LD Systems LDWSECO2X2R2 Double Receiver User Manual

Sissejuhatus

Thank you for choosing the LD Systems LDWSECO2X2R2 Double Receiver. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

Olulised ohutusjuhised

• Lugege neid juhiseid: Enne toote kasutamist tuleb läbi lugeda kõik ohutus- ja kasutusjuhised.
• Keep these instructions: Ohutus- ja kasutusjuhised tuleks edaspidiseks kasutamiseks alles hoida.
• Võtke arvesse kõiki hoiatusi: Järgida tuleb kõiki tootel ja kasutusjuhendis olevaid hoiatusi.
• Järgige kõiki juhiseid: Järgida tuleb kõiki kasutus- ja kasutusjuhiseid.
• Ärge kasutage seda seadet vee lähedal: Ärge kasutage seda toodet vee või niiskuse läheduses.
• Clean only with dry cloth: Enne puhastamist eemaldage see toode seinakontaktist.
• Ventilatsioon: Ärge blokeerige ühtegi ventilatsiooniava. Paigaldage vastavalt tootja juhistele.
• Toiteallikad: Kasutage seda toodet ainult märgistusel näidatud tüüpi toiteallikast.
• Teenindus: Ärge püüdke seda toodet ise hooldada, kuna kaante avamine või eemaldamine võib teid ohustadatage või muud ohud. Andke kõik hooldustööd kvalifitseeritud teeninduspersonalile.

Pakendi sisu

Palun kontrollige, kas kõik allpool loetletud esemed on teie pakendis olemas:

• LD Systems LDWSECO2X2R2 Double Receiver Unit
• Power Adapter (12-18V DC, 300mA)
• Kasutusjuhend (see dokument)
• Antennas (quantity may vary based on model variant)

Toode läbiview

The LD Systems LDWSECO2X2R2 is a double receiver designed for wireless audio transmission. It operates on frequencies 863.900 MHz and 864.900 MHz, providing reliable signal reception for professional audio applications.

Pilt: Esikülg view of the LD Systems LDWSECO2X2R2 Double Receiver, showing controls and display.

Esipaneeli juhtnupud:

• Toitenupp: Lülitab seadme sisse või välja.
• Kanali ekraan: Shows the currently selected channel for each receiver.
• Helitugevuse regulaatorid: Independent volume adjustment for each receiver channel.
• RF/AF Indicators: LEDs indicating RF signal presence and AF audio level.

Tagapaneeli ühendused:

• Antenni sisendid: Ühendage kaasasolevad antennid.
• Tasakaalustatud XLR-väljundid: For connecting to professional audio mixers or ampelupäästjad.
• Unbalanced 1/4" Jack Outputs: Alternative audio output connections.
• DC toite sisend: Ühendage kaasasolev toiteadapter.

Seadistusjuhend

Follow these steps to set up your LD Systems LDWSECO2X2R2 Double Receiver:

1. Unpack the Receiver: Eemaldage ettevaatlikult kõik komponendid pakendist.
2. Ühendage antennid: Screw the supplied antennas onto the antenna inputs located on the rear panel. Ensure they are securely fastened.
3. Vastuvõtja paigutamine: Place the receiver in a stable location, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure good line-of-sight to the intended transmitter.
4. Ühendage heliväljundid:
   • For balanced connections, use XLR cables to connect the receiver's XLR outputs to your mixer or ampelujõulisem.
   • For unbalanced connections, use 1/4" jack cables to connect the receiver's 1/4" outputs to your audio equipment.
5. Ühendage toide: Connect the provided DC power adapter to the receiver's DC power input. Plug the adapter into a suitable power outlet.
6. Toide sisse: Press the power button on the front panel to turn on the receiver. The display should illuminate.
7. Pair with Transmitters: Refer to your transmitter's manual for instructions on how to pair it with the receiver. Ensure the transmitter and receiver are set to the same frequency/channel.

Kasutusjuhised

1. Toide sisse: Ensure both the receiver and your wireless transmitters are powered on.
2. Kontrollige signaali: Observe the RF (Radio Frequency) indicator on the receiver. It should illuminate steadily when a signal from the paired transmitter is detected.
3. Helitugevuse reguleerimine: Use the independent volume controls on the front panel to set the desired audio output level for each channel. Start with a low volume and gradually increase it to avoid sudden loud sounds.
4. Monitori heli: The AF (Audio Frequency) indicator will light up when audio is being received. Ensure your audio equipment (mixer, amplifier) is also properly configured to receive the signal.
5. Channel Selection (if applicable): If your model supports manual channel selection, refer to the specific instructions for changing frequencies to avoid interference. The LDWSECO2X2R2 operates on fixed frequencies 863.900 MHz and 864.900 MHz.
6. Toide välja: When finished, power off your transmitters first, then power off the receiver.

Hooldus

• Puhastamine: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the receiver. Do not use liquid cleaners or aerosol sprays.
• Hoiustamine: When not in use for extended periods, store the receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
• Antennid: Ensure antennas are not bent or damaged. Replace if necessary to maintain optimal signal reception.
• Toiteadapter: Regularly inspect the power adapter and cable for any signs of damage. Do not use a damaged adapter.

Veaotsing

Tehnilised andmed

Garantii ja tugi

LD Systems products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official LD Systems website. For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your local dealer or the LD Systems customer service department.

Märkus: Varuosade saadavuse kohta käivat teavet toote üksikasjades ei ole esitatud.