Sissejuhatus
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Teka Baltic Sport Shower Set model 790026700. Please read this manual carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Ohutusteave
- Enne paigaldus- või hooldustööde alustamist lülitage alati välja peamine veevarustus.
- Veenduge, et kõik ühendused oleksid kindlalt paigas, et vältida lekkeid.
- Ärge kasutage kroompinna puhastamiseks abrasiivseid puhastusvahendeid ega karme kemikaale, kuna see võib seda kahjustada.
- Kui te pole paigaldusprotsessi mis tahes osas kindel, pidage nõu kvalifitseeritud torulukksepaga.
Pakendi sisu
Enne paigalduse alustamist veenduge, et kõik komponendid on olemas:
- Shower Set (including shower head, hose, and rail)
- Paigaldusriistvara
- Paigaldusjuhend (see dokument)
Seadistamine ja installimine
Follow these steps for proper installation of your Teka Baltic Sport Shower Set:
- Valmistage ette paigaldusala: Turn off the main water supply. Clear the area where the shower set will be installed.
- Mount the Shower Rail: Position the shower rail on the wall at the desired height. Mark the drilling points for the mounting brackets. Drill holes and insert wall plugs. Secure the mounting brackets to the wall using the provided screws.
- Attach the Shower Rail: Slide the shower rail onto the mounted brackets and secure it according to the specific design of your rail.
- Connect the Shower Hose: Attach one end of the 175 cm braided steel hose to the shower mixer outlet (not included) and the other end to the shower head. Ensure all connections are hand-tightened, then use a wrench to gently tighten further, being careful not to overtighten.
- Place the Shower Head: Insert the shower head into the adjustable holder on the shower rail.
- Lekete test: Turn on the main water supply and check all connections for any leaks. If leaks occur, tighten the connections slightly until they stop.
Image 1: The complete Teka Baltic Sport Shower Set, including the shower rail, adjustable holder, and round shower head, ready for installation. This image illustrates the components that need to be assembled and mounted on the wall.
Kasutusjuhised
The Teka Baltic Sport Shower Set is designed for ease of use:
- Adjusting Water Flow and Temperature: Use your existing shower mixer (not included) to control the water flow and temperature.
- Using the Shower Head: The round shower head features an anti-limescale system. Water sprays from multiple nozzles.
- Adjusting Shower Head Height: The shower head holder on the rail can be easily adjusted up or down to suit individual preferences. Simply press the release button or lever on the holder and slide it to the desired position.
Image 2: A close-up front view of the Teka Baltic Sport round shower head, showcasing its multiple nozzles and anti-limescale design.
Pilt 3: A-külg view of the Teka Baltic Sport shower head, highlighting its ergonomic handle and chrome finish.
Hooldus
Regular cleaning and maintenance will ensure the longevity and appearance of your shower set:
- Kroomitud viimistluse puhastamine: Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry immediately to prevent water spots.
- Katlakivivastane süsteem: The shower head is equipped with an anti-limescale system. Periodically rub the rubber nozzles on the shower head to dislodge any mineral deposits. For stubborn deposits, a solution of white vinegar and water can be used, but ensure it is rinsed off completely.
- Vooliku hooldus: Inspect the braided steel hose periodically for any signs of wear or damage. Replace if necessary.
Veaotsing
Siin on lahendused levinud probleemidele, millega võite kokku puutuda:
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Low water pressure from shower head | Clogged nozzles or mineral buildup. | Clean the shower head nozzles by rubbing them to remove limescale. If necessary, soak the shower head in a descaling solution. |
| Vesi lekib ühendustest | Lahtised ühendused või kulunud seibid. | Ensure all connections are tightened properly. Check and replace any worn rubber washers. |
| Shower head not staying in position | Holder mechanism is loose or worn. | Tighten the holder mechanism if possible. If worn, the holder may need replacement. |
Tehnilised andmed
| Funktsioon | Detail |
|---|---|
| Kaubamärk | Teka |
| Mudeli number | 790026700 |
| Värv | Chrome |
| Viimistluse tüüp | Kroomitud |
| Käepidemete arv | 1 (for shower mixer, not included) |
| Kauba kaal | 5.8 kilogrammi |
| Vooliku pikkus | 175 cm (Braided Steel) |
| GTIN | 08413509203667 |
| Tootja | Teka |
Garantii ja tugi
For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Teka webveebisait. Hoidke ostutõendit alles garantiinõuete esitamiseks.
