1. Sissejuhatus
This manual provides instructions for the safe and efficient operation of your Intermec Easycoder PC41 Thermal Label Printer. The PC41 is a desktop barcode label printer designed for direct thermal printing, featuring a 4-inch print width and multiple connectivity options including Serial, Parallel, and USB interfaces. Please read this manual thoroughly before operating the device.
2. Ohutusalane teave
Vigastuste ja printeri kahjustamise vältimiseks järgige järgmisi ohutusnõudeid:
- Ühendage printer alati maandatud pistikupessa.
- Do not operate the printer in wet or excessively humid environments.
- Hoidke printerit otsese päikesevalguse ja soojusallikate eest.
- Tagada printeri ümber korralik ventilatsioon.
- Enne puhastamist või hooldust ühendage seade vooluvõrgust lahti.
- Vältige prindipea puudutamist kohe pärast printimist, kuna see võib olla kuum.
3. Pakendi sisu
Veenduge, et pakendis on kõik esemed olemas:
- Intermec Easycoder PC41 Thermal Label Printer
- Power Cord (US Power Cord)
- USB kaabel
- Kiirjuhend (võib olla kaasas)
- Driver CD (may be included, or drivers available online)
4. Seadistamine
4.1 Lahtipakkimine ja paigutamine
Carefully remove the printer from its packaging. Place the printer on a stable, level surface with adequate space for label loading and output.
4.2 Toite ühendamine
- Connect the power cord to the printer's power input port.
- Ühendage toitejuhtme teine ots maandatud pistikupessa.
- Printeri sisselülitamiseks vajutage toitenuppu.
4.3 Arvutiga ühendamine
The PC41 printer supports USB, Serial, and Parallel connections.
- USB ühendus: Ühendage USB-kaabli üks ots printeri USB-porti ja teine ots arvuti vabasse USB-porti.
- Jadaühendus: Connect a serial cable (not included) to the printer's serial port and to your computer's serial port.
- Paralleelühendus: Connect a parallel cable (not included) to the printer's parallel port and to your computer's parallel port.
4.4 Siltide laadimine
The PC41 is designed for direct thermal labels. Ensure the labels are compatible with direct thermal printing.
- Avage printeri ülemine kaas.
- Place the roll of labels onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
- Feed the leading edge of the labels through the media guides and under the print head assembly.
- Adjust the media guides to fit the width of your labels snugly but without restricting movement.
- Close the top cover. The printer may automatically calibrate or feed a few labels.
Figure 1: Intermec Easycoder PC41 Thermal Label Printer in operation, showing a label exiting the printer. This image illustrates the compact design and the label output mechanism.
4.5 Draiveri installimine
Install the appropriate printer drivers on your computer. Drivers are typically available on a provided CD or can be downloaded from the Intermec (now Honeywell) support website. Follow the on-screen instructions for driver installation.
5. Kasutusjuhised
5.1 Põhiprintimine
- Veenduge, et printer on sisse lülitatud ja arvutiga ühendatud.
- Load the desired labels into the printer.
- Avage oma siltide kujundamise tarkvara või rakendus.
- Select the Intermec PC41 as your printer.
- Configure print settings such as label size, orientation, and quantity.
- Initiate the print job from your software.
5.2 Märgutuled
Printeril on olekuindikaatorid:
- Tahke roheline: Printer is ready.
- Vilkuv roheline: Data is being received or processed.
- Ühtlane punane: Error condition (e.g., out of labels, cover open). Refer to troubleshooting.
- Vilkuv punane: Print head overheating or other critical error.
6. Hooldus
Regulaarne hooldus tagab optimaalse jõudluse ja pikendab printeri eluiga.
6.1 Prindipea puhastamine
The print head should be cleaned periodically, especially if print quality degrades.
- Turn off and unplug the printer.
- Avage ülemine kaas.
- Using a lint-free cloth or a print head cleaning pen moistened with isopropyl alcohol, gently wipe the print head surface.
- Enne kaane sulgemist ja printeri sisselülitamist laske prindipeal täielikult kuivada.
6.2 Üldpuhastus
Pühkige printeri välispinda pehme lapigaamp riie. Ärge kasutage abrasiivseid puhastusvahendeid ega lahusteid.
7. Veaotsing
This section addresses common issues you might encounter with your PC41 printer.
| Probleem | Võimalik põhjus | Lahendus |
|---|---|---|
| Printer ei lülitu sisse. | Toitejuhe pole ühendatud; pistikupesa on vigane. | Veenduge, et toitejuhe on kindlalt ühendatud. Testige pistikupesa teise seadmega. |
| No labels are printing. | Out of labels; labels loaded incorrectly; printer not connected to computer; driver issue. | Load new labels correctly. Check cable connections. Reinstall printer drivers. |
| Halb prindikvaliteet (pleekinud, jooned). | Dirty print head; incorrect media type; print head wear. | Clean the print head (see Section 6.1). Ensure correct direct thermal labels are used. If issue persists, contact support. |
| Printer status light is red. | Cover open; out of labels; media jam. | Close the top cover. Load labels. Clear any jammed media. |
8. Tehnilised andmed
Key technical specifications for the Intermec Easycoder PC41 Thermal Label Printer:
- Mudeli nimi: PC41A000000
- Kaubamärk: Intermec (now Honeywell)
- Trükitehnoloogia: Otsene termiline
- Printeri väljund: Ühevärviline
- Prindilaius: 4 inches (as per description)
- Mälu: 512KB RAM / 1MB Flash (as per description)
- Ühenduvustehnoloogia: USB, Serial (IEEE 1284), Parallel
- Ühilduvad seadmed: PC
- Trükimeedia: Sildid
- Kauba kaal: 8.8 naela
- Esimene saadaval: 18. juuni 2014
9. Garantii ja tugi
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Honeywell (formerly Intermec) support websaidile. Hoidke ostutšekk alles garantiinõuete esitamiseks.
