on kõik esemed olemas:

• Peamine plaadimängija
• Toitekaabel
• USB kaabel
• RCA Cable (with ground wire)
• Slipmat
• Vastukaal
• Headshell (cartridge not included)
• Kasutusjuhend (see dokument)

Toode läbiview

Familiarize yourself with the various components of your Reloop RP-8000 turntable.

Joonis 1: Ülevalt alla view of the Reloop RP-8000 turntable, showcasing the platter, tone arm, pitch fader, and MIDI control section with performance pads.

Joonis 2: Nurga all view of the Reloop RP-8000, highlighting the robust construction, the illuminated platter edge, and the integrated MIDI controls on the left side.

Joonis 3: Rear panel of the Reloop RP-8000, showing the audio output (Phono/Line), USB ports (USB A and TT Link), power input, and power switch. Note the additional start/stop button for vertical setup.

Põhikomponendid:

• Vaagen: Pöörlev pind, kuhu plaadid paigutatakse.
• Toonikäpp: Hoiab helipead ja pliiatsit, järgides plaadi sooni.
• Pigi Fader: Adjusts the playback speed (BPM).
• Start/Stop nupud: Controls platter rotation. An additional button is provided for battle setup.
• MIDI Control Section: Features a Trax encoder, 8 backlit drum pads, and mode selection buttons for software control.
• Phono/Line Output: RCA jacks for audio output, with a switch to select between phono (turntable level) and line (mixer/amp level) output.
• USB-pordid: For connecting to a computer and linking multiple turntables.

Seadistamine

1. Lahtipakkimine ja paigutamine

• Võtke plaadimängija ettevaatlikult pakendist välja.
• Place the unit on a stable, level surface away from direct vibrations.
• Tagage seadme ümber piisav ventilatsioon.

2. Tone Arm and Cartridge Assembly

• Attach your preferred headshell and cartridge (sold separately) to the tone arm.
• Install the counterweight onto the rear of the tone arm.
• Adjust the counterweight to balance the tone arm horizontally. Refer to your cartridge's instructions for recommended tracking force.
• Set the anti-skate dial to match the tracking force.

3. Ühendused

• Audioühendus: Connect the RCA cables from the turntable's PHONO/LINE output to your mixer or ampelujõulisem.
  • If connecting to a PHONO input on your mixer/amp, set the turntable's PHONO/LINE switch to FONO.
  • If connecting to a LINE input, set the turntable's PHONO/LINE switch to JOON.
  • Connect the ground wire to the ground terminal on your mixer/amp to reduce hum.
• USB ühendus: Connect the USB cable from the turntable's USB port to your computer for MIDI control and DVS (Digital Vinyl System) functionality.
• Turntable Link (TT Link): For linking multiple RP-8000 units, connect them in series using standard USB cables. Only one turntable needs to be connected to the computer.
• Toiteühendus: Connect the power cable to the turntable and then to a suitable power outlet.

Kasutusjuhised

1. Põhiline taasesitus

1. Aseta plaat plaadile ja pane libisev alus peale.
2. Select the desired speed (33, 45, or 78 RPM) using the speed selection buttons.
3. Plaadi pöörlemise alustamiseks vajutage nuppu START/STOP.
4. Carefully lower the tone arm onto the record using the cue lever.
5. Adjust the pitch using the pitch fader as needed.

2. Helikõrguse juhtimine

• The pitch fader allows for precise adjustment of playback speed.
• Use the Pitch Range buttons (+/-8%, +/-16%, +/-50%) to select the desired pitch adjustment range.
• The LCD display shows the current pitch percentage.
• Press the Quartz Lock button to return the pitch to 0% (nominal speed).

3. MIDI Control and Performance Modes

The RP-8000 features an integrated MIDI control section for seamless integration with DJ software.

• Trax Encoder: Use this large encoder to browse through playlists and load tracks in your DJ software.
• Performance padjad: The 8 backlit drum pads offer various performance modes:
  • Hot Cue režiim: Trigger up to 8 hot cue points.
  • Silmusrežiim: Set and trigger loops.
  • Sample režiim: Access and play sampvähem.
  • Kasutaja režiim: Freely assign MIDI functions to the pads and other control elements.
  • Dual Performance Mode: Activate two modes simultaneously (e.g., Hot Cue and Loop) by pressing their respective buttons. The pads will be split to control both functions.
• Turntable Link Mode: Connect up to four RP-8000 turntables via USB. The units automatically assign themselves to available decks in your DJ software, requiring only one USB connection to your computer.
• Tagurpidi nupp: Instantly reverses platter rotation.
• Adjustable Start/Stop Time: Use the dedicated dials to fine-tune the platter's start and brake times for customized performance.

Hooldus

• Puhastamine: Seadme pühkimiseks kasutage pehmet ja kuiva lappi. Kangekaelse mustuse korral kasutage kergelt kuiva lappi.amp cloth can be used, but ensure no liquid enters the unit. Avoid abrasive cleaners.
• Pliiatsi hooldus: Regularly clean your stylus with a soft brush designed for this purpose. Replace the stylus when it shows signs of wear to prevent damage to your records.
• Tolmukate: Use a dust cover (if available) when the turntable is not in use to protect it from dust and debris.

Veaotsing

If the problem persists after attempting these solutions, please contact Reloop customer support.

Tehnilised andmed

Garantii ja tugi

For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reloop website. Reloop offers various protection plans for extended coverage, which may be purchased separately.

For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact Reloop customer service through their official webveebisaidilt või volitatud edasimüüjatelt. Hoidke ostutšekk ostutõendina garantiinõuete korral.

Märkus. The user manual (PDF) is also available for download at https://manuals.plus/m/8eb0b60ccb1c6d10ac93577b129a938bfbac889fdb461902d354afc8d19b78dd.