DISH DISH211 4-Device Universal Remote User Manual

Sissejuhatus

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your DISH DISH211 4-Device Universal Remote. Designed for ease of use, this remote supports DISH TV receivers and can control up to four different devices, including TVs and other entertainment systems. Its ability to learn commands from original remotes makes it a versatile replacement.

Figure 1: The DISH DISH211 4-Device Universal Remote, showcasinselle ergonoomiline disain ja nuppude paigutus.

Seadistamine

1. Aku paigaldamine

The DISH211 remote requires two (2) AA batteries for operation. To install:

1. Leidke kaugjuhtimispuldi tagaküljel olev patareipesa.
2. Slide the battery cover downwards and lift to open.
3. Sisestage kaks AA-patareid, veendudes, et positiivsed (+) ja negatiivsed (-) klemmid joonduvad sahtlis olevate indikaatoritega.
4. Paigaldage akukate tagasi, libistades seda ülespoole, kuni see klõpsuga oma kohale lukustub.

2. Device Pairing and Programming

The DISH211 remote can be programmed to control your DISH receiver and other devices. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication, depending on your receiver model.

Figure 2: Cover of the official DISH Remote User Guide, which provides detailed programming instructions.

For DISH Receiver Pairing (UHF/IR):

Some DISH receivers may require setting the remote's address and communication type (UHF or IR). A small switch near the battery compartment may allow selection between UHF and IR modes. Ensure this switch is set correctly for your receiver type.

To address the remote to your receiver:

1. Vajutage nuppu Süsteemiteave button on the front of your receiver to access the system information screen.
2. Vajutage ja hoidke all nuppu SAT button on the remote until all mode lights illuminate.
3. Enter a number between 1-15 on the remote keypad. This number corresponds to the TV-2 UHF address displayed on your receiver's screen.
4. Vajutage nuppu # (pound) button once.
5. Vajutage nuppu Salvestus kolm korda nuppu.
6. Valige Valmis on the system info screen and test the remote's functionality.

For Other Devices (TV, DVD, AUX):

The remote has a large code library and can learn commands from your original remotes. Refer to the official DISH remote user guide (often included with the product or available online) for specific programming codes and learning instructions for various brands and device types.

Figure 3: The back of the DISH remote packaging, indicating compatible DISH receiver models for both IR and IR/UHF configurations.

Kasutusjuhised

The DISH211 remote is designed for intuitive control of your entertainment system. It features backlit active MODE keys for visibility in low light conditions and dedicated DVR controls.

1. Režiimi valik

Press the desired mode button (e.g., SAT for DISH receiver, TV televisiooni jaoks, DVD for DVD player, AUX for auxiliary device) at the top of the remote to select the device you wish to control. The selected mode button will illuminate.

2. Põhilised juhtnupud

• Võimsus: Vajutage nuppu VÕIMSUS nuppu valitud seadme sisse- või väljalülitamiseks.
• Maht: Kasutage HELI SUURENDAMINE/VÄHENDAMINE buttons to adjust the audio level of your television.
• Kanal: Kasutage KANAL ÜLES/ALLA buttons to change channels on your DISH receiver or television.
• Vaigista: Vajutage nuppu Vaigistama nuppu heli vaigistamiseks.
• Sisend: Vajutage nuppu SISEND button to cycle through video inputs on your television.

3. DVR Controls

The remote includes dedicated buttons for DVR functionality:

• Salvestus: Käivitab praeguse saate salvestamise.
• Esita/peata: Starts or pauses playback of recorded content or live TV.
• Peatus: Peatab taasesituse.
• Keri tagasi/keri edasi: Controls playback speed and direction.
• Skip Forward (DISH Skip Forward): Allows quick skipping through commercials or segments.
• Jäta tagasi: Skips backward in recorded content.

Joonis 4: Lähivõte view of the DISH DISH211 remote, highlighting the central navigation and DVR control buttons.

Hooldus

1. Aku vahetamine

When the remote's performance degrades or buttons become unresponsive, it is likely time to replace the batteries. Follow the battery installation steps outlined in the Setup section.

2. Puhastamine

To clean your remote, gently wipe the surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using excessive liquid or harsh chemicals, as these can damage the remote's electronics or finish.

Veaotsing

Kaugjuhtimispult ei reageeri

• Kontrollige patareisid: Veenduge, et patareid on õigesti paigaldatud ja piisavalt laetud. Vajadusel vahetage patareid välja.
• Line of Sight (IR): If using IR mode, ensure there is a clear line of sight between the remote and the device's IR receiver. Obstructions can block the signal.
• Režiimi valik: Verify that the correct mode button (e.g., SAT, TV) is selected for the device you are trying to control.
• Remote Address/UHF-IR Switch: For DISH receivers, confirm the remote's address is correctly set and the UHF/IR switch (if present) matches your receiver's configuration. Incorrect settings can prevent communication.

Katkendlik funktsionaalsus

• Häired: Other electronic devices or strong light sources (like plasma TV IR interference) can sometimes interfere with IR signals. Try operating the remote from a different angle or location.
• DVR Directory Update: If experiencing lag or unresponsiveness with DVR functions, ensure your DVR's directory is updated. Consult your DISH receiver's manual for instructions on updating its software or directory.

Nupud ei tööta

• Puhas kaugjuhtimispult: Dirt or debris under buttons can cause them to stick or become unresponsive. Clean the remote as described in the Maintenance section.
• Ümberprogrammeerimine: If specific buttons for a device are not working, the remote may need to be reprogrammed for that device.

Tehnilised andmed

Garantii ja tugi

Garantii teave

The DISH DISH211 Universal Remote typically comes with a Piiratud 90-päevane garantii. Please refer to the documentation enclosed with your product for specific terms, conditions, and details regarding warranty claims.

Klienditugi

For further assistance with programming, troubleshooting, or general inquiries, it is recommended to consult the official DISH Network support resources. This may include their website, online user guides, or customer service contact information. The manufacturer of this product is Audiovox Accessories Corporation.